For the advanced education of mech and RBA users... - Blogs - E-Cigarette Forum
View RSS Feed

State O' Flux

For the advanced education of mech and RBA users...

Rating: 3 votes, 5.00 average.
by , 12-11-2013 at 02:28 PM (3045 Views)
This collection of threads and blog links is intended for those who desire a greater depth of knowledge about mechanical mods, NiMH batteries, rebuildable atomizers, DMMs... electrical theory and it's practical applications in vaping.

The idea was to provide a broad selection of resources, covering the most popular - and often misunderstood - subjects... all in one location.
As we don't all drive our best nails with the same hammer - yes, there is a bit of data overlap and redundancy, but the perspectives are unique - and so, what may not be beneficial to one reader, may be valuable to another.

Lets begin!

> A coil wire / wraps / resistance spreadsheet. This comes from a thread started by nerak, contributed to by many... then recently turned into a nice spreadsheet, that is continually updated by ancient puffer.
Not that useful for determining a coil build as much as to see what others are using - please note that resistance can be a bit "trendy" so what was popular a few months ago may not be now.
Use the "Steam Engine" coil calculator at the bottom of the page to "build" coils on paper... or the internet. You know what I mean.

> Battery max amperage and minimum resistance chart. Credit to Baditude for the making and updating the list in the first place, and to Steam Turbine for taking that list, calculating safe resistance values and making a chart out of it.
Note that this chart has a wide safety margin... and does not take into account the momentary or pulse rate of a battery (more on that below).
It's original intent, I suspect was for those who, besides having issues with doing math... are new rebuilding, new to Ohm's Law and new to determining battery amperage limits.
Those who are "math capable" and battery knowledgeable, may choose to bypass it as being overly cautious. (original thread link for commentary)

> By Super_X_Drifter - A neat pictorial of how to select wire gauge... this offers a most excellent visual reference for those who have better luck with visual aids.

> How Kanthal wire works. I wrote this because there is so much misinformation (and utterly ridiculous BS) out there as to why Kanthal wire doesn't short out when building compressed coils. Yes... there is an actual, fact based reason.

Something I'm leaving in, even though we have Dampmaskin's "Steam Engine" (bottom of page) is a neat, clean & uncluttered Ohm's Law calculator, found at

> Mech voltage drop testing. This is an ongoing standardized test process by Calivapers member - jkuro. It gets updated as people drop off or send him mechs for testing. Probably the most accurate & unbiased mech test list you'll see.
In the real world, unless you're running a 0.1Ω dripper, a few 100ths of a volt difference between mechs is more esoteric than practical... buy what you like and can afford, and you'll be happier than trying to keep up with the "collectors" and ragged edge of zero VD junkies.

> Understanding batteries. This was recently written buy member TUC, and is one of the best written, most detailed and well researched articles I've ever had the pleasure to read. Do not blow this off... even battery savvy people will enjoy this. There's no such thing as knowing too much, at least when it comes to batteries... so, written from a different perspective... Baditude's blogs on the subject. Part I, Part II and "Basics for mods - IMR or Protected".
And yet more battery information... from probably the best single source on the interweb... Battery University.

> Kayfun 3.1 & Kayfun Lite user PDF manuals. There are a boatload of Kafun "clones" out there... and these are the manuals for the original Svoe Mesto Kayfun models. If you have anything Kayfun'ish - from the high end Kebo/UCT Russian to the low end Tobeco Rocket - you might want to look at this. If anyone who reads this is aware of manufacturers PDFs for other attys, shoot me a PM and I'll include them. Gracias.

> Silver conductive grease. I've listed this because there is a good deal of confusion as to what lubricants are conductive and non-conductive... and their appropriate applications. Most products are designed to lubricate and prevent oxidation only... this product does that, and with the high silver content, offers the greatest opportunity of improved conductivity. (the link is to provide product data - it's actually a few $$ cheaper on Amazon)

>Ohm's Law, and common vaping questions. With this, I'll endeavor to answer a few of the more common Ohm's Law calculation questions, as well as briefly explain momentary or "pulse" amp ratings and how they might effect your calculations. There are a few APV references, but I don't think they'll be too offensive.

> SparkFun (Seriously... that's the name) has a very well done "How to use a digital multimeter" guide. There's nothing in-depth on ECF, and considering the variety of meters and number of generic and model specific guides already on the web, there's no reason for anyone to do so.
I've reviewed most of this, and it appears to do a good job of it without burying the "DMM n00b" in techno-babble... and you have a choice of written or video.
The Sparkfun website itself is pretty cool, if you get a chance check it out.

> How tank type atomizers work. From Kanger, Innokin and Aspire clearos and glassos, to Kayfuns, Squapes, Fogger Vs and Taifun GTs... they all operate on the principals of pressure differential. This was written primarily for new users, to provide a basic understanding of how their clearos/glassos work... but if don't have a clue how your Russian 91% works, have a read. Written by me.

As I've been adding information as it seems pertinent, I've exceeded the 10K character limit, so... look for "Advanced Education Part Deux!

So - there we have it. Members that have, of their own accord, spent time producing valuable & practical educational material... for those seeking knowledge and understanding. If you get a chance, somewhere along the line, take a moment to say thank you to them.

As always, take it for what it is, do with it what you will.

Ease, MiltyBuilt, bobrob and 15 others like this.

Submit "For the advanced education of mech and RBA users..." to Digg Submit "For the advanced education of mech and RBA users..." to Submit "For the advanced education of mech and RBA users..." to StumbleUpon Submit "For the advanced education of mech and RBA users..." to Google

Updated 08-05-2014 at 03:03 AM by State O' Flux



  1. State O' Flux's Avatar
    Quote Originally Posted by Dampmaskin
    Thank you for the shoutout. It's awesome that you've put the link in your sig too.

    I just want to let you know that I just purchased a domain for my calculator suite, so it's easier to find, plus it looks prettier. is the new address.

    If you have any requests about new functionality or whatnot, just send me a note and I'll see what I can do.
    Like I said... it's one of the most useful, single point of contact sites on the interweb... and serves to obsolete all the lists, spreadsheets and general BS out there.
    It will continue to be my sig line, at least until 'SE' is more well known... and I can move on to other things, like getting people to use google and do their own damn searches for answers to the simple questions that flood ECF.

    I know... good luck with that, huh.