View RSS Feed

All Blog Entries

  1. Building Kayfun Lite Nano - Cotton Nest PT3

    by , 03-29-2014 at 07:56 PM
    Next we Very Carefully install the Chimney tube. Avoid shifting the wick. A tiny bit of twist will not hurt, but you do not want to be poking around trying to reposition things.
    Take one last look and tighten the tuck if needed then install the tube.
    Click image for larger version. 

Name:	DSCN0373.jpg 
Views:	270 
Size:	22.0 KB 
ID:	320808
    Next we add the Nest
    Take your second piece of Cotton strip (Removing a tiny layer may be helpful) and roll in palms like the first.
    Shape this rolled piece around the inside of the chimney ...
  2. Building Kayfun Lite Nano - Cotton Nest PT2

    by , 03-29-2014 at 07:30 PM
    ......Unroll a cotton Ball and cut a length to the Base Diameter.
    Click image for larger version. 

Name:	DSCN0365.jpg 
Views:	96 
Size:	21.4 KB 
ID:	320793

    Cut this piece along the length into 3 strips. Only 2 will be used.(I set the larger<oops> cut aside)
    Click image for larger version. 

Name:	DSCN0366.jpg 
Views:	88 
Size:	20.4 KB 
ID:	320795
    Roll one piece in your palms to shape the wick. Working carefully, twist the cotton shaping one end into a point. Dampen the point to aid in threading into the coil.
    Feed Point through coil and with a continuous twisting motion ...
  3. Building Kayfun Lite Nano - Cotton Nest PT1

    by , 03-29-2014 at 07:10 PM
    Posting this in hopes of helping those new to Kayfun style Atomizers and Cotton wicking. For those already experienced this may be boring or different from your preferred builds.
    This is NOT a coil building tutorial. Each situation, personal preference, setup will dictate your preferred coil build Size, wire gauge, resistance.

    The Kayfun line, Russian Atomizers and Many similar clones have much to offer the Vaping enthusiast. These devices offer much in the way of build flexibility ...
  4. TUTORIAL: heat coloring your mod

    by , 03-28-2014 at 09:24 PM
    Made a thread but figured I would make it into a blog also. I wanted to modify my cool (but average) mixed nemesis clone, I had seen pictures of custom mods that had their colors changed by using heat.
    I searched and searched and couldnt find anything really explaining how to do it or showing how to do it. I saw people talking about sticking it in the oven at 550 degrees but not really getting much color change. I figured i could use a propane torch to achieve some good color, so this morning ...
  5. One Stop Reference Shop For New and Experienced Vapers

    by , 03-28-2014 at 04:21 PM
    Quote Originally Posted by Keeferes View Post
    As a new Vaper myself, I spent hours upon hours searching for this information. Many questions were asked and many links were given to me. Those links, and question answers are all here. This is a list for basic direction, but does include some liquid discussion, supplier discussion, etc. This is designed for the basic over and over again questions with the same links usually provided, but just put in one place easy to find. I tried as hard as I could to credit the author of each link. None of this