The ReNew 2.7 ohm Cartomizer anyhone use these? - Page 2
Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 22

Thread: The ReNew 2.7 ohm Cartomizer anyhone use these?

  1. #11
    Super Member Verified Member
    ECF Veteran
    vapordraggin101's Avatar
    Join Date
    Dec 2009
    Location
    Tebo Lake
    Posts
    324

    Default

    Quote Originally Posted by Slurp812 View Post
    Yes, in fact I love these things! I have the 2.5 ohm ReNew XL in steel. It feels lighter, like the steel is thinner. That may make it easier to punch holes in them. Not sure, I dont use tanks. The outer diameter is the same as a Resurector as far as I can tell. It also has less restriction than a Resurector. But it does have the quicker absorbing wadding like the Resurector/smoktech type cartos. Iv only used one so far, but that first one is working great. I will post back when I pull out the 2nd one...
    hi, just wondering how these are working for you and where you got them? Thanks
    To Locate USA/International Ecig & E-Liquid Venders in your Area or while Traveling visit VaporSearchUSA.com
    Over 6000 Vendors Listed !!!

  2. #12
    PV Master ECF Veteran r77r7r's Avatar
    Join Date
    Feb 2011
    Location
    US
    Posts
    4,969

    Default

    Clouds of Vapor

  3. #13
    PV Master Verified Member
    ECF Veteran
    anavidfan's Avatar
    Join Date
    Jun 2012
    Location
    southern calif
    Posts
    7,150

    Default

    I thank you all for the input, I was going to order some but they were sold out a little over a week ago, I will go and check again now.
    "me, I'm on the side of the Angels............ but the Devil is my best friend"






  4. #14
    Super Member Verified Member
    ECF Veteran

    Join Date
    Jun 2012
    Location
    MA
    Posts
    994

    Default

    I got a new punch, a bullet piercing valve which punches tiny tiny holes. Since I use mostly VG I did 4 holes... We'll see how that goes. So far, no leaks. I did notice that if the holes are too low in the tank (1mm or less from bottom) it WILL leak. If higher it will not, Maybe because of vacuum. Boges I can put holes as low as possible without a problem.
    With hole 1mm up A primer puff gets it gurgly. Vapor production is very good. Filling is easier than boges.

    I used a syringe to fill it with my extreme ice juice, and I'm getting a flavor I do not get with boges. Sort of plasticy. Not sure if its cause I was used to bogegated boges, or if I burnt a little of the filler (not enough to say burnt carto) or if its the Renew's themselves.
    Last edited by Neya; 10-12-2012 at 07:11 PM.

  5. #15
    PV Master ECF Veteran r77r7r's Avatar
    Join Date
    Feb 2011
    Location
    US
    Posts
    4,969

    Default

    I always found good Boges had very little "start-up" taste compared to others. Maybe rinse Before using?

  6. #16
    Super Member Verified Member
    ECF Veteran

    Join Date
    Jun 2012
    Location
    MA
    Posts
    994

    Default

    Quote Originally Posted by r77r7r View Post
    I always found good Boges had very little "start-up" taste compared to others. Maybe rinse Before using?
    Thats probably what it is then. I didnt notice it with the other one I tried in my first renew, which was a coffee vape. The ice type I'm using is a very "clean" taste, I can always tell if theres something behind the scenes mudding it.

  7. #17
    Super Member Verified Member
    ECF Veteran

    Join Date
    Jun 2012
    Location
    MA
    Posts
    994

    Default

    I ran like 2 tankfulls through it, albeit, small tanks - maybe 1.5ml ea? And was still getting that plasticy yuck blech gah.

    Accidently topped off my menthol tank with strawberry fields(same transfer bottles and labels) and surprisingly, the very light strawberry in the menthol did kill the plastic flavor.

  8. #18
    PV Master ECF Veteran r77r7r's Avatar
    Join Date
    Feb 2011
    Location
    US
    Posts
    4,969

    Default

    How'd you come up with the idea for the bullet valve? Work well? Does it dent the carto?

  9. #19
    Super Member ECF Veteran Slurp812's Avatar
    Join Date
    Jun 2011
    Location
    Northwest Ohio
    Posts
    391

    Default

    I got them from Clouds of Vapor. Opened the first one 9/20/12, and just had to toss it and reach for another. Draw was getting tight, and starting to taste not so good after 3 weeks plus. The 2nd one is as good as the first. Kinda airy, but good taste. They are made by smoktech according to the box. I use MadVapes Chinese 3&5 24mg. Its very clear, not much flavor. so it doesn't clog cartos very fast.

  10. #20
    PV Master Verified Member
    ECF Veteran
    anavidfan's Avatar
    Join Date
    Jun 2012
    Location
    southern calif
    Posts
    7,150

    Default

    Quote Originally Posted by Neya View Post
    I got a new punch, a bullet piercing valve which punches tiny tiny holes. Since I use mostly VG I did 4 holes... We'll see how that goes. So far, no leaks. I did notice that if the holes are too low in the tank (1mm or less from bottom) it WILL leak. If higher it will not, Maybe because of vacuum. Boges I can put holes as low as possible without a problem.
    With hole 1mm up A primer puff gets it gurgly. Vapor production is very good. Filling is easier than boges.

    I used a syringe to fill it with my extreme ice juice, and I'm getting a flavor I do not get with boges. Sort of plasticy. Not sure if its cause I was used to bogegated boges, or if I burnt a little of the filler (not enough to say burnt carto) or if its the Renew's themselves.
    You said "bullet piercing valve"? is it for piercing bullets for use in guns or the bullet style piercing valves for inline tubing? I saw some on amazon but they dont look like they are for gun bullets. Just wanted to clarify.
    thanks, maybe a link?

    PS, I still haven't gotten around to trying the renews. Ive been having good luck with the boges I get from vaporbeast and I just dont know, especially with the one person that stated they had a bad taste? I love my juices and they aren't cheap, so I dont know if I want to go thru the pain of rinsing cartos before use especially since they are not cheap either.
    Last edited by anavidfan; 10-16-2012 at 08:44 PM.
    "me, I'm on the side of the Angels............ but the Devil is my best friend"






Page 2 of 3 FirstFirst 123 LastLast

Tags for this Thread

Bookmarks