Page 1 of 4 1234 LastLast
Results 1 to 10 of 40
Like Tree8Likes

Thread: iclear 30 and 16 leaks

  1. #1
    Full Member
    Join Date
    Mar 2013
    Location
    Jax, FL USA
    Posts
    93

    Default iclear 30 and 16 leaks

    I recently picked up 2 each iclear 16's and 30's.. I knew all the wick would really soaked up juice.. BUT they ALL leak like crazy out the bottom.. I have taken them apart and really made sure everything was tight and secure.. I get about 2 vapes and then they start leaking out the bottom.. I am very careful about putting in the juice, so nothing is going done the center tube..
    I also have pushed the slotted rubber tips down, and up.. when I take the tops off, they are all filled with juice.. I have tried only filling up to bottom wicks and still leaks everywhere..

    Anyone have this issue and able to fix? Really liked the amount of vape I get from them..

  2. Advertisement
  3. #2
    Ultra Member Verified Member jessermay's Avatar
    Join Date
    Apr 2013
    Location
    York, PA
    Posts
    1,394

    Default

    i have come across the same thing, I only have the iclear 16 but mine leaks also. Sorry, don't have a fix but if someone else does that would be awesome!
    mymares likes this.

  4. #3
    Full Member
    Join Date
    Mar 2013
    Location
    Jax, FL USA
    Posts
    93

    Default

    I want to try them on my new Zmax V3, but want to get the leaking issue fixed... my Zmax doesnt seem to like my protank! been trying to figure that out today.

  5. #4
    Full Member Supporting Member
    Join Date
    Jul 2013
    Location
    Ilinois
    Posts
    81

    Default

    i have 3 and brother has 3 of them and none leak. maybe we're just lucky?

  6. #5
    Full Member
    Join Date
    Mar 2013
    Location
    Jax, FL USA
    Posts
    93

    Default

    Luckier then me and jessermay! I tried another today and still leaks with new coil............ I have a leak problem with all my clearomizers the last few days............
    jessermay likes this.

  7. #6
    Detached Observer Team ECF (folding@home)
    Verified Member
    ECF Veteran
    State O' Flux's Avatar
    Join Date
    Jul 2013
    Location
    Nowhere
    Posts
    3,771
    Blog Entries
    8

    Default

    I use Innokin power supplies, but never have used their liquid products... what is the possibility that you've got a lower quality clone/copy? I took a quick look around and found a few sites that list the 30 with no reference to Innokin (and the usual generic "vivi nova" with no reference to Vision) what so ever. One uses Innokin in it's description, but not once does it indicate that they are selling you a genuine Innokin.
    After getting a copy Kanger T3S (and copy coil heads too) that, among other things, leaked like a sieve, I read the descriptions very carefully.

  8. #7
    Ultra Member Verified Member jessermay's Avatar
    Join Date
    Apr 2013
    Location
    York, PA
    Posts
    1,394

    Default

    I think that might be my problem, I think mine is a clone. i am going to look into getting another one or 2 and make sure its not a clone and try again

  9. #8
    Full Member
    Join Date
    Mar 2013
    Location
    Jax, FL USA
    Posts
    93

    Default

    The 16's and one 30 came with my itaste mvp's. which are Innokin... the other 30 the dealer also sells them alone and they say Innokin on the bottom connector. I had them for a couple months before I tried them out.. so, no returns.

    I have some knockoff Vivi's and they all leak too, sadly a Vision one too.. for some reason the leaky ones find me.. my 2 protanks are starting too! but the protanks I can fiddle with and get them to stop, sometimes just a different coil..

  10. #9
    Please support CASAA Verified Member
    ECF Veteran
    Supporting Member

    Join Date
    Jul 2009
    Location
    Midway,Ga.
    Posts
    447

    Default

    I have been using the iclear16's since they came out. Like six months or so. Also have about 20 of the 30's. I have never had a leak or ever had a coil burn out. I use them for about 2 weeks and but them away for cleaning later. I also stocked up on a coop and have about 30 new I16's and 50 replacement heads. I think they are the best I've found in 4 years of vaping.

  11. #10
    Full Member
    Join Date
    Mar 2013
    Location
    Jax, FL USA
    Posts
    93

    Default

    Jericoriver ~~ is there anything different that you are doing that I am not? Its wonderful that you have had no problem with them.. I loved the vape I got out of them... but leaks and burnt coils have been my big issue with them.. I rebuild my kanger coils, took an I clear apart and that had burnt out, still no ready to rebuild them yet.

    Now, coop? I have read some posts that folks have talked about co-ops? I have never been able to find any info on them..

    Thanks for input, nice to know that some folks are enjoying the iclears.

Page 1 of 4 1234 LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •