What you need to know as as far as supplies and safety for the first time juicer. - Blogs - E-Cigarette Forum
View RSS Feed

dannyv45

What you need to know as as far as supplies and safety for the first time juicer.

Rating: 4 votes, 4.25 average.
by , 10-06-2013 at 08:32 PM (4078 Views)
Supplies

What you need to know as a first time juicer.

This blog is based on my own experiences and is written as my own personal opinion and should be taken as that only. Please remember to follow and observe all safety precautions.

Many new users wind up in the pit falls of what do I purchase and what do I not purchase. Many over think and over complicate there purchase and wind up spending far more money then they need to.

The Kit:

Many people will by a kit thinking this will give me exactly what I need. I don't really like kits because you get a lot of what you need but also stuff you don't need and youíre stuck with what ever quality they decide to give you which is usually the cheapest. My though is get what you need and not what you donít need. It will usually be far cheaper and you get better quality.


Bottles:

If your going to steep your mix in hot water or in an Ultrasonic cleaner or intend to store your liquid supplies for a long period you will want to purchase glass bottles. Hard Plastic glass like bottles as they age may leach some of its polymer molecules into the mix which may be a health concern. Soft plastic squeeze bottles are not good choices for long term storage because they tend to leach oxygen through the bottle walls over a long period of time causing excess oxidation. Soft plastic squeeze bottles do not present a polymer leaching issue like the harder plastic bottles and are a better solution for short term storage.

To see more on steeping read my other blogs at:

http://www.e-cigarette-forum.com/forum/blogs/dannyv45/

Soft squeeze luer lock needle tip bottles are wonderful to store your finished juices in and make it so easy to fill cartoís.

Recommended bottle sizes.


10, 10ml bottles (for test samples)
5, 30ml bottles

Syringes and measuring devices:

Fluid measuring devices are critical for accurate reproduction of a mix. There is nothing worst then using drops or haphazardly measuring and coming up with a fantastic juice and not being able to reproduce it. Exact electronic pipettes or calculating a dropper bottle to count how many drops to a ml may work for some but this can be a hassle. This is why I suggest using syringes and Graduated Cylinders.

Recommended syringes and Graduated Cylinder

Quantity 3, 1ml luer loc syringes
Quantity 3, 3ml syringes
Quantity 3, 10ml syringes
Quantity 1, 50ml Graduated Cylinder


I personally use a 50ml cylinder for measuring out my 1oz mix bases and measuring large quantities of base fluids.

As for luer lock needles the larger the gauge the easier fluid will pass through it.

Large = 14 - 18 gauge used for PG, and Nic solution. For measuring thick fluid like VG use a syringe without a needle attached.
Medium = 20 Ė 22 Gauge For PG (to thin for VG)
Small = 24 Ė 26 gauge for measuring PG and alcohol based flavors and can give a consistent small drop.

Safety and safety gear:

This should be self explanatory but remember Nicotine solution is toxic in large mg amounts so all safety precautions should be observed. In smaller amounts such as 12mg, 18mg, 24mg itís not a serious issue just wash it off your skin right away. Larger quantities can be more serious especially if ingested.
I recommend viewing the following video and bookmark it for future reference. It explains safety in all aspects of DYI.

This is a must view video.

https://www.youtube.com/watch?v=sOBDm8tSUEU&app=desktop

Recommended safety gear:

Rubber or latex gloves
* Goggles
* aprin

* Optional

I recommend my freedom smokes to get mixing supplies as they have the best assortment and best quality that Iíve found.

http://www.myfreedomsmokes.com/

I also have bought bulk syringes and bottles from Ebay and Amazon at a substantial savings.

The Calculator

One of the most helpful tools you could own is a mixing calculator. You can calculate your NIC base, VG, PG content and flavor percentages. Save your favorite recipes and notes, calculate NIC combining ratios etc... All in one easy to use handy tool and best of all there free.

I give the highest recommendation to the E-Juice me up calculator.

http://ejuice.breaktru.com/

So there you have it. All you need now are your flavors, PG solution, VG solution and NIC solution and youíre on your way. All I can say here is spend cautiously until you get the hang of it. Don't go out and by 100 flavors all at once or large quantities of your base solutions. It gets expensive and causes overload as what to make first with so much to choose from. 3 - 5 flavors are plenty to start off with.

My other vaping blogs can be seen at:

http://www.e-cigarette-forum.com/forum/blogs/dannyv45/

Good luck and happy vaping

Updated 11-21-2014 at 05:17 PM by dannyv45

Categories
Uncategorized

Comments

  1. yosi's Avatar
    hi danny,

    i have learned a lot from you doing this diy ejuice stuff. just want you to know that i consider you as my leading guru in this area. further, you have save me from a few pitfalls along the way.

    thanks a lot!
  2. dannyv45's Avatar
    I appreciate that and glad I can help
  3. eLefAdEr's Avatar
    Subscribed for later. I'm right on the cusp of getting into DIY and now I know exactly what I'll need. Thanks!!
  4. Kropotkin's Avatar
    Thanks so much! Very helpful for the nervous novice.

    .