Smoktech TT (Terminator Tank) vaporizers - burning out a lot? Fiddly? Or just me?
These things, right here (this is not an indictment of the distributor; VapingCraze is fantastic. The question is about the Smok product itself):
5pc Box Smoktech Terminator Tank Replacement Atomizers
I've burned out two so far, and will probably lose a third soon. The second burned out after just one day of use.
Now I am using these things, as far as I can tell, just as I'm supposed to. I make sure the induction holes are clear, the wick has juice, and I'm not overdriving the coil (currently my eVic is telling me I'm putting 4 watts into it, 3.3v, resistance 2.7 Ω - very very low power). But over a remarkably and distressingly short amount of time I see my resistance go from 2.1 - 2.2 ohms up to 2.7, 3, or more - and then poof, I've burned out another coil. The coil I am using now started its life at 2.1Ω, just 6 hours ago, and now it's up to 2.7Ω. That is too far, too fast.
I don't go through any other attys this fast, even the generic replacement bottom-feeders you can get for Kangers.
The problem is that I really like the TT. It has fantastic vape at low power, a great smooth draw, and barely ever gurgles. I don't want to write it off, but replacing the attys is gonna get expensive at the rate of 3-5 per week.
So what am I doing wrong here? Is this a known flaw with the Smok Terminator atty? Or am I missing something profoundly obvious in the way I handle it?
Barring that, is there an equivalent atty that will give me the same kind of experience, but not fry like an earthworm in the Sahara after half a day?
Last edited by warrenao; 09-12-2013 at 06:50 AM.
Reason: punctuation and grammar fixes
Oh arglebargle. I figured it out eventually. I was loosening the 510 adaptor, believing this allowed juice into the atty. Well, it let in juice, all right, but not enough to keep the coil cool.
What I needed to do was loosen the upper threaded fitting, the cup that contains the coil and wick. That's all it needed. I'm probably a dimwit for not realizing it sooner. Now that I've worked that out, the amount of vapor I get on just 4w / 3v is astonishing.
I really like the TT cause it's so easy to rebuild and I've never burned out a coil on one because the first thing I do is pull the factory coil and wick out and replace it with my own, 4 turns of 32ga round kanthal over 2 strands of 3mm silica wick vapes like a freight train. For the bucks they are really hard to beat. I use mine mostly as drippers but have a couple set up in AGR cartomizer tanks where they work very well.
Tags for this Thread