3mm cotton yarn, 4 strand, 1 strand=0.75mm
1mm cotton string, 4 strand, 1 strand=0.25mm
(of course doubling over the 1mm string would work too. I'd advise to untwist the braid first though)
Using 1 strand of each equals 2mm. when doubled over
the folded piece on kanthal(used for threading the wick into coil)
Do both coils, bottom first of course.
So far so good, seems better than new.
4 volts is a little harsh for me but starting at 3.3v
and working my way up is the way to do it anyways.
80pg/20vg juice filled to top of wicks.
Will edit with update if any tweaking is required.
CHEERS!
1mm cotton string, 4 strand, 1 strand=0.25mm
(of course doubling over the 1mm string would work too. I'd advise to untwist the braid first though)
Using 1 strand of each equals 2mm. when doubled over
the folded piece on kanthal(used for threading the wick into coil)
Do both coils, bottom first of course.
So far so good, seems better than new.
4 volts is a little harsh for me but starting at 3.3v
and working my way up is the way to do it anyways.
80pg/20vg juice filled to top of wicks.
Will edit with update if any tweaking is required.
CHEERS!