Where is the ohm stamp on the SkokTech Aro heads?
Results 1 to 7 of 7
Like Tree4Likes
  • 1 Post By Trayce
  • 1 Post By Pocha
  • 1 Post By Trayce
  • 1 Post By SnowDog

Thread: Where is the ohm stamp on the SkokTech Aro heads?

  1. #1
    Super Member Verified Member
    ECF Veteran
    Supporting Member
    SnowDog's Avatar
    Join Date
    Jun 2013
    Location
    Springfield, IL
    Posts
    580

    Default Where is the ohm stamp on the SmokTech Aro heads?

    I just picked up a new SmokTech Aro Pyrex at the local vape shop. I took the heads out to see what the ohm rating is and I don't see a stamp on them. I don't see the information stamped anywhere on the heads.

    Is this normal? Am I overlooking something?
    Last edited by SnowDog; 10-31-2013 at 09:46 PM.


  2. #2
    Super Member
    Join Date
    Mar 2013
    Location
    Multiversal
    Posts
    736

    Default

    On my aftermarket Aro heads there is also no stamp, but I bought a few five-packs and each 5-pk comes in a small box. The ohms are on a clear sticker on one end of the box. However I'd double-check with a mod or VM.
    SnowDog likes this.

  3. #3
    Super Member Verified Member
    ECF Veteran
    Supporting Member
    SnowDog's Avatar
    Join Date
    Jun 2013
    Location
    Springfield, IL
    Posts
    580

    Default

    Unfortunately I don't have a voltmeter or a mod. The heads are the ones that were installed in the Aro when I bought it. I haven't bought any extra heads yet.

    Do the tanks all have the same standard ohm heads in them when new?


  4. #4
    Super Member Verified Member
    ECF Veteran
    Supporting Member
    SnowDog's Avatar
    Join Date
    Jun 2013
    Location
    Springfield, IL
    Posts
    580

    Default

    As far as I can tell, the tanks come with a 2.4 ohm head installed. I'm not sure if all of them do but the ones I found on websites all say they have 2.4 ohm heads in them.

    I'll go ahead and assume mine is 2.4 ohms unless someone knows otherwise.


  5. #5
    Super Member Verified Member
    ECF Veteran
    Pocha's Avatar
    Join Date
    Aug 2013
    Location
    SF CA
    Posts
    370

    Default

    Yeah...I couldn't find a marking on the actual heads...just the box they come in.
    SnowDog likes this.

  6. #6
    Super Member
    Join Date
    Mar 2013
    Location
    Multiversal
    Posts
    736

    Default

    ... I can't check the original heads because they long ago got mixed in with my aftermarket heads, so cannot verify the stock heads. And the aftermarket heads are available in a variety of ohms, so, that doesn't help you. 2.4 is probably a safe assumption, but start with lower power and work your way up to the sweet spot, assuming a VV device.
    SnowDog likes this.

  7. #7
    Super Member Verified Member
    ECF Veteran
    Supporting Member
    SnowDog's Avatar
    Join Date
    Jun 2013
    Location
    Springfield, IL
    Posts
    580

    Default

    I filled up the Aro last night with some Five Pawns Bowden's Mate. Put it on a Spinner and found my sweet spot at about 3.9 volts. Nice clearomizer. The Bowden's Mate tastes slightly better in the Aro than it does in my Evod and I loved it my Evod. Could just be that the heads are brand new but so far I'm impressed with the flavor and performance of the Aro.

    I'll be going back to the local shop soon to stock up on some replacement heads. I think I'll stick with 2.4 ohm heads for now as I'm delighted with the performance.
    Trayce likes this.


Tags for this Thread

Bookmarks