Originally Posted by Jim66
I really like the iClear 30, but I personally don't like the knucklehead drip tip that comes on it. I wanted a standard drip tip instead.
I found the CE4 drip tips have the exact same threads and diameter, but the length of the bottom tube of the tip is longer on the CE4 tip.
Take a look at this picture. You can see the iClear 30 tip and below it is a CE4 tip that I have already cut down. Below that are three more CE4 tips that have not been cut yet including a standard
Originally Posted by Radar2013
I was sitting in my garage yesterday bored out of my mind. I then got to looking at all of the wood that I had just sitting around. Then an idea hit me. The more I thought about it the more the design I had began to improve. I then began building and came up with this. A Vapor Docking station. I drilled two holes at the top for a battery with a Vapor Tube connected and for a battery charging. In the bock I put a hole for the charging cord to go into the docking station. Inside are 3 compartments.
Originally Posted by roffles18963
I'm just gonna assume the manual was for firmware 1.0, when I got mine it came with 1.2 and looked NOTHING like what was in the manual. Which isn't really a big deal. I don't really plug my eVic in to use MVR, I use an external charger and cycle 4 different batteries through it.
You can change the display on the upper left side of the screen by HOLDING the ring to the left, it'll switch between clock, current puffs/puffs remaining, and wattage/ohms (if using VV mode) or voltage/ohms
Bought at Thanks For Vaping vaper's lounge in San Antonio, TX, this juice is awesome. I can't quite even describe the flavor, but it's definitely a good juice. Thanks For Vaping is an excellent vaper's lounge as well, and has a website with shipping. +1 for the juice and the vendor.
Interesting topic right now about nicotine extraction or not.
plus other interesting topics too I'm sure