[QUOTE=kushka;10384083]I need some basic advice on clearomizers -
I have issues with my ce4s leaking onto the battery all the time. Any advice out there?
I was part of a group buy of ce2s when they came out back in November 2010 and my experience with those left me so traumatized that I swore off top coil vaping forever. Thus I have not followed any threads where they have been mentioned or learned anything about them.
But, I read that a B&M vaping store had
So I have been vaping now for 14-ish months and the whole thing started the day I heard I was going to be a daddy now I have a 5 month old daughter and I have been coffin nail free since the moment I heard the news of the expecting so now that's a brief 14 month back story lets get into the current time frame
So I started with 2 full ego c-twists with vivi Nova 2.0 dual chamber tanks kits with what is now a banned camel flavor @ 2x's 30ml to now 2 joytech evic's with a manger
Originally Posted by jafmf95
Originally Posted by NamVet68
The heads are easy to find, and relatively cheap....they are the same heads used in the EVOD & old PROTANK.
Sort of. The EVOD has the same "base", but the head on the center/battery pin in the EVOD head is slightly fatter. The pin can make contact with the base of the Pro Tank and cause a short. The center pin and the "chimney" are the same as the T3S heads (but the T3S "base" is skinnier.)
As long as the center pin is centered, it will
Originally Posted by Mitey F
I had been curious about cotton wicks for quite some time now. With no wire for my AGA on hand, that wasn't going to happen. Then I saw the http://www.e-cigarette-forum.com/for...anger-t3s.html thread started by floatingtrem.
I figured, "Hell, I've got some extra T3 heads sitting around, why not?". And so it began.
Before I start, 2 things.
1. All of the pictures were taken with my phone, as it's much easier
Originally Posted by xtwosm0kesx
Just realized you could do this (thanks whoever posted it in that thread) in 18350 mode. Put on the Protank/Protank ring, take the extra tube and screw it where the beveled top cap was then install the top cap. It perfectly covers the pyrex on the PT and actually looks pretty slick.