The PVMA no more worries for batt connectors!

[mnealtx]

On the basis that it's easy to swap atomizer types. You want throat hit? Plug in a 510. Flavor? 801.

Etc etc etc... It lets you use a single power source with whatever atomizer you like, instead of making a mod for each.

[Distorted.Clarity]

wow, just read all 27 posts.
might build one tomorrow.

[rekeybobby]

very nice....

[Scubabatdan]

Here is an additional trick you can do, I bought a 810 tap and rethreaded the male RCA connector (Picture 1)

Picture 2 shows the RCA adapter rethreaded before grinding the end flush.

I then ground down the end of the connector (Picture 3), this allows for an 801 to be screwed on to the connector or...

Pictue 4 shows the different connectors I can attach, such as an 801 to 901 adapter in picture 5.

Well thats it, these are mainly for passthrough use or a PV that does not need the switch in the RCA connector barrel.

Dan

[Persis]

Hi guys...

Sorry the off topic... but

what kind of flishlight is this, and where can I buy it ???

POWER.jpg

Thanks...

[Kobar]

I could totally use this. If you happen to have a "RCA Adaptors 4 Dummies" guide I could prob get er done.

[Kobar]

--------------------------------------------------------------------------------
drip juice into a glass bubble pipe and heat with a lighter \

I was wondering the same thing too...

[SeanO'Connell]

Latest PVMA Mod:
Used the RCA connector with a switch in it so I dont need to put one in the battery case, thanks for the idea nick76! Case connector in effect is always "hot", here it is:







Well works great and I can make the battery case faster since I dont have to put the switch in! woohooo

Dan

where did you get the case you are using in these images?

[bamsbbq]

where did you get the case you are using in these images?

http://www.e-cigarette-forum.com/for...step-step.html

[gormly]

Here is an additional trick you can do, I bought a 810 tap and rethreaded the male RCA connector (Picture 1)

Picture 2 shows the RCA adapter rethreaded before grinding the end flush.

I then ground down the end of the connector (Picture 3), this allows for an 801 to be screwed on to the connector or...

Pictue 4 shows the different connectors I can attach, such as an 801 to 901 adapter in picture 5.

Well thats it, these are mainly for passthrough use or a PV that does not need the switch in the RCA connector barrel.

Dan

THANK YOU DAN!

I made these today after visiting Radio Shack and completed a mod in record time









I am calling it "The Bunny"


It's powered by 3 1300mAh batteries fully rechargable via the RCA jacks.

More thanks goes to a few other guys in the other modding threads.
Now I can vape two different cartos without switching or anything.