In order to get to the cozy, unofficial hybreed chatroom (you're more than welcome even if you don't use iHybrids, btw) you have to somehow connect to the IRC network ECNet, then join the channel #iHybrid.
Right now, the easiest way to get there is: http://vapenerd.com/irc.html
If you don't like that or it doesn't work for some reason, then another easy enough method that most users prefer is this:
1. Click Here to go to Mibbit
Updated 01-24-2013 at 02:03 PM by elfstone
WHAT YOU WILL NEED TO PURCHASE
2 Batteries, 1 Charger, and a USB/Wall Adaptor
Vision eGo Spinner or Joyetech eGo Twist variable voltage batteries.
A battery's expected time of use between charges is rated in "mAh". 100 mAh = 1 hour. A 650 mAh battery can be expected to work for 6.5 hours, a 1000 mAh battery expected to last 10 hours between charges. Thus the need for more than
Updated 04-28-2013 at 12:31 PM by Baditude
Best Way to Prefill a Cartomizer and Fill a Cartotank
Filling the Cartomizer:
This is the method that I have used successfully. To keep juice out of the center air hole when filling the carto I plug it with half of a wood tooth pick, as this video shows: How To Refill Blu or Luci Electronic Cigarette Cartridge - YouTube
Next, I hold the carto
Updated 05-19-2013 at 04:53 AM by Baditude
Originally Posted by eHuman
Because this information may not necessarily be found in one post, I took the time to do so in hopes that it will demystify the AGA-T and other RBAs. I will make this into a Blog also so you won't need to remember what thread you saw it, just remember who wrote it and check my blog. Happy Vaping.
Rolling a wick, wrapping a coil, and eliminating hot spots with extreme prejudice:
At first many people have understandable issues and varying levels of success or failure/frustration
Note: If at any point your resistance drops and does not allow your APV to fire due to low Ωs, move the coils up or down a little, concentrating on what looks like the tightest ones first and test fire to see if you have solved the problem. Sometimes merely spinning the wick a little in place takes care of it. Make sure you allow the wick to cool before grabbing it!
Note: (This can be performed earlier also )You may slide your wick out to test what your true coil Ω