Protank/EVOD head rebuild...I think I can only post 5 pics on one post, so this will be a few posts long. I should preface this by saying that my Protank is currently out of town with my other half, so no way to show it to you fired up...
Remove the small, clearish washer
Remove the metal post...the easiest way is to mount this on the Protank base, and wiggle the post back and forth, it is just a press fit.
Remove this wick...
Pull out the post...this shows it part way out already. Easiest for me with my thumbnail.
Remove the rubber insulator also. Use your thumbnail. Resist the urge to use needle nose pliers, it's quite easy to tear it. This shows all the pieces you have now.
Remove the small, clearish washer
Remove the metal post...the easiest way is to mount this on the Protank base, and wiggle the post back and forth, it is just a press fit.
Remove this wick...
Pull out the post...this shows it part way out already. Easiest for me with my thumbnail.
Remove the rubber insulator also. Use your thumbnail. Resist the urge to use needle nose pliers, it's quite easy to tear it. This shows all the pieces you have now.