super_X_drifter;11833055 said:I wanted to cover some items more in depth and include a segment on the tools. I also wanted to provide more detail for wicking it.
Also - unless you are experienced in RBing A's, you should always meter your build using either a cartotometer, a mod with metering capabilities or a multimeter before vaping it. The best way to do it is:
1. Checking resistance (ohms): after the coil is installed, screws tightened and legs trimmed. The coil in the build measured 1.27 ohms.
2. Checking for shorts: After step 1 is complete and coil has been fired / squeezed, wick installed and drip tip installed
Here goes:
Cyclone / IGO-S Micro coil Rebuild Tutorial - YouTube
.