Rebuildable Parts List Thread (Griffin, Hydra, Phoneix, Tiamat etc)
Results 1 to 8 of 8
Like Tree10Likes
  • 1 Post By gormly
  • 3 Post By Swarley
  • 3 Post By MJBinNM
  • 2 Post By gormly
  • 1 Post By bwoodroof

Thread: Rebuildable Parts List Thread (Griffin, Hydra, Phoneix, Tiamat etc)

  1. #1
    Forum Supplier gormly's Avatar
    Join Date
    Jun 2011
    Location
    Connecticut USA
    Posts
    4,433

    Default Rebuildable Parts List Thread (Griffin, Hydra, Phoneix, Tiamat etc)

    I am starting this thread in the hopes that some of you well informed and innovative guys and gals can populate it with the parts needed for any of the rebuildables. I receive a LOT of inquiries about screws, tanks, glass, wick etc.

    If you know of a perfectly fitting screw replacement, a replacement glass tank, or anything even remotely related to a rebuildable I sell please post it here like so:


    Item: Griffin
    Part: Negative Screw
    Where: (link to online hardware supplier or part number at Home Depot etc)
    Cost: (if known)

    Item: Tiamat
    Part: Hole Grommet
    Where: (link to online hardware supplier or part number at Home Depot etc)


    If we keep this thread JUST to list parts it will keep it all organized in one place.
    Please do not post questions, or follow ups (unless it points out a wrong part) post just parts if you have or know of them.

    (Yes I know I made a spelling error in the title lol)
    Big Screen D likes this.
    Please do not contact me via ECF's PM system, please use email or the website contact form :)

  2. #2
    Mod Addict Team ECF (folding@home)
    Verified Member
    ECF Veteran
    Swarley's Avatar
    Join Date
    Mar 2011
    Location
    Nor Cal
    Posts
    1,658

    Default

    Item: Tiamat
    Part: Glass Tank
    Where:https://www.ibtanked.com/custom-cut-...x-2-5mm-detail
    Ask for them to be cut to 23mm in length and your good to go

    Sorry for outsourcing Eric
    d9mel, wolandepiphanius and gormly like this.
    Vela760,Vari,BBM,EA Mod,CCTS,ShanDNAMod
    ChemesisX2,Choldiac,ChiN-U

    EnigmaRDA,DID,ST(c),AL1,Kraken(c),PulseG(c),KFL+(c)X2
    Vapaholic Creations

  3. #3
    Senior Member ECF Veteran MJBinNM's Avatar
    Join Date
    Feb 2011
    Location
    New Mexico
    Posts
    238

    Default Screws for the original Griffin and the Stainless top Griffin..

    Screws for the original Griffin and the Stainless top Griffin...

    They have these at amazon in packs of 100. You can get them in either phillips or hex head in different lengths. They are M2-0.40. The 8mm length will almost reach the bottom of the top plate which will grab the maximum amount of threads.

    Metric DIN 7985 18-8 Stainless Steel Pan Head Machine Screw, #1 Phillips Drive, M2-0.4 Thread

    Metric 304 Stainless Steel Socket Head Cap Screw, Hex Socket Drive

  4. #4
    Forum Supplier gormly's Avatar
    Join Date
    Jun 2011
    Location
    Connecticut USA
    Posts
    4,433

    Default

    There is no need to buy these in packs of 100 guys and gals, I will be buying them and putting them on site.

    I should have them by Tuesday some time.

    That said, I will be putting them in packs. So they will be 1.99 for the set I think with the nuts, too expensive for sure, but if you have bought a griffin and I can verify it you can write in the comments of any order for a FREE pack of them (one free pack per griffin purchased).

    This free offer is not for shipping them alone, you'd have to add them to an order.

    I think you all know I already feel guilty about the costs but they can't be helped. Last time I put something on the site for .99 cents I was overwhelmed by one type orders and it really hurt the bottom line. Selling one item for .99 is not practical.


    swarley... it's not a problem to post something that I cannot supply, that said I will see if I can get some of those as well.
    Please do not contact me via ECF's PM system, please use email or the website contact form :)

  5. #5
    Full Member Verified Member
    Join Date
    Nov 2012
    Location
    Cookeville, TN
    Posts
    47

    Default

    Here is where I get all of my o-rings from.
    The O-ring Store - Online O-rings, Hydraulic Seal Kits, and O-ring Kits, We make placing your o-ring order and getting your o-rings online easy!
    Cheap when you order a 100 of them. My drip tip orings end up being 6 cents each. And they have flat rate shipping USPS of $5.00, so I always stock up.
    gormly likes this.

  6. #6
    Full Member Verified Member
    Join Date
    Feb 2011
    Location
    Ohio
    Posts
    38

    Default

    Quote Originally Posted by gormly View Post
    There is no need to buy these in packs of 100 guys and gals, I will be buying them and putting them on site.

    I should have them by Tuesday some time.

    That said, I will be putting them in packs. So they will be 1.99 for the set I think with the nuts, too expensive for sure, but if you have bought a griffin and I can verify it you can write in the comments of any order for a FREE pack of them (one free pack per griffin purchased).

    This free offer is not for shipping them alone, you'd have to add them to an order.

    I think you all know I already feel guilty about the costs but they can't be helped. Last time I put something on the site for .99 cents I was overwhelmed by one type orders and it really hurt the bottom line. Selling one item for .99 is not practical.


    swarley... it's not a problem to post something that I cannot supply, that said I will see if I can get some of those as well.

    Are these screws in yet and available for purchase? I have an order ready to place as soon as they become available.

  7. #7
    Forum Supplier gormly's Avatar
    Join Date
    Jun 2011
    Location
    Connecticut USA
    Posts
    4,433

    Default

    Quote Originally Posted by AMUP0121 View Post
    Are these screws in yet and available for purchase? I have an order ready to place as soon as they become available.
    they are but I have an issue with the nuts for the Tiamat, they are thin, I don;t think it matters but they are much thinner than the ones that come with it.

    if you'd like a set just ask in the comments because I haven't posted them yet. I have others on the way to see if they are the right thickness to match the originals and will post them up when I get them.

    see the post in the Tiamat thread first though I posted about all the screws.
    Please do not contact me via ECF's PM system, please use email or the website contact form :)

  8. #8
    Moved On ECF Veteran
    Join Date
    Aug 2011
    Location
    Kapetown
    Posts
    556

    Default

    Quote Originally Posted by Swarley View Post
    Item: Tiamat
    Part: Glass Tank
    Where:https://www.ibtanked.com/custom-cut-...x-2-5mm-detail
    Ask for them to be cut to 23mm in length and your good to go

    Sorry for outsourcing Eric
    Thanks for linking, good stuff!

Bookmarks