My fix for the Nemesis button. And how to shorten the throw.
Results 1 to 5 of 5
Like Tree5Likes
  • 4 Post By Three5Nines
  • 1 Post By azndrifter

Thread: My fix for the Nemesis button. And how to shorten the throw.

  1. #1
    Member Three5Nines's Avatar
    Join Date
    Nov 2013
    Location
    US
    Posts
    13

    Default My fix for the Nemesis button. And how to shorten the throw.



    You will need a mouth piece cover like what you get from the vapes shops to test their juices.



    Put the mouth piece on a 510 Dripping Atty, Carto, or on a gutted disposable like I 've done here.



    While applying downward force, roll the end on a smooth hard surface.



    We're rolling.



    We're rolling.



    And done.



    PERFECT!



    A normal Nemesis fire button. (Note the throw.)



    Take out the bottom pin/contact screw.



    Put the disk on the pin.



    Reassemble the button. (Note the throw.)
    The silicone disk acts and a spacer and a friction washer.
    The throw has been reduced to about half.
    You can finger tighten the pin, and it will not come lose.
    If you decide you want to go back you can. No permanent modifications to the Nemesis have been made.




    Forbear the utilization of voluminous expression when diminutive assertion will suffice.

  2. #2
    Full Member
    Join Date
    Jan 2014
    Location
    Jakarta
    Posts
    93

    Default

    Thank you,.I'll definitely try this

  3. #3
    Full Member
    Join Date
    Apr 2013
    Location
    New England
    Posts
    55

    Default

    Awesome. I have a magneto and the throw is ridiculous, its one of my two complaints. This looks like itll work on the magneto pin also and if it doesn't at least i can find a rubber piece that will fit it.

  4. #4
    Full Member
    Join Date
    Jul 2013
    Location
    Winnipeg, mb, can
    Posts
    34

    Default

    For me I just ended up using 3 magnets ever since I got rid of the spring my swich is so smooth if I'd like to adjust the switch i remove magnets or add more. 3 magnets I find is the best set up. But this is an innovative an inexpensive way to adjust the throw. good Job

    Sent from my SM-N900W8 using Tapatalk
    gpjoe likes this.

  5. #5
    Super Member Verified Member
    ECF Veteran
    gpjoe's Avatar
    Join Date
    Oct 2013
    Location
    SE Michigan
    Posts
    449

    Default

    Quote Originally Posted by azndrifter View Post
    For me I just ended up using 3 magnets ever since I got rid of the spring my swich is so smooth if I'd like to adjust the switch i remove magnets or add more. 3 magnets I find is the best set up. But this is an innovative an inexpensive way to adjust the throw. good Job

    Sent from my SM-N900W8 using Tapatalk
    Me too. I had to use three to keep it from firing with my heavier atomizers. The shortened throw was a bonus.

Tags for this Thread