OK UPDATE: New Method that seems to work (for me that is) this is a built from my original mentioned method and the reevaluation of the "wetburn"
1. take the
tank out of the ego-T atty
2. drip 7-8 drops of straight PG
3. activate the ego battery and after a second or two tilt the
device upside down and shake over something to catch the drips (still holding button till cut off or louder sizzle is heard)
4. if louder sizzle isn't heard reactivate the button.. NOTE you have to beable to know the difference between a flooded atty activated and a dry atty being activated sounds as not to reach a dry burn state.
5. repeat steps 1-4 one more time if your atty is real gunked up.
6. take atty off of
device and blow from connector end out.
disclaimer: this may be not be advisable for the first time user, for one needs to know how an atty works at different stages of it's life. This also might not be everyones preferred method. Performed at user's risk
LGD