Wooden pipe MOD

**asdaq** · 01-22-2012, 09:43 PM

Juergen, great mini Genisis (lovely pipe too, I never had a real one) but I'm a bit confused:

The main tube for the genisis is 12/10 alu, with some 10mm rod press fit, yes? That is the yellow and orange in the pic above respectively?

Then the green is from the mouthpiece end and in this pic looks bigger:

What size is that tubing, 15/13 with a gap between the two? All sorts of inspiration here, sorry to pester

edit: I'm slow and oversizing LOL. Still curious about the mouthpiece tube size.

**derJuF** · 01-22-2012, 10:04 PM

The "green" Mouthpiece has 12mm dia inside.
The "yellow" Tube in the "green" Mouthpiece is 12/10mm Aluminium.
The Main Tube (Tank, uncoloured) is 10/8mm Aluminium ,
the plug on "Top" is 8mm solid aluminium.

perhaps you are missing an "extra" Tube around all? there is no... you may see the 12/10 as it

**asdaq** · 01-26-2012, 03:23 PM

Thank you much for the info. I'm curious about your 510 clearos, Does the 510 from a clearo have a thicker diameter (10mm) than a standard steel carto? I have these from before the days of clearos and they are more like 9.5mm and would not press in like you have, even with a short section of the steel , which ones are you using?

**asdaq** · 02-06-2012, 05:08 PM

derJuf, this is a great little atty, I liked it so much I made 3 in your honor-- thanks a million!

DZ · 02-06-2012, 05:47 PM

What did you use inside the pipe for the battery holder? looks like it is aluminium but is it from a different battery connector?

**derJuF** · 02-06-2012, 06:23 PM

@asdaq: Cool!

like them too

@xxDeeZeexx: there is a small magnet on the bottom of the plastik-tube for the [+], a little straightened out part from inside an old telescopic-Antenna for [-] at the inner top side of the tube.
The "alu-like" washer round the magnet is just a little piece adhesive foil ... only for design, no function