Phoenix Rebuildable Atomizer

[Optimo]

Just wanted to type up a quick little review before I do an actual video review of the Phoenix RA.

I got this one from Eshots and this is my impressions:

It seemed very small and compact for a RA. I opened it up and it has a prebuilt coil ready to go which read 2.4 ohms. It also came with extra wicks and wire to build your own coils. You can use a single, dual or tripple coil setup with these! It has a nice deep well inside it so you can drip about 15-20 drops in it and vape for a pretty long time before having to redrip wich is a big plus.

I dripped 15 drops and waited 30 secs to make sure the wick was nice and wet then dripped a few more. I took a toke and wow the TH was killer along with pretty good vapor production and very clean flavor. After a few hours of vaping I noticed that it started to taste burnt so I looked at the coil and it already had quite a bit of buildup on it. The main reason for this was the factory pre-built coil was actually wound too tight around the wick wich wouldn't let it wick fast enough for my speed. So I made myself a new loosely wraped coil, took one of my tiny screw drivers and unscrewed the screws on the positive and negative posts, poped the old coil out easily and put my new coil in which was very easy to do considering how small everything is. Once I did this it was vaping like a champ and tasted so fresh so clean I fell in love with it.

The one I got has white plastic to hold the poles in place and the juice well is completely open with no shelf for liquid to go under unlike other versions I have seen that had black plastic around the posts and a shelf in the well. I think this one is a newer updated version. You have to make sure when you put your coil in that it's not touching the hard plastic around posts or it will burn the plastic but there's plenty of space so don't worry. Both posts are very sturdy and will not move around at all.

The air flow hole for the Phoenix RA is on the side of the shell casing in the middle which gives it a very nice TH. The further the air hole is from the coil the more TH you will get and less vapor. You can unscrew the shell just a tad to line the hole up with your coil for less TH and more vapor. You can also use o-rings to take it even higher.

It has a standard 510 connection but it's completely sealed so you can't use it with bottom feeders but it will never ever leak because there's no way for juice to escape through the bottom which is a big plus for me. The draw is pretty airy but not too airy, it's deff not stiff by any means. You can also thread the tubes from various eGo Vision rebuildables, Ce5/6+ and others alike that are 14mm (I think) onto the atomizer base to change up the look wich is a huge plus for many people. This opens up alot of customization options for the Phoenix RA.

Most of the Phoenix is made out of brushed stainless steel but the top cap is brass that's chrome plated. You can't really tell the difference between the chrome/stainless because thw whole atty has a stainless non-mirror finish. Where the top cap is chrome plated you might have to grind/sand/scrape off a little of the excess plating in order to fit some bigger style drip tips but I didn't have to do this as all my drip tips fit perfectly.

All in all this is a very nice affordable customizable small rebuildable atomizer that is perfect for somebody looking to own their first RA without spending a ton of cash or for somebody that's already advanced with RA's that's looking for something more smaller and sleeker with the ability to use any type of wick system (can use SS mesh wick also) along with dual and tripple coil setups.

These are now being sold at Vaporbitch.com and Libertyflights.com US and EU. You can also get them direct from Eshotsph.com. Here are some pictures and how-to guides that show and tell you all about the Phoenix RA: Eshots Personal Vaporizers and Premium Liquids

I will have a video review of this atomizer up very soon and I will show how to use single, dual and tripple coils along with alot of other helpfull info and overall opinions. If you haven't already please go to my YouTube channel here, subscribe and stay tuned!

Thanks for reading, vape on!

www.VapeNexus.com

[rondasherrill]

Based on your review, I ordered 2 of these. I do have to ask though... Any idea why it is $19.50 at vaporbitch.com, but 39.50 everywhere else?

[Optimo]

Based on your review, I ordered 2 of these. I do have to ask though... Any idea why it is $19.50 at vaporbitch.com, but 39.50 everywhere else?

I guess VaporBitch is trying to get more sales as it was $35 there a week ago.

Remember when you get it to make yourself a loosely wraped coil...it will vape and taste so much better than the factory tightly wraped coil!

[water4choc]

Yeah - I noticed the price difference too. I went ahead and ordered a couple from Vaporbitch - can't wait to give them a try. They also had precoiled wicks that I picked up along with some extra wire and wicks.

[Optimo]

Yeah - I noticed the price difference too. I went ahead and ordered a couple from Vaporbitch - can't wait to give them a try. They also had precoiled wicks that I picked up along with some extra wire and wicks.

Before you install the prewraped coils...take a needle or something similar and slide it under the coil and pull up a little and twist your fingers on the coil the opposite way it's wraped to loosen them up a bit...I'm telling ya it will make a world of difference between tightly wraped and loosely wraped. It will also last longer before getting alot of buildup on the coil because it wicks better.

[TBinAZ]

Excellent review. Thanks!

[mwa102464]

$15@ NHaler got 2 of them there from Drew, these work super and being able to wrap your own coil to your desired sweet spot is great, no need to buy regular 510 Atty's any longer with these,,, they can also be modded into Bottom feeders for the Reo's and bottom feeder mods which is also super, 4 wraps is my bliss 0.20 wire= Vape On = ---> http://shop.nhaler.com/The-Phoenix-S...omizer-440.htm

[rondasherrill]

$15@ NHaler got 2 of them there from Drew, these work super and being able to wrap your own coil to your desired sweet spot is great, no need to buy regular 510 Atty's any longer with these,,, they can also be modded into Bottom feeders for the Reo's and bottom feeder mods which is also super, 4 wraps is my bliss 0.20 wire= Vape On = ---> The Phoenix Rebuildable Atomizer

Okay... Please teach. How does this get modified to bottom feed?

[Optimo]

The ones at Nhaler are actually knockoffs made by a different company. You can tell the difference by looking at the top where the drip tip goes in at...the Eshot isn't tapered and the one from Nhaler is. They prob both perform the same...just pointing out that they are not the same RA made in the Philippines.

[Optimo]

Link to the video review I did: Phoenix Rebuildable Atomizer (RA) Review- YouTube