The PVMA no more worries for batt connectors! - Page 4 - E-Cigarette Forum

Vapster · 07-11-2009, 03:35 AM

I have only gotten up the courage to get the courage to carry on the 901. I just left it in my back pack. I have to say they ware major airports.
I know the small airports look pretty hard for anything suspicious.

I still won't vape on it in my seat. I just take a few drags in the bathroom.

kinabaloo · 07-11-2009, 04:06 AM

Quote:

Originally Posted by Vapster

I have only gotten up the courage to get the courage to carry on the 901. I just left it in my back pack. I have to say they ware major airports.
I know the small airports look pretty hard for anything suspicious.

I still won't vape on it in my seat. I just take a few drags in the bathroom.

lol - wrong thread by any chance ?

jaybird · 07-11-2009, 04:11 AM

nice job, cant wait to try this out.

TnA · 07-11-2009, 02:57 PM

warp1900, this is another excellent example of "thinking outside the box"!! Great idea and I'm definitely interested in trying this out!!

I've got a ton of RCA connectors and cable laying around from my car audio days and was just thinking I needed to clean house and start throwing that kind of stuff away!

Thanks for your ingenuity and sharing of this idea.

warp1900 · 07-11-2009, 07:40 PM

Thanx TnA, yes, that is exactly my point...most of us have RCA cables and devices sitting around, it is a connector that has been around with us for so many years and yet we don't pay much attention to it anymore. I believe that this solution will help develop even further the options we have for powering our atomizers in so many different and much simpler ways.
To me the best is that i don't need to worry about finding a good (and expensive) power supply for my heavy vaping needs. I just build my own so easy now. My 5,000 mAh sits on my desk and i use it everyday and lasts me almost 3 days without having to charge it.
I can also switch in seconds to my little nicostick boxes or magnums depending on my mood or need. I can vape with a cable attached (from USB, power box, Power supply form the wall, or) or carry my choice of power in a little box (1 X 14500, 2 X 14500, 1 X 10440, 2 X 10440, 1 X 18500, 1 X 16340, 2 X 16340). And every one was built with a minimal investment for parts (an RCA jack or plug goes for around .30 to .40 cents)

Laredo7mm · 07-11-2009, 09:41 PM

Quote:

Originally Posted by warp1900

...My 5,000 mAh sits on my desk and i use it everyday and lasts me almost 3 days without having to charge it....

Wow, you must vape A LOT!

My 2000mah boosted to 4.5V lasts almost 5 days, and my 1200mah 7.4 regulated down to 5 lasts for about 3.5 days. Is that 5000mah LI-Poly, Li-Ion, or what?

kinabaloo · 07-11-2009, 10:27 PM

Quote:

Originally Posted by Laredo7mm

Wow, you must vape A LOT!

My 2000mah boosted to 4.5V lasts almost 5 days, and my 1200mah 7.4 regulated down to 5 lasts for about 3.5 days. Is that 5000mah LI-Poly, Li-Ion, or what?

I'm guessing that with a special adapter warp is running 3 attys simultaneously

Which is something I want to build, when I'm sure the batteries can handle the current; perhaps best for each to have their own.

I think adapter should be spelled adaptor, no? Allowing adaptations; an adapter is one one who adapts (i.e. a person as subject). So henceforth I shall adapt my spelling habit and adopt 'adaptor'; that makes me an adept adapter in adopting 'adaptor' I guess

warp1900 · 07-11-2009, 10:34 PM

Quote:

Originally Posted by Laredo7mm

Wow, you must vape A LOT!

My 2000mah boosted to 4.5V lasts almost 5 days, and my 1200mah 7.4 regulated down to 5 lasts for about 3.5 days. Is that 5000mah LI-Poly, Li-Ion, or what?

Yes Laredo i vape A LOT, anything in between 7 and 10 ml a day, my wife tells me i should probably go back to analogs, LOL (1.5 pack per day X 28 years).
It is 2 18650 Li-ions @ 2500 mAh each in series. That is the beauty of the RCA system, i don't have to deal with USB connectors anymore.

P.S. i have to add that i am vaping 0 nic juice, so that should explain the excess?

kinabaloo · 07-11-2009, 10:39 PM

Quote:

Originally Posted by warp1900

Yes Laredo i vape A LOT, anything in between 7 and 10 ml a day, my wife tells me i should probably go back to analogs, LOL (1.5 pack per day X 28 years).
It is 2 18650 Li-ions @ 2500 mAh each in series. That is the beauty of the RCA system, i don't have to deal with USB connectors anymore.

P.S. i have to add that i am vaping 0 nic juice, so that should explain the excess?

Two 3.7v 2500mAh batteries in series is equivalent to a 7.4v 2500mAh cell, not 5000mAh. Anyway, shows how good those 18650s are

warp1900 · 07-11-2009, 10:43 PM

Yes again kina, its very simple to use 2 attys at the same time, no modifications needed , just add a Y and you are ready to go!

07-11-2009, 03:35 AM	#31
Vapster Full Member Join Date: Jun 2009 Location: Bay Area Posts: 50	I have only gotten up the courage to get the courage to carry on the 901. I just left it in my back pack. I have to say they ware major airports. I know the small airports look pretty hard for anything suspicious. I still won't vape on it in my seat. I just take a few drags in the bathroom. __________________ My main vapes: DSE 901, DIY 901 USB pass through, DIY "Maddog Magnum"

07-11-2009, 04:11 AM	#33
jaybird USA Supplier Join Date: Apr 2009 Posts: 469	nice job, cant wait to try this out. __________________ www.greatlakesvapor.com

07-11-2009, 02:57 PM	#34
TnA USA Supplier Join Date: Apr 2009 Location: Fayetteville, NC Posts: 558	warp1900, this is another excellent example of "thinking outside the box"!! Great idea and I'm definitely interested in trying this out!! I've got a ton of RCA connectors and cable laying around from my car audio days and was just thinking I needed to clean house and start throwing that kind of stuff away! Thanks for your ingenuity and sharing of this idea. __________________ Come visit our store at: www.ncvape.com

07-11-2009, 07:40 PM	#35
warp1900 Super Member Join Date: Apr 2009 Location: TX Posts: 759 Tweet this post!	Thanx TnA, yes, that is exactly my point...most of us have RCA cables and devices sitting around, it is a connector that has been around with us for so many years and yet we don't pay much attention to it anymore. I believe that this solution will help develop even further the options we have for powering our atomizers in so many different and much simpler ways. To me the best is that i don't need to worry about finding a good (and expensive) power supply for my heavy vaping needs. I just build my own so easy now. My 5,000 mAh sits on my desk and i use it everyday and lasts me almost 3 days without having to charge it. I can also switch in seconds to my little nicostick boxes or magnums depending on my mood or need. I can vape with a cable attached (from USB, power box, Power supply form the wall, or) or carry my choice of power in a little box (1 X 14500, 2 X 14500, 1 X 10440, 2 X 10440, 1 X 18500, 1 X 16340, 2 X 16340). And every one was built with a minimal investment for parts (an RCA jack or plug goes for around .30 to .40 cents) Last edited by warp1900; 07-11-2009 at 11:08 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-11-2009, 10:43 PM	#40
warp1900 Super Member Join Date: Apr 2009 Location: TX Posts: 759 Tweet this post!	Yes again kina, its very simple to use 2 attys at the same time, no modifications needed , just add a Y and you are ready to go!