+ Reply to Thread
Page 1 of 3 123 LastLast
Results 1 to 10 of 22
New M401 problems in Ecigarette Technical Issues; I received a new M401 (my first) yesterday, and it just finished its initial charge. I left it in for ...
  1. #1
    Senior Member ECF Veteran
    Join Date
    Dec 2008
    Location
    New York City, USA
    Posts
    283

    Default New M401 problems

    I received a new M401 (my first) yesterday, and it just finished its initial charge. I left it in for 12 hours.

    The thing doesn't seem to light consistently. When I drag, the light goes out quickly, after about 2-3 seconds. It doesn't blink, mind you, like it's supposed to do after 5 seconds. It just sort of fades out, and I can't get a decent hit off it.

    And I can't even get it to do that consistently. Sometimes it just doesn't work at all.

    I just started charging up the spare battery and am gonna see if the same things happens with that. Does anyone know what could be causing this? Is it a dud battery?

    PS. Even after 12 hours, the charger light stayed green the entire time and never turned red. This also happened with my pen-style RN4072 though on the initial charge, so I didn't think anything of it. Should I have left it charging til the light changed?

  2. Advertisement
  3. #2
    Forum Supplier ECF Veteran CaSHMeRe's Avatar
    Join Date
    Jun 2008
    Location
    Hendersonville, TN
    Posts
    7,609

    Default

    If its a standard M401, than if you hit the cutoff, you have to wait a good minute or two before you inhale again. The M401 battery won't flash like the RN4072 battery, the light will simply just go out. The M401 atomizer is awesome, the *waiting* period if you hit the cutoff in between puffs can get annoying. I kind of learned just to take shorter, more intense inhales, and it does pretty good.

    Don't pay attention to the charger. Make sure to charge it for a good 12 hours and you should be good to go!

    P.S. = My PM Mailbox gets really full, really fast, so bear with me if it takes me a few days to get to your PM :) Don't forget, you can always contact us at info@puresmoker.com :)

  4. #3
    Ultra Member Registered Reviewer/Blogger
    ECF Veteran
    igetcha's Avatar
    Join Date
    Nov 2008
    Location
    UK
    Posts
    1,696
    Blog Entries
    1

    Default

    Quote Originally Posted by equazcion View Post
    I received a new M401 (my first) yesterday, and it just finished its initial charge. I left it in for 12 hours.

    The thing doesn't seem to light consistently. When I drag, the light goes out quickly, after about 2-3 seconds. It doesn't blink, mind you, like it's supposed to do after 5 seconds. It just sort of fades out, and I can't get a decent hit off it.

    And I can't even get it to do that consistently. Sometimes it just doesn't work at all.

    I just started charging up the spare battery and am gonna see if the same things happens with that. Does anyone know what could be causing this? Is it a dud battery?

    PS. Even after 12 hours, the charger light stayed green the entire time and never turned red. This also happened with my pen-style RN4072 though on the initial charge, so I didn't think anything of it. Should I have left it charging til the light changed?
    without a doubt, this is because the atomiser is running a little dry. either add a drop of juice onto the metal wick part of the atomiser or if you are using carts then leave it for 30 mins standing up. (cart end up, battery end down)

    that always cures the problem when i use my 401

    igetcha69Films.com - Video production and photographic services for the electronic cigarette industry

  5. #4
    Senior Member ECF Veteran
    Join Date
    Dec 2008
    Location
    New York City, USA
    Posts
    283

    Default

    Quote Originally Posted by CaSHMeRe View Post
    If its a standard M401, than if you hit the cutoff, you have to wait a good minute or two before you inhale again. The M401 battery won't flash like the RN4072 battery, the light will simply just go out. The M401 atomizer is awesome, the *waiting* period if you hit the cutoff in between puffs can get annoying. I kind of learned just to take shorter, more intense inhales, and it does pretty good.

    Don't pay attention to the charger. Make sure to charge it for a good 12 hours and you should be good to go!
    Thanks ---

    That all makes sense with the way this thing is operating. When the light goes out I can't smoke for a couple minutes afterward. None of this is mentioned in the manual though -- it says if you inhale for 5 seconds the light will flash 5 times just like the RN4072, and there's no mention of any waiting period, that I can see.

    As for the atomizer, I don't think it's all that great. Not that much vapor or throat hit, maybe because I usually can't get the full 5 second draw -- like I said it's more like 2-3 seconds. I like your RN4072 much better so far, Steve... maybe there's just something wrong with my 401.

  6. #5
    Senior Member ECF Veteran SuperStack's Avatar
    Join Date
    Nov 2008
    Location
    Sudbury, Ontario, Canada
    Posts
    299

    Default

    Quote Originally Posted by CaSHMeRe View Post
    The M401 atomizer is awesome, the *waiting* period if you hit the cutoff in between puffs can get annoying.
    It's almost comical how the manufacturers seem to go out of their way to install annoying features in these things.

  7. #6
    Senior Member ECF Veteran
    Join Date
    Dec 2008
    Location
    New York City, USA
    Posts
    283

    Default

    Quote Originally Posted by igetcha View Post
    without a doubt, this is because the atomiser is running a little dry. either add a drop of juice onto the metal wick part of the atomiser or if you are using carts then leave it for 30 mins standing up. (cart end up, battery end down)

    that always cures the problem when i use my 401
    Hmm I didn't think the atomizer needed to be moist for it to light. I'll definitely give that a try igetcha, thanks

  8. #7
    Forum Supplier ECF Veteran CaSHMeRe's Avatar
    Join Date
    Jun 2008
    Location
    Hendersonville, TN
    Posts
    7,609

    Default

    the M401 and RN4072 are 2 separate animals. I actually really love my M401 ... The atomizer is the best part about it. I get a much better throat hit with it than I do the 4072. Keep at it. The first day I was completely dumbfounded and pissed off ... Gave it some time, got used to the shorter inhales, and finally got used to it. Give the atomizer a good chance to break in! O, and when you drip, don't actually drip. Put the nose tip of the bottle against the steel wool and let out about half a drip at a time. I find by doing this, I can get a good 2/3 fulls drips to absorb without dripping down the sides of the atomizer

    P.S. = My PM Mailbox gets really full, really fast, so bear with me if it takes me a few days to get to your PM :) Don't forget, you can always contact us at info@puresmoker.com :)

  9. #8
    Senior Member ECF Veteran
    Join Date
    Dec 2008
    Location
    New York City, USA
    Posts
    283

    Default

    Quote Originally Posted by CaSHMeRe View Post
    Give the atomizer a good chance to break in!
    If you say so. I'll try not to get discouraged too easily. Thanks for all the tips.

    By the way, if you like the 401 so much, you should offer those too

  10. #9
    Forum Supplier ECF Veteran CaSHMeRe's Avatar
    Join Date
    Jun 2008
    Location
    Hendersonville, TN
    Posts
    7,609

    Default

    Quote Originally Posted by equazcion View Post
    If you say so.
    I know soooo !!! lol

    Quote Originally Posted by equazcion View Post
    By the way, if you like the 401 so much, you should offer those too
    What's the M401?

    P.S. = My PM Mailbox gets really full, really fast, so bear with me if it takes me a few days to get to your PM :) Don't forget, you can always contact us at info@puresmoker.com :)

  11. #10
    Senior Member ECF Veteran
    Join Date
    Dec 2008
    Location
    New York City, USA
    Posts
    283

    Default

    Quote Originally Posted by CaSHMeRe View Post
    What's the M401?
    I'm sure the reason I don't get that is cause there's some backstory I'm missing due to being new here

+ Reply to Thread
Page 1 of 3 123 LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

SEO by vBSEO