How To Care for your SB!

[cddz]

Seems there has been a lot of atties that are not threading properly. The connectors I use are OEM and are very tight tolerance. I have talked to a lot of SB owners who have had thier SB for months now and they have also ran into this issue as well. I belive the hurried production before and after the Chineese holiday is the culprit. When you screw and unscrew the faulty atties you are recutting the threads on the atty. Do not force the faulty atty into the threads. Screwing them in and out a little at a time should do the trick. If you do use noalox to aide in this process be sure to clean it off very good with a q-tip. I am uncertain what the alcohol will do to the insulator, so use it sparingly. I have yet come accross any of these bad atties but i do have one comming to me this week. I suspect the thread pitch is off slightly. My advice is to use the atty that fits first and screw and unscrew it several times to give the connector some "slop"

[Vapoorer]

Seems there has been a lot of atties that are not threading properly. The connectors I use are OEM and are very tight tolerance. I have talked to a lot of SB owners who have had thier SB for months now and they have also ran into this issue as well. I belive the hurried production before and after the Chineese holiday is the culprit. When you screw and unscrew the faulty atties you are recutting the threads on the atty. Do not force the faulty atty into the threads. Screwing them in and out a little at a time should do the trick. If you do use noalox to aide in this process be sure to clean it off very good with a q-tip. I am uncertain what the alcohol will do to the insulator, so use it sparingly. I have yet come accross any of these bad atties but i do have one comming to me this week. I suspect the thread pitch is off slightly. My advice is to use the atty that fits first and screw and unscrew it several times to give the connector some "slop"

hey chad the attys i used were the Totally Wicked atty. also i hade a couple of joyes genuien to.to me i dont think the atty nore the device atty conector. but you know best it just need a little cleaning and lub and now it work perfect i think the thread were just a little dry.i also tryed an atty that i got 6 months ago but that one was dead but i just wanted to see if it screwed on but it was the same thing also i do not think i will have to apply the lub again i think it was just a 1 time thing because this morning i cleaned the atty connect with less then a pencil tip drop of alcohol on a q-tip and now its threading just like all my other devices and acutlly i feel like this connector in the Silver bullet is alot more smoother and alot more tighter in other word the atty dosnt move around.


As of using the alcohol it is not an everyday nore even every week its more like 2-3 months is when i use it to really clean it good but i dont use more then mabe a 1/4 of a drop and not even that. what i do tho 2 to 3 times a week is just take a Q-tip with nothing on it to the treads and thats it if you keep up on it then you wont have alot of build up and it wont be as difficult to clean

This is just what i did but you know best chad you might be right it might be the attys. but this worked for me so hopefully they fix the problem with the attys soon because iam sure this will be a big problem if they dont fix it

EDIT:
Now that i think of it more and more you are right it is the attys.because if you been using the same atty connector then its not the connector it indeed is the atty.WOW

[menthollight]

can i get the nolax from homedepot they are also brain dead there i went in there and no one new what the heck i was talking about so i left but now i know its in the electrical il ill go back if they have it

At my local Home Depot the Noalox was hanging at eye level along with a bunch of other Ideal brand electrical products like wire nuts. The small 1/2 ounce tube (in a blue and gray box about 4" tall) was around $2.79. They also had a much larger bottle for several dollars more, but the small tube should be enough to last for a long time.

[Vapoorer]

At my local Home Depot the Noalox was hanging at eye level along with a bunch of other Ideal brand electrical products like wire nuts. The small 1/2 ounce tube (in a blue and gray box about 4" tall) was around $2.79. They also had a much larger bottle for several dollars more, but the small tube should be enough to last for a long time.

hey thanks iam going right now that funny i was just about to close my computer i hope i make it they close at 10 i got 20 min luckly there only 5 min away hehe

[menthollight]

hey thanks iam going right now that funny i was just about to close my computer i hope i make it they close at 10 i got 20 min luckly there only 5 min away hehe

Wow, good timing! Hope you make it in time and can find it!

[Vapoorer]

I made it with time left over sweet works like charm i freken love this thin i cant seem to put the SB down

[Koman]

I made it with time left over sweet works like charm i freken love this thin i cant seem to put the SB down

Ha ha, you're not the only one man!

[Zapp and Roger]

Shine Upkeep:
I personally use Mothers Aluminum polish with cotton balls, this polish is available at most automotive stores. Follow the directions on the container, the more you do it the better you will get. Be sure to wear soft gloves, it will get annoying when you keep chasing those pesky smudges. It is also okay to use a buffing wheel. Use a loose sisal with green compound, if you do not know what that means, you should not be buffing your SB

Okay, I"m not sure what that last part means, so I really shouldn't be polishing the SB? It has become very dull and tarnished, and I would love to see the old shine back on it. Any recommendations? A beautiful piece that I just absolutely love, and would love to have shining again. Thanks!

[ohiomelody]

Okay, I"m not sure what that last part means, so I really shouldn't be polishing the SB? It has become very dull and tarnished, and I would love to see the old shine back on it. Any recommendations? A beautiful piece that I just absolutely love, and would love to have shining again. Thanks!

It means that you shouldnt use a buffing wheel if you don't know how. (I've tried and send SB's flying across the room ) However, it is perfectly fine to manually polish your sb. Mothers polish does an excellent job and you can find it at most automotive stores

[Zapp and Roger]

It means that you shouldnt use a buffing wheel if you don't know how. (I've tried and send SB's flying across the room ) However, it is perfectly fine to manually polish your sb. Mothers polish does an excellent job and you can find it at most automotive stores

Sounds great tyvm for the response ^.^