Dura carts

[Unforgivensinner]

Well I put this in the 901 section but haven't received a response so I'll try here.
ok well I ordered some dura carts for my 901 because im sick of topping up so much. Is there a big size difference in the cart it self, if so how much. And is it possible for anyone to put up a side by side picture of them. Im just hoping that I will still be able to use my case with them, if not I will have to cut the indents bigger.

[scrubadub]

Have you tried searching the forum? This has been talked about a lot and has had a video made about it. Try using the google search bar at the bottom left of the page as it gives better results than the forum search.

[HockerMagnum]

I read about cartridges going dry while still half full. Someone mentioned a pin hole near upper end of cart so I tried it. Vaped for hours with no reduction in fog until cartridge was completely empty. I have NJoy/RN4072/801 style and this is what it looks like.cartridge.jpg

[lorraineg57]

I read about cartridges going dry while still half full. Someone mentioned a pin hole near upper end of cart so I tried it. Vaped for hours with no reduction in fog until cartridge was completely empty. I have NJoy/RN4072/801 style and this is what it looks like.Attachment 2284

I'm not sure I understand your diagram...I have a 901. Are these pics both of cartridges?

[HockerMagnum]

Diagram is of the NJoy only. The 801 is slightly different in the way the cartridge and mouthpiece fit together.

[unixian]

Cant get any more Dura carts it seems (for the time being anyway). Does anyone know of carts from another model (Janty or otherwise) that would be compatible. Or does anyone know of another place to buy Dura carts?

[Shadowdr]

Cant get any more Dura carts it seems (for the time being anyway). Does anyone know of carts from another model (Janty or otherwise) that would be compatible. Or does anyone know of another place to buy Dura carts?

If you are talking about Dura-C carts then any 510 cart will work the same, I didn't know it but they fit quite well into a 901. I only have a few bad 901's(going to use for mod connections for 4081's) so I don't know if they are the right length to fit to the bridge.