When your BCC gurgles...

I love the T3S and MT3S tanks I have, but because they're BCCs, they do have issues sometimes -- such as gurgling.

I've had plenty of gurgling with mine, and learned to deal. It usually means:

a) liquid in the center tube -- swab out with pipe cleaner;

or

b) loose coil in the base -- tighten it;

or

c) rubber gasket on the base not laying flat -- if you can't get it to lay flat, you may need either a new gasket or -- what I did -- a new base; (a spare base is very useful for dry-burning/rebuilding)

or

d) thin juice running right thru the coil head -- new or bigger flavor wick;

or

e) over-saturated coil, causing the head to be flooded -- take the coil apart, remove the flavor wick, and SHAKE! (hard!) the coil down towards a sink, and drops will fly out; keep flinging/shaking till they stop flying. Put on a new flavor wick before reassembling - the old one is probably saturated too.

Hope that helps; the problem isn't really the T3S tanks, it's just the usual difficulty of liquids and gravity and an opening at the bottom. T3S tanks actually rock, the flavor/vapor they provide is so good, but hey, liquids and gravity are a tricky mix.
  • Like
Reactions: catilley1092

Comments

There are no comments to display.

Blog entry information

Author
AndriaD
Views
583
Last update

More entries in ECF Blogs

More entries from AndriaD