Results 1 to 4 of 4

Thread: Kanger 1.5 Ohm Evod, PT 1/2, etc. Coil Heads available?

  1. #1
    Super Member Verified Member
    ECF Veteran

    Join Date
    Dec 2011
    Location
    New Mexico
    Posts
    934

    Default Kanger 1.5 Ohm Evod, PT 1/2, etc. Coil Heads available?

    Somewhere I thought I saw where Kanger was going to make 1.5 Ohm Coil Heads available for the Evod, ProTank 1/2 and the others that it will fit.

    Does anyone know and have tried them? Do they Ohm out at pretty close to !.5 Ohms? The 1.8 Ohm ones I've gotten are all over the place, usually higher than advertised, sometimes .7 Ohms higher. Crappy QC.

  2. #2
    Ultra Member Verified Member
    ECF Veteran
    SupplyDaddy's Avatar
    Join Date
    Oct 2012
    Location
    San Antonio, Texas
    Posts
    1,839

    Default

    Kanger makes the following coils:
    1.5 Ohms 1.8 Ohms 2.2 Ohms 2.5 Ohms each for the-
    Kanger Protank 1&2, Mini Protank 1&2 heating coil
    Kanger E-vod heating coil
    Kanger MT3S / T3S heating coil

    (All three are still shown on their wholesale pages, but expect to see the evod coils disappear according to the next statement)

    They state the following:
    Bottom coil for Kanger Protank & mini Protank are compatiable with Kanger E-VOD coil.
    Kanger T3S,mini T3S and MT3S use the same bottom coil.

    Factory page Electronic Cigarette,kanger,E-Cigarette,E-Cigs,quit smoking,Health Cigarette
    Wholesale page KangerTech

    The coils I have are for T3S and evod specifically, although I have been able to switch both to the other.
    I've not had a factory coil vary more than .2 ohms.

  3. #3
    Member
    Join Date
    May 2013
    Location
    Los Angeles
    Posts
    14

    Default

    Found these in stock: http://www.texasselectvapor.com/kang...il-1-5-5-pack/

    I'm sure you can expect the 1.5 ohm to be a little off as well. 1.4-1.6 probably, based on my experience with their 2.2 and 2.5 heads. Never used a 1.5 though.

  4. #4
    Super Member Verified Member
    ECF Veteran

    Join Date
    Dec 2011
    Location
    New Mexico
    Posts
    934

    Default

    Quote Originally Posted by seeber View Post
    Found these in stock: http://www.texasselectvapor.com/kang...il-1-5-5-pack/

    I'm sure you can expect the 1.5 ohm to be a little off as well. 1.4-1.6 probably, based on my experience with their 2.2 and 2.5 heads. Never used a 1.5 though.
    Ah, thank you, that's what I wanted. Availability and price.

    Thanks.

Tags for this Thread

Bookmarks