View RSS Feed

Recent Blogs Posts

  1. Fixing The MVP/VV3 Contact Issues - a guide

    by , 05-31-2014 at 10:37 PM
    The MVP and VV3 are widely considered some of the best values for a VV/VW mod in the current market. They do however have one glaring flaw with the 510/ego connection and contact with the pin inside the connection. This will result in the device reading strange resistances, or no resistance at all and failing to fire the topper. The ego threading also appears to be to deep so as to block off the air holes on some clearo's and is often the suspected culprit ...

    Updated 06-02-2014 at 03:44 PM by Capt.shay

    Categories
    Uncategorized
  2. Coil I've been rocking

    by , 05-31-2014 at 09:37 PM (Thoughts on the flavors I have)
    Not really a new build per-say, but something I've been using that I don't see anyone else doing. With 20pg/80vg I can chain vape on a genny, even as far as a puff every 5-10 seconds at that viscosity. Killer flavor, clouds of vapor, just a fantastic all day build...it does eat juice for breakfast though, so refilling does happen if you vape much.

    Click image for larger version. 

Name:	IMG_20140531_140128.jpg 
Views:	9 
Size:	14.3 KB 
ID:	341465

    Click image for larger version. 

Name:	IMG_20140531_140749.jpg 
Views:	6 
Size:	19.5 KB 
ID:	341466

    Click image for larger version. 

Name:	IMG_20140531_141115.jpg 
Views:	12 
Size:	21.7 KB 
ID:	341467

    Click image for larger version. 

Name:	IMG_20140531_150213.jpg 
Views:	10 
Size:	17.3 KB 
ID:	341468 ...
    Tags: genesis, rba, rda
    Categories
    Uncategorized
  3. Innokin iclear 30s

    by , 05-31-2014 at 09:07 PM
    Quote Originally Posted by Baditude View Post
    If you are using the 2.0 ohm coils, around 4 volts should be a good starting point.

    If you are using the 1.5 ohm coils, around 3.5 volts should be a good starting point.

    A simple rule of thumb is to take the ohm rating, add the number "2", and the sum will be the voltage to use.

    2 ohm + 2 = 4 volts.

    1.5 ohm + 2 = 3.5 volts.
    Categories
    Uncategorized
  4. Banana Nut Bread from Mt Baker Vapor

    by , 05-31-2014 at 06:50 PM
    #34
    Banana Nut Bread from Mt Baker Vapor


    a nice smooth, semi sweet vape with a medium plume. I get a very light hint of banana (needs more banana) and a strong nutty flavor. It's almost more like a mixed nut bread pudding flavor with an after vape lingering now and later banana flavor....that more artificial banana flavor....not a bad vape but not a good one...if the label didn't say it was banana nut bread, I don't think I'd have known what to exactly call this...I ...

    Updated 06-18-2014 at 10:33 PM by Shadav

    Categories
    The Good, The Bad and The WT_ Was That Juice , WT_
  5. My 1st Ecig Forum Blog & .... :)

    by , 05-31-2014 at 06:10 PM

    Hello and welcome to my blog.

    I'm fairly new to this 2nd generation e-cig scene.
    Got my 1st ecig on March 2, 2014, and immediately cut down on cigs.
    Yesterday at 4pm I realized I was not carrying a lighter in my pocket for the 1st time in decades. Used to always check for lighter !

    So , my doctor is happy and so am I. I prefer the ecig to 'real' cigs, and I only smoke 1 of them at night, a 1/3 of it, before bedtime as a nightcap.
    I get slightly
    ...
    Categories
    Uncategorized
Page 1 of 29 1234511 ... LastLast