Next we Very Carefully install the Chimney tube. Avoid shifting the wick. A tiny bit of twist will not hurt, but you do not want to be poking around trying to reposition things.
Take one last look and tighten the tuck if needed then install the tube.
View attachment 320808
Next we add the Nest
Take your second piece of Cotton strip (Removing a tiny layer may be helpful) and roll in palms like the first.
Shape this rolled piece around the inside of the chimney tube - like a ring and clip off excess length.
View attachment 320810
Next - Saturate cotton ring and wick well.(8-10 drops should do)
Gently press the saturated cotton ring down against the upper deck Post and Coiled wick.
Work to clear most of Chimney cap threading area.
View attachment 320814
A little more fun - add 3-4 more drops - Install Chimney cap - Verify Final Resistance(ohms)
View attachment 320815
Attach to your preferred mod/APV and Test(dripper style) 2-3 hits available.
View attachment 320816
If everything went according to plan it is time to assemble your Tank/Top cap/drip tip and Fill.
* Notes:
1) Never assume number of days a wick should last - learn instead, the number of tank fills. This is more consistent.
2) Always leave a bubble of Air when filling - this establishes negative pressure.
3) If fill flooding occurs - Remove drip tip, place napkin/tissue over cap opening, hole upside down, blow through side air hole to clear.
4) When wick needs replacing - Rinse wick under faucet and while twisting one end lightly pull from coil. Coil should out last many wicks. Dry Burn coil then re-wick.
Happy vaping!
Take one last look and tighten the tuck if needed then install the tube.
View attachment 320808
Next we add the Nest
Take your second piece of Cotton strip (Removing a tiny layer may be helpful) and roll in palms like the first.
Shape this rolled piece around the inside of the chimney tube - like a ring and clip off excess length.
View attachment 320810
Next - Saturate cotton ring and wick well.(8-10 drops should do)
Gently press the saturated cotton ring down against the upper deck Post and Coiled wick.
Work to clear most of Chimney cap threading area.
View attachment 320814
A little more fun - add 3-4 more drops - Install Chimney cap - Verify Final Resistance(ohms)
View attachment 320815
Attach to your preferred mod/APV and Test(dripper style) 2-3 hits available.
View attachment 320816
If everything went according to plan it is time to assemble your Tank/Top cap/drip tip and Fill.
* Notes:
1) Never assume number of days a wick should last - learn instead, the number of tank fills. This is more consistent.
2) Always leave a bubble of Air when filling - this establishes negative pressure.
3) If fill flooding occurs - Remove drip tip, place napkin/tissue over cap opening, hole upside down, blow through side air hole to clear.
4) When wick needs replacing - Rinse wick under faucet and while twisting one end lightly pull from coil. Coil should out last many wicks. Dry Burn coil then re-wick.
Happy vaping!