NOTES :This is the quick translation of my french review of a prototype mod based on a bulli extreme 901dse. It is mainly a photo review. The photos talk by themselves.
If you have any question about it don't hesitate to ask me questions.
The innovation is the "adaptable piece" on it, wich can be used as a standard mod in 901 but easily as a VR4 mod also (based on G120 cigars carto, this VR4 mod can also use the A1 aty )
Joel
If you have any question about it don't hesitate to ask me questions.
The innovation is the "adaptable piece" on it, wich can be used as a standard mod in 901 but easily as a VR4 mod also (based on G120 cigars carto, this VR4 mod can also use the A1 aty )
Joel
< The Bulli Extreme " TRANSFORMER" >
This is a little photo review about the
Bulli "Transformer"
or, How to transform a standard bulli (all aty)
into a VR4 Bulli (and allow to use A1 Aty or not.)
( Mystery compared to Transformer - & Ato 901dse with D-trip metal )
The Bulli "Transformer" is a Prototype. As you can see on the photo he is taller than the "Mystery" about 0,5cm.
( "Transformer" alone with Ato 901dse + D-Trip metal )
The "Transformer is a huge mod. But it remains very light because of is all alu hand made.
And he is very usefull because he can be use as two single differents mods. First in standard in 901dse (all other aty are possible); but also you can bring in your pocket a Nubsi VR4 (based on G120 carto cigars).
( "Transformer" in 901 dse standard + complete "Adaptable Piece" with Nubsi VR4)
The principle of the “Transformer” holds in an essential piece: "L'ADAPTABLE PIECE" wich allow to make the transition between the standard mod and the VR4 one. So we can easily also use it with Aty A1 with filament replacement.
( Close-Up : Bulli extreme 901dse, "Adaptable Piece" with VR4, Ato 901dse+D-Trip metal )
As we can see on the close-up, the system is simple: The "Adaptable Piece" is encapsulated in the Bulli extreme standard. After, we've just have to fix it on the screw.
( Close-Up : The bottom of the Bulli 901dse, "Adaptable Piece", Nubsi VR4 )
When the "Adaptable Piece" is fixed to the Bulli Standard, now we have to clips the Nubsi on it with his VR4 system (Carto G120) wich integrates or not the A1 Aty.
This is a little photo review about the
Bulli "Transformer"
or, How to transform a standard bulli (all aty)
into a VR4 Bulli (and allow to use A1 Aty or not.)
( Mystery compared to Transformer - & Ato 901dse with D-trip metal )
The Bulli "Transformer" is a Prototype. As you can see on the photo he is taller than the "Mystery" about 0,5cm.
( "Transformer" alone with Ato 901dse + D-Trip metal )
The "Transformer is a huge mod. But it remains very light because of is all alu hand made.
And he is very usefull because he can be use as two single differents mods. First in standard in 901dse (all other aty are possible); but also you can bring in your pocket a Nubsi VR4 (based on G120 carto cigars).
( "Transformer" in 901 dse standard + complete "Adaptable Piece" with Nubsi VR4)
The principle of the “Transformer” holds in an essential piece: "L'ADAPTABLE PIECE" wich allow to make the transition between the standard mod and the VR4 one. So we can easily also use it with Aty A1 with filament replacement.
( Close-Up : Bulli extreme 901dse, "Adaptable Piece" with VR4, Ato 901dse+D-Trip metal )
As we can see on the close-up, the system is simple: The "Adaptable Piece" is encapsulated in the Bulli extreme standard. After, we've just have to fix it on the screw.
( Close-Up : The bottom of the Bulli 901dse, "Adaptable Piece", Nubsi VR4 )
When the "Adaptable Piece" is fixed to the Bulli Standard, now we have to clips the Nubsi on it with his VR4 system (Carto G120) wich integrates or not the A1 Aty.
