Page 1 of 91 123451151 ... LastLast
Results 1 to 10 of 901
Like Tree811Likes

Thread: Introducing the Griffin Rebuildable Atomizer Tank

  1. #1
    Forum Supplier gormly's Avatar
    Join Date
    Jun 2011
    Location
    Connecticut USA
    Posts
    4,426

    Cool Introducing the Griffin Rebuildable Atomizer Tank

    I decided to make a thread dedicated to this atomizer because I am pretty sure it will be both popular and there will be a lot of questions I might not be able to answer as I am a newbie to rebuildables and others can help us all with this new cool stuff!

    So, with that said and because they are IN STOCK and not "weeks away".. I give you...

    The Griffin Rebuildable Atomizer Tank
    (did clone)

    New! Finally an affordable rebuildable atomizer with a tank system holding up to 4-5ml




    Not generally for beginners unless you want to get your feet wet with an easily rebuilable atomizer. Even if you don't this is a great item to have to test liquids or get the best vape possible, easy to clean the parts or remove them entirely. This items come ready to vape so even if you have no plans to rebuild this is a nice addition to your vape collection.

    Made with Stainless steel and plated Copper/Brass (not sure which yet, I will scrape one soon to find out). All parts are plated so there is no worry about copper or brass contacting your eLiquid.
    Can be disassembled and put back together in minutes, very easy to clean, use and rebuild.

    16mm Overall Diameter
    53mm Overall Length assembled (without drip tip)

    Comes with
    1 fully built Griffin (using ss mesh)
    1 spare roll of coil
    1 Nice metal drip tip
    1 "Gift" tin


    Please note, as this comes in a tin and it is not really packed all that well it will rattle around a bit. I do not want to deprive you of the tin it comes in as it can come in handy to store parts for your Griffin (extra parts coming soon) Also, due to the rebuildable nature of this item, there are no refunds unless there is a defective part ie, a screw is bad or something similar. Vape quality with the included starter mesh and coil is not warrantied as it is fully customizable.


    Eric's Review:
    whoa! Just got this did "clone", just filled just vaped it.. very very nice. Although I recommend a good cleaning with filtered tap water or alcohol as this comes preassembled and of course first vape doesn't mean anything as this is intended for your rebuilding pleasure not a throw away vape, so if the vape is not to your liking out of the box, modify it. But me.. I like it as is
    Very happy to have this on board at DV



    Ok now on to some pictures of the item and disassembly to get an idea of how it works.















    To disassemble first remove the cone.

    Next unscrew the tiny screw with the included l Wench, unscrew the one the coil is connected to, you do not need to remove the other screw (it's the fill hole)



    in the picture below I have taken the screw of and you can see the empty hole with the coil laying around the empty hole.
    Now unscrew the top screw, this is where the other side of the coil connects, once unscrewed the coil is free to be removed from the stem.




    Next carefully slide out the mesh



    Unscrew the next screw



    Continue with the third screw



    Now you can push the center post down out the bottom



    another angle



    Once the stem is out you can take off the top by unscrewing it from the internal support pin

    You can see the support pin inside



    Next pull off the tank



    Unscrew the support pin from the base



    That's it, you have now dissembled the Griffin and it can be cleaned and rebuilt the same way reversing the steps.


    BEFORE ANYONE ASKS
    1. Yes I am getting mesh for the Griffin
    2. Yes I am getting coils for the Griffin
    3. Yes I am getting replacement parts for the Griffin
    4. Yes I am getting clear and or colored tanks for the Griffin if I can get them

    Oh and Griffin is a name I gave it while talking with LD on skype one day it's basically like a Pheonix on steroids so I figured I'd give it a related mythical name. let's hope it sticks because it's a much better name than "did clone" If you talk about it on other forums, feel free to call it the Griffin
    Last edited by gormly; 09-14-2012 at 09:06 PM.
    Please do not contact me via ECF's PM system, please use email or the website contact form :)

  2. #2
    Senior Member ECF Veteran
    Join Date
    Apr 2012
    Location
    Phelan, CA
    Posts
    233

    Default

    Humm nice ripoff you might as well just call it a DID
    Aron Gatt likes this.

  3. #3
    Forum Supplier gormly's Avatar
    Join Date
    Jun 2011
    Location
    Connecticut USA
    Posts
    4,426

    Default

    Quote Originally Posted by hdzrtvap View Post
    Humm nice ripoff you might as well just call it a DID
    It's better than it's original china name, which was "A-Bomb"
    Please do not contact me via ECF's PM system, please use email or the website contact form :)

  4. #4
    ECF Guru Verified Member
    ECF Veteran
    Dieseler's Avatar
    Join Date
    Sep 2011
    Location
    Illinois
    Posts
    15,717

    Default

    Gormly does the e-liquid slip out past the stainless mesh wick thru the hole its in as i see not plastic washer- when tipped or laid on its side .
    Thanks this looks like a nice unit.

  5. #5
    Forum Supplier gormly's Avatar
    Join Date
    Jun 2011
    Location
    Connecticut USA
    Posts
    4,426

    Default

    Quote Originally Posted by Dieseler View Post
    Gormly does the e-liquid slip out past the stainless mesh wick thru the hole its in as i see not plastic washer- when tipped or laid on its side .
    Thanks this looks like a nice unit.
    you mean leak? Not that I can see, I held it upside down for about 30 seconds, nothing came out, it does get a little "wet" inside but that's to be expected from condensation of the liquid but so far no leaks, I'll leave my unit on it's side all night see what happens.
    Dieseler and MrPicC like this.
    Please do not contact me via ECF's PM system, please use email or the website contact form :)

  6. #6
    ECF Guru Verified Member
    ECF Veteran
    Dieseler's Avatar
    Join Date
    Sep 2011
    Location
    Illinois
    Posts
    15,717

    Default

    Well Gormly get busy cause im on your website and placing my very first order from you. ; )
    gormly, sonicdsl and Zooker like this.

  7. #7
    Forum Supplier gormly's Avatar
    Join Date
    Jun 2011
    Location
    Connecticut USA
    Posts
    4,426

    Default

    Quote Originally Posted by Dieseler View Post
    Well Gormly get busy cause im on your website and placing my very first order from you. ; )
    Call me Eric, Gormly sounds so.... icky LOL
    Glad to have you on board, I'll do my best.

    Love the avatar!
    Dieseler and Zooker like this.
    Please do not contact me via ECF's PM system, please use email or the website contact form :)

  8. #8
    Super Member Verified Member
    ECF Veteran
    Supporting Member
    carlton M's Avatar
    Join Date
    Mar 2011
    Location
    Walnut Creek Ca
    Posts
    574

    Default

    Oh! You guys! Dangit! Don't know why but I was drawn (called?) to look at your site today, with out the thought of buying anything, then I saw the Griffin, and before I knew it I was ordering it! Have you hypnotized me? my wife is going to kill me if I spend anymore$$$!
    That's what I will tell her- Yah...yah! I was hypnotized!
    Seriously thanks for always coming up with something new that I can actually afford!
    sonicdsl, Dieseler and Zooker like this.
    2- VaporWerks STRATUS' RBAs, GG-Penelope, EpipeMod, Silver Silver Bullet, Megalodon, Black BB (+ extension tube),
    the "Stick" 18650-box mod(by eigworkshop), the Natural, Several homemade pipe and box mods, SD Key chain, Volcano Inferno

  9. #9
    Forum Supplier gormly's Avatar
    Join Date
    Jun 2011
    Location
    Connecticut USA
    Posts
    4,426

    Default

    Quote Originally Posted by carlton M View Post
    Oh! You guys! Dangit! Don't know why but I was drawn (called?) to look at your site today, with out the thought of buying anything, then I saw the Griffin, and before I knew it I was ordering it! Have you hypnotized me? my wife is going to kill me if I spend anymore$$$!
    That's what I will tell her- Yah...yah! I was hypnotized!
    Seriously thanks for always coming up with something new that I can actually afford!
    That's the goal...

    at this rate these will be gone by morning.. HOLY MOLY!!! better get on the horn and order some more!
    Please do not contact me via ECF's PM system, please use email or the website contact form :)

  10. #10
    ECF Guru Verified Member
    ECF Veteran
    Dieseler's Avatar
    Join Date
    Sep 2011
    Location
    Illinois
    Posts
    15,717

    Default

    Thanks Eric since i placed order i looked and the ones in stock dropped by 5 already, i wish you well .
    Im familar with rebuildables and making coils etc and look forward to future parts for it. A clear tank for it or something with a viewing window would be nice. In the mean time i will enjoy this tank as i can wrap the coils and tune it to my vaping pleasure.
    Thanks again
    Martin

    PS thast our dog and very mild manner easy going and listens well, we have a AKC Yorkie who is a genuine pain but we love him regardless !
    gormly and Zooker like this.

Page 1 of 91 123451151 ... LastLast

Tags for this Thread

Bookmarks