Scubabatdan

A step by step on making a carto from scratch out of a pill fob.


First drill 1/4" holes in both the top and bottom as such:

Now you can insert you choice of blank cart in the top one:


Next measure out your 36ga nichrome, solder the ends, and take 4 strands of silica fire wick and wrap your coil, I use a needle and medical clamps to hold it.
...

I had a user make a suggestion so in the middle of testing out the plausability and actually making it work I was reported with an error. So you benifit, since the new change moved things around a little I have corrected the error while working on v13 and you get it today!

The Change.....

I have created a field for each liquid so you can now set up custom drops = 1ml per liquid. You can now duplicate your small batches into large ones with a much greater accuracy.
...

Ok so I was looking at making a universal mod that uses the PVMA RCA connectors. I wanted it to have the ability to use any atty, be a passthough (PT) or use batteries with out the cord. Shown are a 510 and 901 adapters, the 801 is at the house.
So here is what I came up with, it is a variation of my popper mod.
I call it the Transformer AKA Decepticon

Hope you like it.
Dan
Attached Thumbnails
...

Hi here is a manual pssthrough you can make for $6.50. (Soldering required)

Shoping List:
1.79 AAA Battery Box
2.69 3A Momentary Switch
3.99/4 =.99 RCA adapter (female)
3.99/4 =.99 RCA adapter (male for atty connector)

1 Battery connector from dead battery
1 USB cord from old keyboard or speakers

Making the RCA adapter:
http://www.e-cigarette-forum.com/for...tml#post617709 ...