E-Cigarette Forum - Recent Blogs Posts - Blogs
View RSS Feed

Recent Blogs Posts

  1. broken evic head rewire.

    by , 03-25-2014 at 08:12 AM
    I have a broken evic that was lying around so i decided to make a box mod out of it. I looked around for some wiring info for the switches and didn't find any so i made one for anyone who is interested. i will be posting more when i get further into the project.

    first take apart the broken evic. it wont be pretty. just try not to break the board. then pull the 2 switches off. there will be a momentary on the back which is fire. and a spdt on the bottom that was for the control ring. ...
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	ECIG PIC1.jpg 
Views:	166 
Size:	21.0 KB 
ID:	319120   Click image for larger version. 

Name:	ECIG PIC 2.jpg 
Views:	136 
Size:	21.3 KB 
ID:	319122  

  2. RED RED RED, hard to get a good camera shot of the metallic underneath

    by , 07-20-2013 at 12:31 AM (Dgephri and his Powdercoating)
  3. progress on the powdah!

    by , 07-20-2013 at 12:29 AM (Dgephri and his Powdercoating)
  4. "I am soo angrryyyy---want to see RED"

    by , 07-19-2013 at 10:46 PM (Dgephri and his Powdercoating)
    not really, but I am feeling silly. The local Mall NicStation guy so badly wanted his vape coated red, and he gave me 4 samples from Syndicate on the spot, and a spare ECA he doesn't use, and I just couldn't resist. I have needed to coat my first ECA in red to match my first eVic tube, and then I will move on to the matching Blue Stripe, and finally my Green spiral. First I prepped the empty tubes by putting conductive wire inside to carry the charge, and then I plug up the ends with heat resistant ...
  5. Joytech Evic Menu

    by , 07-07-2013 at 02:31 AM
    Quote Originally Posted by roffles18963 View Post
    I'm just gonna assume the manual was for firmware 1.0, when I got mine it came with 1.2 and looked NOTHING like what was in the manual. Which isn't really a big deal. I don't really plug my eVic in to use MVR, I use an external charger and cycle 4 different batteries through it.

    You can change the display on the upper left side of the screen by HOLDING the ring to the left, it'll switch between clock, current puffs/puffs remaining, and wattage/ohms (if using VV mode) or voltage/ohms
    Tags: evic, user manual
Page 1 of 2 12 LastLast