Entries with no category
So I'm sitting here trying to decide on a bottom-fed RTA to buy. I'm kinda stuck. It seems like everything has one of a couple problems...
Tight DrawPain to BuildPain to Fill
I've been looking at a ton of reviews for the Kayfun, Aqua, and Lemo... and their problems go in about that order, with Kayfun both having the downside of tighter draw and being a pain to fill (cus leaking).
I like nearly everything I read about the Lemo, but it requires a syringe
Updated 09-23-2014 at 10:30 PM by Quin
So, today, against my better judgment I did two things:
I rebuilt my first coils on the Igo-W, with dual coils and organic cotton (came out to 2.2ohms with a 9/10 wrap of 32ga kanthal). The reason I say this was against my better judgment was because I was saying I wasn't going to do this till I got another hole punched in it... but it works great. It took some finagling with the coils to get the hot spot out on one of the coils, but now it's vaping like a champ.
The second is
Updated 09-12-2014 at 03:45 AM by Quin
So I got an Igo-W in the mail a couple days ago, and like everyone else, felt the airhole was WAY too small.
Took a 1/16 drill bit to drill it out and it took pretty much forever (I actually took a break at about the end of it for a couple hours because my hands were getting pretty sore just pressing the damned button and the battery was getting low on the drill).
I know there's better types of drill bits for drilling out holes on tanks, but that was what we had in the
Just got my MVP and IGO-W in the mail yesterday. I unboxed them both late last night and turned the MVP on just to check it out.
I actually am vaping off both right now. Woke up and put one of the coils that comes with the IGO-W on it (this was an interesting experience... so glad that it came with two coils cus otherwise I wouldn't be able to try it out just yet. I just put one on).... kinda laughing because the photo on the website did not show a drip tip, so I bought an extra. Now
Updated 08-26-2014 at 10:29 PM by Quin
I'm all saying how I probably won't get a big mod like a Provari or something...
and now here I am looking at the iTaste MVP and Vamo.
I decided that I want to try rebuilding coils. It doesn't seem too difficult, but there is obviously a risk... and I need something to check the ohms (and for shorts).
So, apparently I can do this with a battery that has an ohm reader and short protection. That leaves a decent amount of options. So, basically, right now... I'm searching