View attachment 189968
View attachment 189970
Igo L Rebuildable Atomizer : Received one today and wasn't expecting much because it's relatively inexpensive. Considering many of my pieces have run over $100, this one costs me $13.95 from Myvaporstore.com. I was very happy with the price, and that I finally found one.
They were kind of hard to find, sold out everywhere.
I had heard mixed reviews about this product, and the first thing I checked was the cap. Mine was not loose, it fits snuggly. Not sure if I was lucky or they fixed the problem of having too loose of a cap.
It comes with an extra screw, o-rings, one piece of stock wire and a piece of silica wick. For my first set up, I used the stock wire and wick that came with it. Not long enough to double it, I had to do a single thread through the coil instead of doubling it. Not knowing what gauge the wire was, I went ahead and did 5 wraps, and it came out 2.4 ohms on my provari. Lining the airhole up with the coil, adding about 10 drops of ejuice, I got a decent throat hit. Some say it is a cool vape, but at 4.6V, it gave me a tasty and warm vape.
For my second set up, I used 30g kanthal A-1 and 5 wraps, which gave 1.5 ohm with my own silica wick, doubling it up. No initial leaks. If it leans towards the air hole, it will leak. Good overall performance.
Side notes: Rebuildable dripping atty (not tank), need a small screwdriver for the screws, and for me, it was a little too tightly packed of an area to work in and was a bit annoying but definitely due able.
They were kind of hard to find, sold out everywhere.I had heard mixed reviews about this product, and the first thing I checked was the cap. Mine was not loose, it fits snuggly. Not sure if I was lucky or they fixed the problem of having too loose of a cap.
It comes with an extra screw, o-rings, one piece of stock wire and a piece of silica wick. For my first set up, I used the stock wire and wick that came with it. Not long enough to double it, I had to do a single thread through the coil instead of doubling it. Not knowing what gauge the wire was, I went ahead and did 5 wraps, and it came out 2.4 ohms on my provari. Lining the airhole up with the coil, adding about 10 drops of ejuice, I got a decent throat hit. Some say it is a cool vape, but at 4.6V, it gave me a tasty and warm vape.
For my second set up, I used 30g kanthal A-1 and 5 wraps, which gave 1.5 ohm with my own silica wick, doubling it up. No initial leaks. If it leans towards the air hole, it will leak. Good overall performance.
Side notes: Rebuildable dripping atty (not tank), need a small screwdriver for the screws, and for me, it was a little too tightly packed of an area to work in and was a bit annoying but definitely due able.
