Geekvape WENAX U Pod Kit of vape shops is an all-new portable pod system that comes with Geekvape U Cartridge. This eye-catching pod has side switch for adjusting airflow and a function button for 3-level output adjustments and pow er-on/off. It serves long with 1000mAh battery and looks fashion with lanyard that comes with the package. Enjoy a fashion vape!

The Geekvape Wenax U vape kit is a compact pod device that is a good choice for vapers of all experience levels as it requires very little maintenance and is easy to use. This kit is powered by a 1000mAh battery and has a max power output of 20W, which is ideal for MTL (Mouth To Lung) and RDTL (Restricted Direct To Lung) vaping. The Wenax U kit also features 3 power modes (low, medium and high) and is compatible with GeekVape U replacement pods, plus one is included to help you get started.

The Wenax U Vape kit is simple to use and easy to maintain. Thanks to inhale activation, you only need to puff on the mouthpiece to vape. There are no tricky menus to navigate either, just a single button to adjust the power output of the Wenax U. A 0.7 Ohm GeekVape U pod is included with this kit and allows for an RDTL inhale, which creates a small amount of vapour.

Geekvape Wenax U Specifications:
Weight: 50.6g (with U Cartridge)
Power Output: 20W Max Output
Cartridge Capacity: 2ml
Charging Port: Type C
Coil Lifespan: Up to 10ml
Battery Capacity: 1000mAh
Coil Resistance: 0.70/1.10
Low Voltage Warning: 3.2±0.1V

Features:
Function Button
Auto Draw
3-level Output Adjustments
Adjustable Airflow
Built-in 1000mAh Battery
Fashion Lanyard



Recommended products:
freemax marvos x pro
smok rpm 100

Freemax has released another new generation of pod systems - Galex Nano Kit. It is a box-shaped and draw-activated pod system kit with Freemax's typical full-spectrum lighting design, which is also inspired by the vast galaxy.



It features a 2mL top-filling Galex Pod and an 800mAh rechargeable Galex Nano Battery with a USB Type-C port.

As for the Galex Pod, it applies FM SaltCoilTech 4.0 technology, a newly-upgraded mesh coil technology that increases tea fiber content by 50% and uses innovatively-quenched SS904L mesh to bring purer flavors and extend the coil’s lifespan. It also currently comes in 0.8ohm and 1.0ohm. What’s more, it is equipped with FM Leak-Resistant Tech with a top filling system, simple and safe to use.

As for the Galex Nano Battery, it supports variable wattage at three levels between 11-22W and is equipped with a colorful lighting design for a shining appearance and a better interactive vaping experience. The light has multicolor and unicolor modes that can be switched or turned off by double-clicking the side button.

As for you, Freemax Galex or Galex Nano Pod System, which do you like better? Welcome to leave your comment below.

This thread is for the general discussion of the pod vape Freemax Galex Nano Kit : Explore Ultra Mouth-to-Lung Solution. Please add to the discussion here.

Ran out of Nude Nicotine's Nicotine Base 6mg/mL ❄ USP Pharma × 1, 500ml / 70% VG/30% PG - went to reorder and wanted to stock up for 5-10 years (in case vape ban craziness gets even worse, if possible). NN replied "The oxidation life on nicotine will only be fridge/freezer friendly for little over a year, so unfortunately you would be doing your nicotine a disservice by trying to have a stock that large for that amount of time" - this is totally contrary to what this DIY forum members' experiences are - why would they say this - and should I change vendors?

I vape 6mg juice at 5ml/day so would like to buy enough Nicotine Base and PG and VG to last 10 years which would be about 1 liter of 100mg base - correct?

Due to my ever increasing hand tremor, my fear is that I'd make a mess of things and lose too much product while trying DIY (no family nearby to help and friends hate that I vape, sigh). So I'm thinking a base much weaker than 100mg - maybe 36mg or 48mg nicotine base (limited freezer space now)? I'd also like the best, purest products (have ongoing stomach problems, sigh again).

What would be the best nicotine configuration I should buy to mix down to 6mg at 70VG 30PG the easiest way - and vendor recommendations (must be able to ship to CA)? Any help would be much appreciated (hopefully simple).

It seems like all the new vapes that have come out recently are more or less the same as the ones that have already been around the last couple years, like vaping has reached a technological plateau. Is that accurate or do you foresee any future advances like we constantly see with cellphones and computers?

This thread is for the general discussion of the pod vape Geekvape GEEKVAPE AU (Aegis U): Once for All. Aegis for U.. Please add to the discussion here.

This thread is for the general discussion of the pod vape Geekvape GEEKVAPE WU (Wenax U): Once for All. Wenax for U.. Please add to the discussion here.

This thread is for the general discussion of the pod vape Geekvape GEEKVAPE OU (Obelisk U): Once for All. Obelisk for U.. Please add to the discussion here.

Smoktech SMOK RPM 100 100W VW Pod System Mod Kit
authentic / 6ml / 0.15ohm & 0.23ohm RPM 3 meshed coils / stepless airflow control / child-resistant / 1*21700/18650 / 1.5A USB-C charging


Details:
The best combo of RPM 85 and RPM 100 gives you a glimpse into a new world, with rotating air intakes that provide stepless airflow control at every turn. Elegantly rounded corners provide the finishing touch, exuding a highly satisfying look and feel. RPM 85 is powered by built-in 3000mAhbattery, while RPM 100 is driven by a single external 21700/18650 battery that provides supplemental energy when out and about. Innovation keeps changing the vaping experience!

Features:
Well-Crafted To Double Down On Experiences: RPM 85/RPM 100 features IML (In Mould Labeling) technique, highlighting its superior craftsmanship. The crafted form of electroplating shell is as dazzling as it is durable and wear-resistant.
0.96Inch TFT Color Display: The 0.96inch TFT display with whole new user interface enhancesthe entire experience, making all vape data easier to use and read.
Enhanced Convenience & Longer Lifespan: RPM 85 is equipped with a built-in 3000mAh battery which takes care of sustainable power demanding, while the RPM 100 can be powered by an external 21700 or 18650 battery with an adapter.
Rotary Air-Inlet Ring: Adjust the air flow with the rotary air-inlet ring on top of the device section.
Strong Magnetic Connection: Strong magnets between the pod and the device not only facilitate the connection, but also enhance the tightness.
Lock The Risk, Unlock The Safety: The RPM 85/100 Pod is equipped with ingenious locks that enhance the child safety in case of accidental removal of the coil head resulting in leakage of e-liquid, while preventing children from easily accessing the e-liquid filling.
Relish The Moment With 6ml Juice: The RPM 85/100 pod stands out in the RPM collection, with an amazing 6ml juice capacity that guarantees a long-lasting vaping enjoyment.
Value Your Device Security: Smart detection helps to better understand the device status. RPM 85/ RPM 100 provides you with fundamental security services.
High-temperature Protection
8-second Cut Off
Pod Detection
Short Circuit Protection
Low Voltage Protection

Specifications:
Power Output: 5W-100W
Input Voltage: 3.3V-4.2V
Output Voltage: 0.8V-4.0V
Standby Current: <100uA
Max Output Current: <25A
Resistance Range: 0.15-2.50ohm
Charging Voltage: 5V±0.2V
Charging Current: Max 1.5A

Smoktech SMOK RPM 85 / RPM 100 Replacement Empty Pod Cartridge

The KROS Mini is a rechargeable disposable vape that can be used for 4000 puffs. It is based on the popular Vaporesso Xros Mini and is powered by Smoore.


Features
• 4000 Puffs
• 10ml Capacity
• 5%(50mg) Nicotine Strength
• Rechargeable Battery
• MTL Draw
• Draw-activated

The KROS Mini disposable has a 650mAh battery, a USB-C port for charging, and 10ml vape juice with 5% salt nicotine. This disposable, draw-activated cigarette comes in a package that won't leak and in many great flavors.

Click vape shops near me to learn more details.

You may also like:

aegis t200 vape mod
vibez air nft

FLUM introduces the FLUM Pebble, a 6000 puffs rechargeable disposable vape from online vape shop thus far. The FLUM Pebble packs in 14ml of vape juice at 5% nicotine, paired with a mesh coil for ultimate flavor and vapor delivery. Powering the Pebble is a 600mAh internal battery which is rechargeable via USB-C.

It's time FLUM fans; everything you love about the FLUM Float and FLUM Gio, now in a bigger and better disposable device! The FLUM Pebble 5mg disposable vape has the same perfectly balanced draw that FLUM is known for, and super smooth flavorful vapor. Try the new FLUM Pebble today in all 7 of the release series flavors!

The Flum Pebble Disposable Vape by Flum Vapor is a brilliant device added to its roster. The Pebble is the best product its developed yet, as it features a more appealing design, it has a larger capacity, higher puff count, better performance, it's safer to use, and the flavor options are magnificent. If you're looking for a new disposable vape to add to your own collection of favorites, we urge you to consider to newly released all-day vape!

flum pebble Specifictions:
Puff count: 6000 puffs
Milliter: 14ml
Nicotine strength: 50mg
Nicotine type: Tobacco free

Features:
14mL Prefilled E-Liquid Capacity
Mesh Heating Element
Integrated 600mAh Battery
Approximately 6000 Puffs
5% Nicotine Concentration
Type-C USB Port



Recommended products:
esco bars mega 5000
bored ape vape

Could you find the difference between these two Eleaf iJust D20?
And please tell me which one do your prefer.

Click here to know more about iJust D20.

Hi,Geekfans~I have a question to ask for help! If you had a choice of battery specifications, which one would you want the most? Comment below~~
#geekvp #Geekvape #geekup

SMOK RPM 85 Kit

RPM 85 Kit is powered by a built-in 3000mAh battery with 85W max and 1.5A Type-C fast charging. With 0.96'' inch TFT color display screen, it can clearly show you the vaping data. The multiple protections also makes it safe to use. RPM 85 also features rotating air intakes that provide stepless airflow control at every turn. Two kinds of RPM 85/100 Pods are suitable for RPM 85 Kit: one is compatible with RPM 3 Coils (included) and the other is compatible with RPM 2 Coils (sold separately). RPM 85/100 Pod has large 6ml e-juice capacity and safe&hygienic top filling system. It also adopts child-resistant design to prevent the children from accidental removal of the coil head and easily accessing the e-liquid filling. In addition, RPM 85 Kit features IML (In Mould Labeling) technique to become dazzling in appearance and durable in use. Just get it.

Details:
1. Built-in 3000mAh battery with 85W max
2. 1.5A Type-C fast charging
3. 0.96 inch TFT color display screen
4. IML (In Mould Labeling) technique
5. Stepless airflow control
6. Adjust the airflow with rotary air-inlet ring
7. Strong magnetic connection
8. Child-resistant pod design
9. Large 6ml e-juice capacity
10. Safe and hygienic top filling system
11. Fit for SMOK RPM 85/100 Empty Pod
12. Fit for SMOK RPM 2/3 Coil
13. Smart detection for better user-experience




SMOK RPM 100 Kit

RPM 100 Kit utilizes IML (In Mould Labeling) technique, which makes it durable and wear-resistant. And the 0.96 inch TFT display screen makes all vape data easier to use and read. Smok rpm 100 kit is driven by single 21700 or 18650 battery. You can adjust the airflow with the rotary air-inlet ring on the top of the device section. Two pods are suitable for RPM 100 Kit: one is compatible with RPM 3 Coils (included), one is compatible with RPM 2 Coils (sold separately). There has strong magnets between pod and device to enhance the tightness. In addition, with the ingenious locks, the pod is child-resistant. 6ml e-liquid capacity will provide a long-lasting vaping for you.

Details:
1. Stepless airflow control
2. Child-resistant pod design
3. 6ml e-juice capacity
4. Slide-to-open top filling system
5. Type-C 1.5A fast charging
6. Single external 21700/18650 battery
7. 0.96 inch TFT color display
8. Strong magnetic connection
9. Compatible with dual pods: one for RPM 3 coil, one for RPM 2 coil
10. Safety protection: High-temperature/8S Cut off/Pod Detection/Short Circuit/Low Voltage Protection

Elux Flow 600 Disposable is designed to offer you a variety of flavours, incorporating fruit, dessert as well as ice flavours. As a compact disposable, flow 600 comes with a compact design and a stylish graphic style. The thin, narrow mouthpiece gives you a fine, silky feel when inhaling. Compatible with a 550mAh battery and can be inhaled up to 600 puffs. Of the 10 flavours on offer, I would like to highlight a few.


Grape Raspberry has a juicy purple grape taste and a delicious raspberry taste, sweet and ripe is its highlight.

Lychee Ice is an exotic fruit blend that captures the delicate aromas of lychee, with floral notes and sweetness as its hallmark, and the characteristic ice as its base, making it a delightful treat for the palate.

Strawberry Energy, on the other hand, is a mixed drink taste that captures the juicy aroma of summer strawberries and the strong topping of an energy drink, a sweet and refreshing blend that is tried and tested.

As you know, cheap disposable vapes come and go and are updated quickly, but the taste is the most memorable point that captures the user, and I think the surprise will only come to you if you try it.

You may also be interested in:
elux kov bar disposable
drag e60 voopoo

Hi, today let's take a look at the Zovoo Dragbar B5000. In this Test I will examine each of the characteristics that distinguish this item. I hope that by the end of this reading you may have understood this product, and therefore decide whether to invest in it or not. As always, my opinions are free and based on my personal experience.
• Enjoy the reading.

► Zovoo Dragbar B5000; Before starting let's see together some special features indicated by the manufacturer:
• Cute and Compact
• 10 New Mixed Flavors
• Mesh Coil and Orignal Taste
• Symmetric Structure, Color Contrast Design
• 5000 Puffs
• 13ml e-juice
• 500mAh
• Type-C Fast Charge



► Zovoo Dragbar B5000; Packaging:
From a purely single-use product like this one certainly does not expect a sumptuous packaging, however the small multicolored cardboard clearly suggests what will be inside it, the packaging is nice and shows the image of this item and many others information.



► Zovoo Dragbar B5000; Packing List:
• 1x ZoVoo Drag Bar B5000 Puff Disposable
• User Manual



► Zovoo Dragbar B5000 is also available for sale in the pack of 10 pieces:



► Zovoo Dragbar B5000; Technical data:
• Dimensions: 79.6x44x22.6mm
• Weight: 54g
• 1x ZoVoo Drag Bar B5000 Puff Disposable
• E-juice capacity: 13ml
• Mesh-Coils 1.1Ω-1.3Ω
• Strength of nicotine: 0mg / ml, 20mg / ml, 50mg / ml
• Battery capacity: 500mAh
• Type-C charging port



► Zovoo Dragbar B5000; Introduction:
The Zovoo brand has recently reached an important milestone in the sales of Dragbar series products with the remarkable figure of 1,000,000 pieces sold in more than 50 countries and regions such as North America, Europe and Southeast Asia. Furthermore, the Zovoo brand recently won the Best Newcomer of Vapourround Awards 2022. In fact, on May 27th the Vaper Expo UK was successfully held in Birmingham with the presence of over 1000 international vaping brands and with over 100,000 professional visitors who attended the show. The exhibition lasted 3 days and on the second day, Vapouround, the world's leading media in the electronic atomization sector, announced the winners and ZOVOO took first place in the Best Newcomer category.



On September 5th, ZOVOO released a new disposable product from the DRAGBAR series, DRAGBAR B5000, in addition to the excellent taste and performance it inherits from the DRAGBAR family. DRAGBAR B5000 offers 13ml of large capacity and up to 5000 disbursements, meeting a long lasting vaping experience. Equipped with 500mAh battery capacity, Type-C fast charging, so that a pleasant vaping can last longer.



DRAGBAR B5000 is the first box-shaped design electronic cigarette of the DRAGBAR family. It has a compact size that fits in the palm of your hand better than ever. The body of DRAGBAR B5000 has an exquisitely sculpted satin texture that is gentle on the skin, giving it a satin sheen and silky grip feel.





► Zovoo Dragbar B5000; How it is made:
With the well-designed symmetrical box structure, DRAGBAR B5000 organically integrates craftsmanship and technology, delivering a comfortable gripping experience and strong visual impact. It adopts two-tone injection technology and dynamic contrast colors, showing the extraordinary momentum of the trend creators.





Zovoo Dragbar B5000 adopts clear "crystal like" mouthpiece and fits your lips perfectly with better wrapping and better inhalation experience. Dragbar B5000 includes a hygienic silicone cap to protect the device from infiltration of dust or foreign bodies.





► Zovoo Dragbar B5000; Battery and Led:
On the bottom there is the Type-C socket for fast charging which is protected by a transparent adhesive. There is also a LED light that will indicate when the device needs to be recharged or disposed of.





► Zovoo Dragbar B5000; 10 Flavors Available:
• Fruit Slushie
• Vanilla Cream Tobacco
• Mint Twists
• Peach Mango
• Watermelon Lychee
• Strawberry Icecream
• Blue Raz Ice
• Kiwi Passion Fruit Guava
• Pina Colada
• Aloe Grape



Zovoo sent me a total of 6 pieces for this test; 3 pieces of 50mg US / standard version which include the following flavors: Fruit Slushie, Watermelon Lychee and Blue Raz Ice. 3 pieces of 0mg ES version which include the following flavors: Peach Mango, Strawberry Icecream and Pina Colada.




► Zovoo Dragbar B5000; Vaping test & final conclusions:

• Fruit Slushie 50mg / ml:
Nothing says summer quite like a fresh exotic fruit to tickle your taste buds. It is a unique flavor fused with a refreshing thrill that makes it a perfect all day vape.

• Watermelon Lychee 50mg / ml:
It tastes refreshing and stunning. This exotic blend of freshness with a lingering floral scent and a tart, deliciously sweet fruit taste is all you need in a perfect vape juice.

• Blue Raz Ice 50mg / ml:
This flavor is a blast of Blue Raspberry. Slightly sweet, mellow, with light creamy nuances. A touch of light menthol completes this flavor to keep refreshing your senses all day.

• Peach Mango 0mg / ml:
Get ready to soothe your taste buds like no other fruity vape juice can, Zovoo has blended soft peaches and sun-kissed mangoes together to create this tropical extravaganza, with a very light icy twist!

• Strawberry Icecream 0mg / ml:
Classic flavor with a fresh and creamy touch. From your first puff, you will detect the sweet and juicy taste of the summer strawberry, further sweetened by the ice cream.

• Pina Colada 0mg / ml:
Remember those summer days where that refreshing cocktail is held, watching the sunset fade into the night. Refreshing, creamy and fruity!

-----------

* To choose the best e-juice I was spoiled for choice, they are all very good tastes all day long. The 50mg / ml aromas will take away the habit of smoking and you can alternate them with the 0mg / ml ones when you are more relaxed. With the upgraded mesh coil inside, DRAGBAR B5000 gives you fulfilling clouds and a fresh, steady flavor to pleasantly consume all 13ml of liquid contained within. I really liked the airflow which is calibrated for the best performance, I recommend you try this device, you will be satisfied.



• Zovoo has passed ISO 9001 quality management system certification and meets GMP820 qualification to ensure product safety and quality standard control. The products have been certified by UL, FCC, CE, KC, ROHS, TPD, PMTA, etc.


I would like to thank Fiona & Zovoo for providing me with these kits. I hope this review was useful for anyone looking to purchase the Zovoo Dragbar B5000.

Thanks for reading.

new to the site. just getting back into the hobbyist side of vaping after a 6 year absence. hello to all

Hello everyone. Yes I know you’ve been seeing a lot of me lately but it is for good reason. There have been a lot of new products released lately. Of course Innokin wasn’t going to be left out of the action. Innokin has sent me two samples and some spare coils and pods in order to provide you with a fair and honest review on the all new Innokin Sceptre II. The original Sceptre was released in 2020 and although it was a great device, there were some complaints on it as far as design was concerned but operation was good. I have to admit, I was one with a few suggestions for changes and it appears that once again Innokin has listened to the end users and reviewers and have made some really great updates like improving the airflow control, making the coils push to fit, and moving the fire button. Moving the fire button was the best change for me. Although the original Sceptre was auto and button activated, I could never get used to the fire button on the side of the mod. This new Sceptre is also a little smaller and more compact while maintaining the same 1400mah battery capacity. The pods are 3ml which is a little bigger than what seems to be the standard 2ml that I see on most pod devices.





WHAT’S IN THE BOX?

• SCEPTRE 2 POD KIT(.6 OHM)
• SPARE S COIL(.5 OHM)
• TYPE C USB CHARGING CABLE
• QUICK START GUIDE
• WARNING BOOKLET

SPECIFICATIONS:

FEATURES

• S COIL SERIES
• COMPACT SIZE
• IMPROVED AIRFLOW
• 1400MAH BATTERY
• PUSH TO FIT COIL

INITIAL THOUGHTS:

I have to congratulate Innokin for not only switching to but sticking with the fully recyclable packaging that they moved to some time ago showing that they are trying to do their part to preserve the environment. The packaging for the Sceptre II is very similar to prior samples I’ve seen from them. Innokin has always been good to send two sample kits and most times extra accessories. This time was no different. Not only did they send two kits but also extra pod kits and extra coils. By sending two kits that allows the reviewer to test both different coils at once and the extra accessories in a way are good insurance in case a kit happens to have a bad coil or something. I recently reviewed a kit and one of the coils was bad almost immediately after starting to use it so I was not able to do a proper review on that coil since no spares were sent by that company. My point is that Innokin is smart and generous when it comes to review samples.

The front of the box has a nice color picture of the device inside the package, a list of some features, and a very large warning. The back side of the box has a warning label, authenticity code, a list of the contents, and the company information of Innokin. Also there is another large warning.





Innokin uses a different style of box compared to most review samples I see. Many have an outer sleeve that slides off and a box top underneath that has to be lifted off. Innokin instead uses a box with a hinged flip open lid. Once opened the Sceptre II is visible with the pod and .6 ohm coil pre-installed. Underneath the cardboard tray is where you find the user manual, charging cable, spare .5 ohm coil (also in recyclable pouch), and warning booklet. I received the blue and rainforest versions for my review.



The Sceptre pod has been updated compared to the original version. The original version had a bottom airflow control where you had to remove the pod in order to change the airflow. I didn’t much care for that but once you got it set then you didn’t need to change it. The new Sceptre pod has a side airflow control that allows you to slide the control while the pod is installed in the Sceptre II.



The process of changing the coil has also been updated with the Sceptre II. The original Sceptre had a system where the coil base was incorporated into the base and you had to remove it before the coil could be unscrewed. The new one is a simple push to fit system. You still have a coil base that screws onto the coil but then you just push the coil into the pod. The bottom of the pod has four strong magnets that hold the pod in place securely. There is really no chance of it coming out accidentally. As a matter of fact it takes a little effort to remove the pod.

Like I have already shown in the above picture, the sliding airflow control is on one side of the pod. On the opposite side is the fill port covered with a rubber plug. The plug is fairly easy to lift up with a fingernail and can be rotated slightly to fill the pod. The pods are tinted some but it’s not too difficult to see the liquid while filling. There is an arrow stamped into the rubber plug that shows the user the direction to lift the plug for filling. It’s pretty mess free to fill but I always give it a quick wipe after closing the plug.









There are two coils included in the Sceptre II kit. There is the .5 ohm S Coil that you might be familiar with but there is also a new S coil in a .6 ohm resistance. The Sceptre II is also compatible with the .65 ohm and 1.2 ohm coils. The included .5 ohm coil is rated for 18-20 watts while the .6 ohm coil is rated for 11.5-16.5 watts.





The Sceptre II has a 1400mah battery capacity which is the same as the original one but Innokin has managed to reduce the size to make it more compact. The aesthetics of the new Sceptre are very pleasing in my opinion. The front has a silver diagonal stripe separating the solid body color which in this case is Rainforest. The color is only on the front. In the center of the silver stripe is my favorite upgrade on the Sceptre II. The fire button has been moved to the front where it was on the side on the original and I found it to be a little awkward.

The sides and back are just black. On the left side is the USB-C charging port. I have not yet seen a stated charging rate on the Sceptre II. The fill port on the pod is also on the left side but it is not accessible while the pod is installed in the mod. On the right side is where you have access to the sliding airflow control while the pod is installed.







The Sceptre II has two output levels which are indicated by LED lights on the front of the mod. There are two LED’s on the front. The one on the left of the fire button indicates the output level where blue = normal and purple = high. Simply press the fire button twice to switch between the output levels. The LED on the right side of the fire button indicates the battery level. These lights illuminate whether you press the fire button or use the auto draw function that works very well. The battery level indications are as follows.

• Green = >30%
• Orange = 10-30%
• Red = <10%

Also when charging the battery light will stay red until it reaches a 90% charge or higher.








FINAL THOUGHTS:

I have really enjoyed testing the Innokin Sceptre 2 kits that were sent to me for review. I ran the .6 ohm coil in the blue edition and the .5 ohm coil in the Rainforest version. I honestly didn’t notice a huge difference between them as far as flavor production. Both delivered good flavor and similar amounts of vapor. Both were run on the high (purple) setting. I ran the .5 coil with the airflow wide open and closed it maybe ¼ for the .6 ohm coil. With the airflow closed slightly I kept hearing a buzzing sound when taking a puff. It very much reminded me of running a different frequency on the Sensis kit which I also reviewed. With the airflow open, it is smooth and quiet. With it partially closed is the only time I hear the sound I described. The airflow was still smooth but it was a little noisy.

Innokin really took into consideration the thoughts of users when redesigning the Sceptre II. The upgraded airflow control is a welcome addition. I tend to like a loose MTL but for those who like a tighter draw then you can definitely get a tighter draw with this if you like. The smaller size to make it more compact is also a nice feature. However, my favorite upgrade is the fire button being moved from the side to the front. Now it’s very natural for me to use the fire button where it wasn’t on the original Sceptre. The push to fit redesign for coil changing is definitely a nice change. However, you will want to keep close watch on your thread on coil adapter when changing coils because you can’t use the device without it and there was not a spare included in the kit.

Overall the newly redesigned Sceptre II seems like a really great pod device. I would definitely recommend trying it if you are looking for a well built and good performing pod. With the two included coil options or the other two that are compatible, I would think you could find something to fit your vaping style. However with a maximum output of 20 watts, don’t expect it to be a cloud machine. That’s not what it was designed for anyway.

I’d like to thank Innokin and Nicole for sending the Innokin Sceptre II kits and accessories so that I could provide you with this review. Thanks also to the readers! You make this possible. Below is a link to the website so you can take a closer look for yourself.



Sceptre 2 - Product | INNOKIN®

I’m glad to be back again with another review for Dovpo. This time I will be taking a look at the new Dovpo Samdwich RDA. It is a single coil rda that has some really neat airflow options. There are four different airflow options as well as a top airflow. The Samdwich is pretty small as it has dimensions of 22mm x 31.9mm. There are also different outside caps available but not included. It also includes a squonk pin which is how I plan to run it for testing. Let’s go ahead and see what’s included and take a look at some promotional images. Then I’ll give my thoughts on this new rda.







WHAT’S IN THE BOX?

SPECIFICATIONS:

FEATURES:

• 22mm Diameter
• Drip/Squonk feeding method
• Stainless Steel construction
• Single coil configuration
• PEEK insulator
• 4 level airflow adjustment system
• 510 Delrin drip tip
• 510 Thread

INITIAL THOUGHTS:

The packaging for the Samdwich RDA is a bit different than what I’ve seen from other samples that I’ve received. It comes in a small box with a semitransparent cover over the top and the name Across with their mountain symbol in the upper right corner. The Samdwich name is in bigger type across the center. You lift that plastic cover to one side and the rda is visible with a box of accessories sitting beside it in a foam insert.

As always it’s a good idea to take any new tank apart as far as possible and give it a good cleaning. I had a little trouble getting the airflow control portion out of the main body of the rda initially. It was very tight. I ended up pushing the airflow control out as gently as possible from the inside using a small screwdriver. Once I had it out and cleaned then I put a little vg on it which made it move more smoothly and was now able to remove it without pushing from the inside.

The Samdwich does come with a tapered 510 drip tip but it was a little short for me so I went ahead and switched it out for a different tip after trying it for a while. As you can see in the picture below, the markings on the airflow adjustment show clearly which set of airflow holes are available to be used. The only branding is the Samdwich name you see on the picture. The outer chamber has two notches protruding so that the outer barrel of the rda locks securely into the base with no chance of turning the barrel without turning the base.

Below are a few close up pictures of the airflow adjustment portion removed so you can get a better idea of what the actual airflow holes look like. There aren’t any side airflow openings on the barrel so all airflow comes through the top. This is nice in my opinion as you don’t have to worry about any liquid spilling if you tip the rda too much. I have had that happen with other rdas that have side airflow openings.

I think I mentioned already that the Samdwich is a 22mm diameter rda. What this correlates to is that it’s not going to have a huge area to build on. It is a single coil rda. I initially tried one of the included 2.5 mm coils that were in the accessory bag and immediately installed the squonk pin. I had two different squonk mods I wanted to try it on. The first was of course was the Dovpo Pump Squonk mod. It performed pretty well on it but with the 2.5mm coil I kept thinking I could get better flavor. I ended up removing the 2.5mm coil and installed a 3mm Ni80 coil which measured in at .39 ohms on my other squonk mod since there’s no display on the Pump Squonk mod. To me this was a marked improvement in combination with a longer drip tip.

The first picture shows the bare deck which has two slotted head screws. On either side of each post screw is a shoulder so that the wire is easier to trap. In the second picture below it shows the 2.5mm coil installed. Once the legs are locked in and the screws are tightened down then it is easy to clip off the excess leg length. It’s really an easy deck to build on. Just not a lot of room. The third picture is of course the same coil wicked and wetted. Finally the fourth picture is the set up that I ended up with that included a longer drip tip and the Pump Squonk mod that I previously reviewed. The Pump Squonk mod has stayed in my rotation with an rda on it since I reviewed it. I really like it.

Below is a quick picture of the 3mm coil that I installed after trying one of the included coils. I felt like I got better performance with the larger coil. More vapor and flavor were produced with this one. Also in the picture below you can see the opening in the center of the deck where the liquid comes in when you have the squonk pin installed and are using a squonk mod.

FINAL THOUGHTS:

I really enjoyed testing the Dovpo Samdwich RDA. I have tested several rdas in the past and this is a pretty good one. It’s hard to compare this one to the others since most were dual coil rdas. This one is smaller also than any of the others I have tested with it being only 22mm in diameter. It’s actually nice to have a single coil rda for a change. It’s very easy and simple to build and use.

The four different airflow settings are a plus as well as it not having any side airflow holes with the stock cap so leaking is not an issue. However, there are optional top caps available and some of those do have side airflow openings.

I think that most rdas come with a squonk pin these days and am glad that it came with one also. That is my preferred method of use if I’m going to use an rda. It’s hard to believe that there was one rda from another company that came without a squonk pin and I saw several complaints about it on the forum. I don’t know what they were thinking. Don’t worry, as usual Dovpo has covered all the bases with the Samdwich.

I also like how the outer cap has two notches that stick out to lock into the cutouts in the base so there is no chance that the barrel will turn without the base. I’ve reviewed several different devices for Dovpo the last year or two and can’t think of one that I didn’t like. They seem to always have very good build quality in my opinion.

So obviously, yes I would recommend the Dovpo Samdwich RDA for you if you are looking for a solid rda that delivers good flavor and vapor production while using a single coil. I’d like to thank Dovpo and Dorothy for sending the Samdwich RDA for this review. Thanks go out to all the readers who make it to the end of my reviews. Below is a link to the website if you’d like to look at the Samdwich or any of the other tanks or mods that Dovpo has to offer.

The Samdwich RDA – DOVPO Official

$50.00 Next Day Shipping $5.00 (US Only)
Like New. Comes in original box with one pre installed coil and everything you see in the picture.

Mod Features:
AXON Chipset
Dimensions - 146mm by 54mm by 30mm
Dual High-Amp 18650 Batteries - Not Included
Wattage Output Range: 5-220W
Resistance Range: 0.03-5.0ohms
Zinc-Alloy Chassis Construction
Soft Touch Rubberized Coating
Power Mode
Pulse Mode
Intuitive Firing Button
OLED Display Screen
Two Adjustment Buttons
Short Circuit Protection
Burn Protection
No Load Protection
Overtime Protection
Low Resistance Protection
Low Power Protection
Overcharge Protection
ESD Circuit Protection
Pass Through Protection
MicroUSB Port

Vaporesso NRG-S 26mm Sub-Ohm Tank:
30mm Diameter - Widest Point
8mL Bubble Glass Capacity
5mL Replacement Glass Capacity
Pyrex Glass Reinforcement
Superior Stainless Steel Chassis Construction
Heating Insulation
Swivel Top Fill System - Single Fill Port
Dual Slotted Airflow Control Ring
Vaporesso NRG GT Coil Series
0.18ohm GT Meshed Coil - rated for 65-80W
0.15ohm GT4 Meshed Coil - rated for 60-70W
Threaded Coil Installation
510 Connection

Includes:
1 Vaporesso GEN 220W TC Box Mod
1 Vaporesso NRG-S Sub-Ohm Tank
1 0.15ohm GT4 Meshed Coil
1 5mL Replacement Glass
2 O-Ring
1 MicroUSB Cable
1 User Guide
1 Warranty Card