Protank Cotton Rebuild, the way I do it

metalhed73;10574912 said:

Seen a lot of questions regarding rebuilding protank/evod/every clone that takes them heads. So i figured I would post up my process and what I have learned so far.

What you will need:
View attachment 279114

Disassemble the head:
View attachment 279115

Wrap the coil on the drill bit:
View attachment 279116

Put Coil in the head:
View attachment 279117

Insert rubber insulator and bottom pin, remember one wire out side the insulator and one through, then insert pin:
View attachment 279118

Click to expand...