REVIEW: M702 SMART PCC from Absolutelyecigs.com (SMOORE)

[TaketheRedPill]

All's well Fedor

This may be slightly off topic but have you heard anything about some XL cart for the m40x/702 series? If you do have Smoore's ear, maybe you could tell them it's what their superfans want

If AEC had xl m40x carts or multi-colored carts for sale I'd be over there in a heartbeat!

Hey Birdy! I share your enthusiasm for the M401. the EVO cart has an insert that's twice the volume of the standard 401 insert. I saw doublecarts for the M401 on some chinese website recently but haven't seen them at a US vendor yet. I'm sure they're coming. In the meantime, if you can get hold of some Intellicig Evolution carts, they are the best bet for now and a straw mod works excellent in them, draining them dry.

Hope this helps!

TTRP

[Birdy]

Hey Birdy! I share your enthusiasm for the M401. the EVO cart has an insert that's twice the volume of the standard 401 insert. I saw doublecarts for the M401 on some chinese website recently but haven't seen them at a US vendor yet. I'm sure they're coming. In the meantime, if you can get hold of some Intellicig Evolution carts, they are the best bet for now and a straw mod works excellent in them, draining them dry.

Hope this helps!

TTRP

whaaa? I had no idea about the EVO carts being different. Looks like I'll be doing my ecopure order sooner than I need to so I can try them out. Thanks!

I just talked to Di at in the Eastmall forum and she says XL carts for the EM4 are coming soon- they'll be 40x compatible so there's that to look out for too.

bigger carts for this series = win.

[cracktheblack]

The XL carts are longer not wider, they will still fit the diameter of a 401 or 702 just fine.

[Scottbee]

But they probably wouldn't fit in the 702 PCC... right?

[Birdy]

But they probably wouldn't fit in the 702 PCC... right?

I believe they will. I was given this link in another thread.

EMPTY CORE XL Cartridge M401/2/3

It says in the description:

EMPTY CORE XL Cartridge For M401/2/3
The inside container is bigger, outside the size is the same

So it seems they'll fit fine. I can't wait to try them out.

[halonut]

Hello

I just got the M702 today and it worked great for 4 battery charges but now the PCC (which is fully charged) will not charge, or apparently even recognize the battery in the PCC! (whether the PCC is plugged in by USB or unplugged).

Now when the batt is screwed in and the button depressed the LED on the case flashes normally but the LED at the end of the batt does not flash & after the the case LED is done flashing it does not show either red or green to indicate battery condition. Worst of all the batt's (came with 2 of them) are not being charged at all.

I read about the soft & hard reset procedures and tried them but they aren't working. I do not believe that the contact in the PCC is making a proper connection to the batt's and the PCC doesn't even recognize that there is a batt in the charging slot.

I definitely could be wrong though, anybody have any ideas or sugg's before I send this thing back?

Thanks!

[katiemarie71730]

Hello

I just got the M702 today and it worked great for 4 battery charges but now the PCC (which is fully charged) will not charge, or apparently even recognize the battery in the PCC! (whether the PCC is plugged in by USB or unplugged).

Now when the batt is screwed in and the button depressed the LED on the case flashes normally but the LED at the end of the batt does not flash & after the the case LED is done flashing it does not show either red or green to indicate battery condition. Worst of all the batt's (came with 2 of them) are not being charged at all.

I read about the soft & hard reset procedures and tried them but they aren't working. I do not believe that the contact in the PCC is making a proper connection to the batt's and the PCC doesn't even recognize that there is a batt in the charging slot.

I definitely could be wrong though, anybody have any ideas or sugg's before I send this thing back?

Thanks!

I'm still charging mine just arrived today but from the few drags i got it was pretty good! Cut (20 ml Marlboro 36 mg) e-liquid into (40 ml Marlboro 18 mg).

I did read somewhere to clean the threads on the battery and atomizer itslef. Mine had little tiny black spots which were easily removed and charging now!

Hope you get your prob fixed! As for CS Absolutelyecigs is pretty good. They responded fast to my emails and shipped from China to South Arkansas USA in 10 days!

[katiemarie71730]

Update on my M702 I love the charging system for this thing you can go for almost a whole day without having to recharge the pack itself! Comparing that to my first e-cig the E-Health brad pack which plugged straight into the wall heh that thing was a joke! I'm not getting as much vapor as I should though but it has to be in my mixture. The batteries seem fine and the atomizers it's just not making a lot of vapor. I had purchased some mint cartridges Med strength for my EC 502 A which is E-Health cig. I thought the purchase was going to be a waste since the 502 atty burnt up but i discovered if you take a big safety pin you can push the clear tube out of the cart and then put in a M702 cart. You just have to be careful and leave the cartridge with the but end facing up unless you don't mind drinking mint flavor e-juice.

This is what i did with 20 ml of my 36 mg Marlboro Ex-High e-liquid.
1. Mixed USP humco PG glycerin with distilled water at a ratio of glycerin 6/water 1 or 6/1 ratio.
2. Mixed the solution 50/50 with the 20 ml of e-liquid and made 40 ml of 18 mg e-liquid.

Any suggestions or answers as to why this isn't producing a lot of vapor?

[Turbo]

Seems like a great package, congrats, as to little vapor, the atty prob has to break in.

[katiemarie71730]

My review of the M702 Smart PCC charging case and e-cig from absolutelyecigs.com : First off I have to say these guys are a little more undiscovered but they freakin ROCK! We know what honor means to the Chinese and especially a company like Smoore! Lol wonder if any of their employees needs a room mate? Well they use EMS shipping and sent my order from China to South Arkansas in 10 days! That's pretty dang good time!

Label Number: EE11 2077 659C N

Service Type: Express Mail PO-Add

Shipment Activity Location Date & Time
--------------------------------------------------------------------------------
Delivered EL DORADO AR 71730 11/18/09 1:14pm

Arrival at Post Office EL DORADO AR 71730 11/18/09 7:17am

Processed through Sort CAMDEN AR 71701 11/18/09 1:50am
Facility

Processed through Sort LITTLE ROCK AR 72231 11/17/09 9:00am
Facility

Inbound Out of Customs UNITED STATES 11/16/09 1:55pm

Inbound Into Customs UNITED STATES 11/15/09 8:08pm

Inbound International ISC SAN FRANCISCO (USPS) 11/15/09 8:07pm
Arrival

Foreign International CHINA PEOPLES REP 11/08/09 8:53pm
Dispatch

Foreign Acceptance 11/08/09 6:18pm

Origin Post is CHINA PEOPLES REP 11/08/09 5:11pm
Preparing Shipment

2nd I have to tell you about the M702 itself!
Once you charge the Smart PCC case and it has a full 5 bars with just one battery being used with it this thing can keep your battery charged for a few days! My PCC will have 3 bars after about 2-3 days of vaping and charging. The charging system rocks! With just 1 e-cig if you charge right after vaping next time you vape it will have a full charge. Now to adress something else. I have read on this forum that the M702 produce light to mild vapor. To that I have to say BULL SH**! Hun you all got your E-juice mixture wrong! I order their bulk E-juice 36 MG Marlboro flavor which is like 13 20 ml bottles! Think about this....The highest nicotine patch you can get is 21 MG! So cut that stuff!!! 18 is pretty close to 21 and cutting 13 bottles in half = 26 cartons worth of cigs for about $60.00 !!! I got enough e-cig juice/compared to normal smokes to last me for about 4 months! WOW!
OK so what's my magic recipe? Well first I bought some USP Grade Glycerin (Humco brand) from Wal-Mart like 117 ml for $2-$3 . I got my Distilled water from there too. I mixed the Glycerin/water at a 6:1 ratio that would be like for every 6 ml of PG glycerin, 1 ml of Distilled water. Ok next I mixed 20 ml of my 36 mg Marlboro Ex-High E-juice 50/50 with the solution of glycerin/water. This made 40 ml of 18 mg Marlboro flavor E-Juice. Next I bought some McCormick brand Mint Extract flavor from Wal-Mart. The ingredients are ALCOHOL (89&#37,WATER,OIL OF SPEARMINT, AND OIL OF PEPERMINT. Well I have heard that the oil of spearmint and pepermint are not water soluble but when mixed with alocohol they become soluble. Look at the ingredients again! 89% ALCOHOL! The high percent wont matter because it will be diluted some with the glycerin and distilled water. OK MOVING ON! I MADE A TEST BATCH OF 5 ml WITH 1 ml of McCormick Mint Extract flavor! How many of you have read things on the E-health brand rip off smokes that say 1 cart is = to 5 cigs? Well with this it seems to be ACTUALLY TRUE! I WAS AMAZED! The mint makes it smooth and VAPOR FROM HELL!!!! I thought I was smoking crack it put out so much vapor! OHHHHHHH AND IT SMOKED LIKE A REAL CIGGERETTE WITH THE THROAT HIT AND TONS MORE VAPOR!!!!
WHEN I SAY IT SMOKED LIKE A REAL CIG I MEAN YOU DIDN'T HAVE TO SUCK ON IT LIKE A FREAKIN MILK SHAKER OR POWER HITTING SOME POT! I SIMPLY SMOKE IT LIKE A NORMAL CIG WITH TONS OF VAPOR!!!!
M702 IS THE GOLD HERE FELLAS!!!!

The only problem I had with my order was one of the batteries died like in 3 days of receiving it. I contacted absolutelyEcig.com customer service and they replied within a few hours! The gave me 2 options of sending in my bad battery for repair or alternately they would send me a new battery with my next order when they recieved the defective one. In other words credit a battery to my account. WORKS FOR ME!

2 THUMBS UP FOR THE M702 from Absolutelyecig.com