ZFM Zero Filler Mod - E-Cigarette Forum

SCOTTYBALLS · 12-06-2009, 03:12 PM

OK here it is No filler! No polly! No foam! No Shopping! No Spring! No more making plugs 100% reusable! How dose it work? the bridge is in the resivor of juice and takes it when it needs it with out any flooding..

What you need

Place the cap that comes with your carts firmliy on the cart till you see a black outline of the cart threw the cap

Cut along the black line

You should end up with somthing like this..

Now you need to make a decission either cut a x or * in the center of the rubber plug or punch a 2mm hole in the center both work really well!

When using the X or star it will open up when the atty's bridge makes contact with it..

Now cut a straw to 15mm give or take 1mm I just eyeball it.. so you can make a shelf for the plug to rest on..

Insert the straw all the way to the bottom and fill with juice to the top of the straw.. if you desire you can cut vents into the straw for more juice room up to you.

Insert rubber plug down till it hits the straw ENJOY! if you get it right you will know it and will not have to make another plug again.. if you feel your atty is not getting enough juice make the X or star bigger or try the hole.. I relize this takes some skill to get it right if there is a demand for them pm me and ill make packs of 5 for small fee..

eclypse · 12-06-2009, 03:23 PM

Dont get it? You did not explain the last part where you inserted the plug? I thought you said no plug?

I'm guessing the plastic is touching the atty?

Here i thought this was going to be my new mod i came up with last night.

SCOTTYBALLS · 12-06-2009, 03:40 PM

Quote:

Originally Posted by eclypse

Dont get it? You did not explain the last part where you inserted the plug? I thought you said no plug?

I'm guessing the plastic is touching the atty?

Here i thought this was going to be my new mod i came up with last night.

I said no more making plugs.. In other words when you are done with it you will not need to make anymore.

I fixed the last step sorry I thought it was self expalanatory.

eclypse · 12-06-2009, 03:46 PM

Ok.. I'll wait and see if someone melts the plastic.. If not i'll try it ofcourse. Me thinks the juice will stick inside the cart and you'll melt the plastic.

Hope it works.

SCOTTYBALLS · 12-06-2009, 03:55 PM

Quote:

Originally Posted by eclypse

Ok.. I'll wait and see if someone melts the plastic.. If not i'll try it ofcourse. Me thinks the juice will stick inside the cart and you'll melt the plastic.

Hope it works.

Actually I had my barleby in my pocket at work yesterday and forgot to turn the switch off and it melted the plastic cart all the way around the plug totally destroyed the cart however I pulled the plug out and it was still perfect.. so after seeing that Im going to say no it will not melt

Scottbee · 12-06-2009, 03:56 PM

The cart caps aren't plastic. They're silicone if I'm not mistaken. Melting shouldn't be an issue.

eclypse · 12-06-2009, 04:05 PM

Quote:

Originally Posted by SCOTTYBALLS

Actually I had my barleby in my pocket at work yesterday and forgot to turn the switch off and it melted the plastic cart all the way around the plug totally destroyed the cart however I pulled the plug out and it was still perfect.. so after seeing that Im going to say no it will not melt

Well in that case.. Sweet!

firechick · 12-06-2009, 04:18 PM

Any leaking issues? This is a great concept, I'm just a little concerned about dumping a ml of fluid if it leaks. I carry a Janty stick at work.

Cherice · 12-06-2009, 04:25 PM

I just tried this and it works. Refilling will of course need to be done with a syringe, but other than that, so far...so good.

smonomo · 12-06-2009, 04:34 PM

Scottyballs, I would say you slipped up big time with this mod..

IF...

You didn't take out a patent on it before posting.

Testing on my 801 as I type..

Home run so far!!! ...using the + cut.

12-06-2009, 03:12 PM	#1
SCOTTYBALLS Supplier Modder/Manufacturer Join Date: Oct 2009 Location: Greenville, S.C. Posts: 456	ZFM Zero Filler Mod OK here it is No filler! No polly! No foam! No Shopping! No Spring! No more making plugs 100% reusable! How dose it work? the bridge is in the resivor of juice and takes it when it needs it with out any flooding.. What you need Place the cap that comes with your carts firmliy on the cart till you see a black outline of the cart threw the cap Cut along the black line You should end up with somthing like this.. Now you need to make a decission either cut a x or * in the center of the rubber plug or punch a 2mm hole in the center both work really well! When using the X or star it will open up when the atty's bridge makes contact with it.. Now cut a straw to 15mm give or take 1mm I just eyeball it.. so you can make a shelf for the plug to rest on.. Insert the straw all the way to the bottom and fill with juice to the top of the straw.. if you desire you can cut vents into the straw for more juice room up to you. Insert rubber plug down till it hits the straw ENJOY! if you get it right you will know it and will not have to make another plug again.. if you feel your atty is not getting enough juice make the X or star bigger or try the hole.. I relize this takes some skill to get it right if there is a demand for them pm me and ill make packs of 5 for small fee.. __________________ ZFM Carts WWW.ZFMVAPORS.COM Last edited by SCOTTYBALLS; 12-06-2009 at 03:37 PM.

12-06-2009, 03:56 PM	#6
Scottbee Ultra Member Join Date: Sep 2009 Location: Okauchee Lake, WI Posts: 2,859	The cart caps aren't plastic. They're silicone if I'm not mistaken. Melting shouldn't be an issue. __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-06-2009, 03:23 PM	#2
eclypse Banned Join Date: Sep 2009 Location: Macomb MI Posts: 815	Dont get it? You did not explain the last part where you inserted the plug? I thought you said no plug? I'm guessing the plastic is touching the atty? Here i thought this was going to be my new mod i came up with last night.

12-06-2009, 03:46 PM	#4
eclypse Banned Join Date: Sep 2009 Location: Macomb MI Posts: 815	Ok.. I'll wait and see if someone melts the plastic.. If not i'll try it ofcourse. Me thinks the juice will stick inside the cart and you'll melt the plastic. Hope it works.

12-06-2009, 04:18 PM	#8
firechick Super Member ECF Veteran Join Date: Jun 2009 Location: Upstate New York Posts: 358	Any leaking issues? This is a great concept, I'm just a little concerned about dumping a ml of fluid if it leaks. I carry a Janty stick at work.

12-06-2009, 04:25 PM	#9
Cherice Super Member Join Date: Sep 2009 Location: Palm Harbor, FL Posts: 435 Tweet this post!	I just tried this and it works. Refilling will of course need to be done with a syringe, but other than that, so far...so good.

12-06-2009, 04:34 PM	#10
smonomo Super Member Join Date: Oct 2009 Location: USA, Northeast. Posts: 324	Scottyballs, I would say you slipped up big time with this mod.. IF... You didn't take out a patent on it before posting. Testing on my 801 as I type.. Home run so far!!! ...using the + cut.