E-Cigarette Forum - crxess - Blogs
View RSS Feed


  1. Building Kayfun Lite Nano - Cotton Nest PT3

    by , 03-29-2014 at 07:56 PM
    Next we Very Carefully install the Chimney tube. Avoid shifting the wick. A tiny bit of twist will not hurt, but you do not want to be poking around trying to reposition things.
    Take one last look and tighten the tuck if needed then install the tube.
    Click image for larger version. 

Name:	DSCN0373.jpg 
Views:	755 
Size:	22.0 KB 
ID:	320808
    Next we add the Nest
    Take your second piece of Cotton strip (Removing a tiny layer may be helpful) and roll in palms like the first.
    Shape this rolled piece around the inside of the chimney ...
  2. Building Kayfun Lite Nano - Cotton Nest PT2

    by , 03-29-2014 at 07:30 PM
    ......Unroll a cotton Ball and cut a length to the Base Diameter.
    Click image for larger version. 

Name:	DSCN0365.jpg 
Views:	214 
Size:	21.4 KB 
ID:	320793

    Cut this piece along the length into 3 strips. Only 2 will be used.(I set the larger<oops> cut aside)
    Click image for larger version. 

Name:	DSCN0366.jpg 
Views:	213 
Size:	20.4 KB 
ID:	320795
    Roll one piece in your palms to shape the wick. Working carefully, twist the cotton shaping one end into a point. Dampen the point to aid in threading into the coil.
    Feed Point through coil and with a continuous twisting motion ...
  3. Building Kayfun Lite Nano - Cotton Nest PT1

    by , 03-29-2014 at 07:10 PM
    Posting this in hopes of helping those new to Kayfun style Atomizers and Cotton wicking. For those already experienced this may be boring or different from your preferred builds.
    This is NOT a coil building tutorial. Each situation, personal preference, setup will dictate your preferred coil build Size, wire gauge, resistance.

    The Kayfun line, Russian Atomizers and Many similar clones have much to offer the Vaping enthusiast. These devices offer much in the way of build flexibility ...