E-Cigarette Forum - Entries for April 20, 2014 - Blogs
View RSS Feed

Recent Blogs Posts

  1. Mundy's Magic Wires

    by , 04-20-2014 at 10:09 PM
    For the good folks who know me, I've recently procured a handdrill.

    You see, I've always been a huge skeptic of bold exaggerated claims, and twisted wires was one of those things. It simply did not make sense to me that twisting the wires could necessarily make such a huge difference in the vape experience.

    Needless to say, I've been proven wrong. Very, very wrong.

    In the past month, I've experimented with:
    1) double 32ga
    2) triple 32ga

    Updated 04-21-2014 at 11:53 PM by TheKiwi

  2. Using pt2 single coil head in a pt3

    by , 04-20-2014 at 07:14 PM
    Quote Originally Posted by Sthur View Post
    If you a fan like me of single coils, I have found a way to put pt2 single coil heads in a pt3 style tank.

    If you refer to my blog I posted a oring from Home Depot to replace the rubber grommets on the pt2 coils, if you take 2 of the orings plus the the grommet and place it on the coil it works great. No gurgle or leaks.


    Any question let me know.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	image.jpg 
Views:	79 
Size:	22.1 KB 
ID:	328108  
  3. The Appropriate Liquid for the Ex-Smoker (A New Version)

    by , 04-20-2014 at 02:11 AM
    Different cigarettes have different strengths. Different smokers smoke different number of the cigarettes a day. In order to choose the right liquid for you and use the right amount of it per day you should take into consideration both these factors.


    E-liquids are sold usually in the following strengths:

    ● 0 mg/ml
    ● 6 mg/ml
    ● 12 mg/ml
    ● 18 mg/ml
    ● 24 mg/ml
    ● 30 mg/ml

    Updated 09-02-2014 at 08:01 PM by cckk

  4. Curt's complex, mysterious protank 2 coil rebuild

    by , 04-20-2014 at 01:39 AM
    Quote Originally Posted by oldnic View Post
    Hi all

    Had my protanks for about a month and the original coils are getting a little funky and picky about voltage. While I have a pack of 2.5 ohm heads, I also have a box of pre wound wicks and wires I got from fast tech. I fugured these are pretty close to what the factory uses. I also wanted to stick to 1.8 ohms or there abouts because those work better if I need to use a basic battery while the twists are charging.
    So I entered the mysterious, complex, and esoteric world of