+ Reply to Thread
Page 2 of 4 FirstFirst 1234 LastLast
Results 11 to 20 of 34
My DIY Guide for Newbies--Carts and Liquids in Tips and Tricks; Originally Posted by brownbrown4 SUPER DITTO... i was chicken to start making some VG based juice(fear of losing my precious ...
  1. #11
    Full Member
    Join Date
    Jul 2009
    Posts
    44

    Default

    Quote Originally Posted by brownbrown4 View Post
    SUPER DITTO...
    i was chicken to start making some VG based juice(fear of losing my precious $). now i have a starting point... thanks
    Count me in on making this a sticky!!! I spent a few days looking around here and found exactly what this guide details. The only thing I would update is 'where' in walmart to find these things...

    Wilton's Glycerine
    *around the cake baking area*

    High Loft Quilter’s Polyester Batting
    *around the sewing Dept.*

  2. Advertisement
  3. #12
    Full Member ECF Veteran
    Join Date
    Jul 2009
    Posts
    94

    Default

    Quote Originally Posted by sunray73 View Post
    Wilton's Glycerine
    *around the cake baking area*

    High Loft Quilter’s Polyester Batting
    *around the sewing Dept.*
    I should mention that none of the Walmarts near me, including Super Walmart, carries the glycerine. They carry other Wilton items like Vanilla, but not glycerine. I have gone several times to these stores and I have never found it there so YMMV. I have found it, however, at other local craft-type stores.

    You are correct on the batting. I mentioned in was in the "craft" area which is also by the sewing area. At least by me they have many many bags of the stuff taking up a pretty long shelf. Lots of choices, but the one I mention in the OP works well and has no chemicals.
    Last edited by C6Silver; 08-05-2009 at 06:08 PM.

  4. Advertisement
  5. #13
    Full Member
    Join Date
    Jul 2009
    Posts
    44

    Default

    Quote Originally Posted by C6Silver View Post
    I should mention that none of the Walmarts near me, including Super Walmart, carries the glycerine. They carry other Wilton items like Vanilla, but not glycerine. I have gone several times to these stores and I have never found it there so YMMV. I have found it, however, at other local craft-type stores.

    You are correct on the batting. I mentioned in was in the "craft" area which is also by the sewing area. At least by me they have many many bags of the stuff taking up a pretty long shelf. Lots of choices, but the one I mention in the OP works well and has no chemicals.
    So I hit Walmart yesterday looking to stock up on a few supplies mentioned on the list and came back with zip... I found a couple of things but not others like the Glycerine. I think I might just buy some of the stuff online and save the headaches...

  6. #14
    Full Member ECF Veteran
    Join Date
    Jul 2009
    Posts
    94

    Default

    Quote Originally Posted by sunray73 View Post
    So I hit Walmart yesterday looking to stock up on a few supplies mentioned on the list and came back with zip... I found a couple of things but not others like the Glycerine. I think I might just buy some of the stuff online and save the headaches...
    Yes, this is why I have mentioned a few times that the glycerine isn't at Walmart. Now they do have some in pharm, but it isn't the Wiltons stuff that I discussed.

    You said you came back with "zip" but that you also found some stuff, so I am not sure what you weren't able to find that you should have at Walmart.

    Anyway, none of this stuff has to be bought at Walmart. I used it as an example. Some places in the country don't have Walmart anyway.

  7. #15
    Full Member
    Join Date
    Jul 2009
    Posts
    44

    Default

    They had a few things but I ended up just going over to Michael's Craft store which had just about everything on the list. I ordered the Menthol Crystals & LORann flavors from ebay, 18 flavors of what ever flavors for $23 shipped. Pretty good deal. Amazon has an awesome deal on Now VG 16ounce (2 pack) for $16. That should last for a loooong time of vaping

  8. #16
    Senior Member ECF Veteran
    Join Date
    Jul 2009
    Location
    Independence, MO
    Posts
    256

    Default

    Quote Originally Posted by C6Silver View Post
    Since this thread has resurfaced, I will add one update. The syringe I purchased and linked to above doesn't work as the juice is too viscous. I will likely stick with the eye dropper approach which has worked well for me.
    It works fine you just have to take your time with it.

  9. #17
    Full Member ECF Veteran
    Join Date
    Jul 2009
    Posts
    94

    Default

    Quote Originally Posted by SantanzChild View Post
    It works fine you just have to take your time with it.
    I don't know what this means. Granted I am no expert with a syringe, but either the liquid can enter through the needle or it cannot. If I fill a cup of water and test with that, it works fine.

  10. #18
    Supplier Associate ECF Veteran RenaissancePuffer's Avatar
    Join Date
    Jul 2009
    Location
    Twin Cities, MN
    Posts
    892

    Default

    Quote Originally Posted by C6Silver View Post
    I don't know what this means. Granted I am no expert with a syringe, but either the liquid can enter through the needle or it cannot. If I fill a cup of water and test with that, it works fine.
    You more than likely need a larger gauge syringe (IMO 22 gauge recommended by the OP, are a bit small).

    I use a 50/50 PG/VG mix for my liquid. The 20 gauge syringes that I have are way too small and even though it can pull the liquid up, it's not very easily done. I am thinking of getting some 18 gauge syringes to try out.

  11. #19
    Full Member
    Join Date
    Jul 2009
    Posts
    53

    Default quick question...

    Quick question: I just picked up some distilled water + HUMCO glycerin and was wondering what a good mix of the two is if I wanted to cut down some high MG nic liquid? I've heard 10%, 15%, and some say 50%? (50% water and 50% HUMCO glycerin that is...)

    What do you guys think? Thanks!

  12. #20
    Supplier Associate ECF Veteran RenaissancePuffer's Avatar
    Join Date
    Jul 2009
    Location
    Twin Cities, MN
    Posts
    892

    Default

    I usually use 50% PG nic juice, 40% VG and 10% flavoring. If already flavored PG and no extra flavors are needed I cut it 50/50. No issues at all, vapes great.

+ Reply to Thread
Page 2 of 4 FirstFirst 1234 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

SEO by vBSEO