When i started into diy there was alot of info i had to consume before jumping into it. On the most part i did alittle reading but lets face it, some people 
myself included hate reading info, JMHO
For those of you who are having a bad time with diy, have patience. Everyone whos done diy has made a nasty/bad batch of mix before its expected, we know its part of the adventure of a diy'er jmho
Now have any of you thought about an ultrasonic cleaner, i have and done all thanks to 1 member on here before i jumped into diy
ThankYou very much ~ bobalex ~ i have never waited longer than 3 days to vape anything i made. Your insight helped me along my way. Of course i made mistakes along the way but thats part of the diy experience. i am what you would call a vapor enthusiast. I cant wait for a new flavor or making a new batch of flavors, like i said before "im like a kid in a candy store, i dont know which way to run 1st". I have bought so many flavors i fear they may go bad before i use them lol if that makes any sense. So i share my experiences with people i connected with here, some say what i made was crap and some say it was good. That only helps me want to make better ejuices.
Think about it before jumping head 1st into something, know what you will need before.
so lets see,
Flasks / Cylinders / Syringes / Bottles - for eliquid / Flavors / PG & VG / Nicotine
Also i go to the dollar store, they have small containers that you could use to make different % batches, Amazon has avery labels they are great for beginners.
Point is even the best diy'er runs into speedbumps every now and then, try to stay postive and remember to have fun when your making something, if theres no fun you will not be happy if you stumble. I have been fortunate to have people i can connect with and share a laugh/rant but mostly laughs with lol. In the end try to make it enjoyable
this is just my opinion & on what i think and i hope it helps anyone who stumbles along there way into diy'ing. Thankyou
**NEW STEEPING METHODS I HAVE USED**
ok im very lazy at steeping so this is what i did over the last nearly 2 years of steeping methods.
-- First steeping method was hot water bath until it came down to room temp then shake and put up
-- Second steeping method was uncooked rice in a bowl microwave for 10-25 seconds depending on if the uncooked rice was hot or not, leave in bowl until room temp, shake and put up
-- Third steeping method Ultrasonic cleaner i got the one 30min cleaner did a few 30 min cycles shake then put up
-- Fourth steeping method was a mini paint shaker did it for 15 minutes then put up
-- Fifth steeping method is my last method is a 4 channel speed control magnetic stirrers. doing this method for an hour or 2 speeds up steeping by a few days to a week
***Also some flavors like blueberry and tobaccos naturally need time to mature so some flavors theres no way around, u just have to steep them.
also uncapping for 24-48hrs do help with eliminating the mediciney or perfumey smells
myself included hate reading info, JMHO For those of you who are having a bad time with diy, have patience. Everyone whos done diy has made a nasty/bad batch of mix before its expected, we know its part of the adventure of a diy'er jmho
Now have any of you thought about an ultrasonic cleaner, i have and done all thanks to 1 member on here before i jumped into diy
ThankYou very much ~ bobalex ~ i have never waited longer than 3 days to vape anything i made. Your insight helped me along my way. Of course i made mistakes along the way but thats part of the diy experience. i am what you would call a vapor enthusiast. I cant wait for a new flavor or making a new batch of flavors, like i said before "im like a kid in a candy store, i dont know which way to run 1st". I have bought so many flavors i fear they may go bad before i use them lol if that makes any sense. So i share my experiences with people i connected with here, some say what i made was crap and some say it was good. That only helps me want to make better ejuices.
Think about it before jumping head 1st into something, know what you will need before
. so lets see,
Flasks / Cylinders / Syringes / Bottles - for eliquid / Flavors / PG & VG / Nicotine
Also i go to the dollar store, they have small containers that you could use to make different % batches, Amazon has avery labels they are great for beginners.
Point is even the best diy'er runs into speedbumps every now and then, try to stay postive and remember to have fun when your making something, if theres no fun you will not be happy if you stumble. I have been fortunate to have people i can connect with and share a laugh/rant but mostly laughs with lol. In the end try to make it enjoyable
this is just my opinion & on what i think and i hope it helps anyone who stumbles along there way into diy'ing. Thankyou**NEW STEEPING METHODS I HAVE USED**
ok im very lazy at steeping so this is what i did over the last nearly 2 years of steeping methods.
-- First steeping method was hot water bath until it came down to room temp then shake and put up
-- Second steeping method was uncooked rice in a bowl microwave for 10-25 seconds depending on if the uncooked rice was hot or not, leave in bowl until room temp, shake and put up
-- Third steeping method Ultrasonic cleaner i got the one 30min cleaner did a few 30 min cycles shake then put up
-- Fourth steeping method was a mini paint shaker did it for 15 minutes then put up
-- Fifth steeping method is my last method is a 4 channel speed control magnetic stirrers. doing this method for an hour or 2 speeds up steeping by a few days to a week
***Also some flavors like blueberry and tobaccos naturally need time to mature so some flavors theres no way around, u just have to steep them.
also uncapping for 24-48hrs do help with eliminating the mediciney or perfumey smells
