+ Reply to Thread
Results 1 to 8 of 8
2nd 510 USB PS Fail! in Ecigarette Technical Issues; Why is this happening to me? I've made my mistakes.. I just want to scream! ya I'm Emoin out because ...
  1. #1
    Full Member ECF Veteran
    Join Date
    Oct 2009
    Posts
    113

    Default 2nd 510 USB PS Fail!

    Why is this happening to me? I've made my mistakes.. I just want to scream!

    ya I'm Emoin out because this is the second Joye 510 USB PS that has failed me! The last one blew up..





    this new one just won't CHARGE the Annoying stupid battery! Why do They even have stupid batteries! Why can't they be more like the Vapor King PS's that connects directly to USB! No Useless Malfunctioning battery! God!

    I've tried Connecting directly to usb on my computer, still won't charge, Tried on my ipod wall adapter charger thinger, Nothing.. when my first one blew up I took out the battery then it started heating up and I smelled a burnt plastic. Peice of Garbage! This is the last straw for me! My Vapor King from Vapor4life should be here monday hopefully I can't wait!

    510s are complete garbage! The batteries last 20mins! Their USB PS's are cheap plastic peaces of CRAP! Not enough flavor comes out of the 510 attys just lots of useless vapor, Their attys overheat too easily, leaving you with nasty burnt taste! Liquids keep leaking out of the cart into my mouth no matter how lil i put juice in with the perfect PTB Mod. the PCC's and wall chargers are too finicky and don't charge the already malfunctioning battery properly! Ultra Fail! I wish I could get all the money I spent on 510 crap back!

    Expensive lesson learned: Don't buy a 510! (At the very least just buy 510 attys and a 901 battery adapter or something because the 510 Batterys & passthru's Suck ass!)

    It would be cheaper to go back to analogs then going through his, thank god my VK is coming.

    I believe the manufacturer of these crappy PS's is Janty if I remember the labeling on the chip inside of the case right. "Janty Kissbox"
    Last edited by NewJoizy; 11-01-2009 at 01:11 PM.

  2. Advertisement
  3. #2
    Moved On
    Join Date
    Aug 2009
    Location
    Michigan
    Posts
    1,130

    Default

    Could have been worse, it could have destroyed your CPUs USB port like some others have.

    The only good PT IMO is Pure Smokers'. All the others seem like cheap Chinese garbage.

  4. #3
    PV Master ECF Veteran tribalmasters's Avatar
    Join Date
    Jul 2008
    Location
    United Kingdom
    Posts
    3,750
    Blog Entries
    1

    Default

    I guess the quality of the passthroughs has gone waaay down since I purchased mine, it took lots of abuse and is attached to a Kensington USB battery all day in my pocket!! As for the PCC, I agree they are crap! They charge slowly and self discharge themselves, not very useful at all! 510 batteries (manual) last not so long but just long enough for vaping on planes for me other than that the 510 is not my everyday vape

    You can probably guess from my avatar what type of PV I vape all day




  5. #4
    Moved On
    Join Date
    Sep 2009
    Posts
    257

    Default

    Cut the whole battery thing out and splice the line back together. Give that a try, you have nothing to lose.

    Just make sure you do it correctly so it doesn't short and damage your computer power supply.

    Depending on your USB, it will up the power to 5volts, but your amps will be limited to what the USB puts out prob 500mA. That will lower the wattage that the atty is running at and take away the burnt flavor you are talking about.

    The 510 atty has a lower resitance than the 901/801. This allows more amps to flow, using more wattage and giving you more heat. This is the reason for the burnt flavor and the low batt life. Run at 500mA (from the USB no batt) this becomes the limiting factor, not the resitance of the atty, so therefor the 510 should vape like the 901/801.

  6. #5
    PV Master ECF Veteran tribalmasters's Avatar
    Join Date
    Jul 2008
    Location
    United Kingdom
    Posts
    3,750
    Blog Entries
    1

    Default

    Quote Originally Posted by props76 View Post
    Cut the whole battery thing out and splice the line back together. Give that a try, you have nothing to lose.

    Just make sure you do it correctly so it doesn't short and damage your computer power supply.

    Depending on your USB, it will up the power to 5volts, but your amps will be limited to what the USB puts out prob 500mA. That will lower the wattage that the atty is running at and take away the burnt flavor you are talking about.

    The 510 atty has a lower resitance than the 901/801. This allows more amps to flow, using more wattage and giving you more heat. This is the reason for the burnt flavor and the low batt life. Run at 500mA (from the USB no batt) this becomes the limiting factor, not the resitance of the atty, so therefor the 510 should vape like the 901/801.
    Thats a damn good idea! I will have to try that!!




  7. #6
    Full Member ECF Veteran
    Join Date
    Oct 2009
    Posts
    113

    Default

    Quote Originally Posted by props76 View Post
    Cut the whole battery thing out and splice the line back together. Give that a try, you have nothing to lose.

    Just make sure you do it correctly so it doesn't short and damage your computer power supply.

    Depending on your USB, it will up the power to 5volts, but your amps will be limited to what the USB puts out prob 500mA. That will lower the wattage that the atty is running at and take away the burnt flavor you are talking about.

    The 510 atty has a lower resitance than the 901/801. This allows more amps to flow, using more wattage and giving you more heat. This is the reason for the burnt flavor and the low batt life. Run at 500mA (from the USB no batt) this becomes the limiting factor, not the resitance of the atty, so therefor the 510 should vape like the 901/801.
    interesting, I used a ipod charger to connect the passthru I no longer connect it to my computer for fear that i might fry it. I donot have the tools to split and re solder wires unfortunately so Im stuck with two crappy batterys untill my vk arrives.

  8. #7
    Moved On
    Join Date
    Sep 2009
    Posts
    257

    Default

    Quote Originally Posted by NewJoizy View Post
    interesting, I used a ipod charger to connect the passthru I no longer connect it to my computer for fear that i might fry it. I donot have the tools to split and re solder wires unfortunately so Im stuck with two crappy batterys untill my vk arrives.
    Just bare the wires, separate them, and twist them together. Cover individually with electrical tape, or in a pinch masking tape or just about any tape. Make you you do not leave plugged in unattended.

    ****** DISCLAIMER ******** This is not good electrical practice to do it this way. Crimp or solder and heatshink is correct. This was intended as a post of what to do in a bind..

  9. #8
    Full Member ECF Veteran
    Join Date
    Oct 2009
    Posts
    113

    Default

    I still get that overheating atty with burnt taste with the portable batteries that last 20mins, so I dunno whats up with that.

+ Reply to Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

SEO by vBSEO