Most RELIABLE 801-compatible atty/supplier?

[bluesuede]

I like the 4 hole 801 attys I got from EM. They truly are different than the 801 attys I got from HG. Noticed the difference right away. Heck, I like their batts better too as they don't have those silly recessed buttons that get stuck all the time. Irritating little buggers.

I'm still using the original attys that I got 9/20 and haven't cleaned any of them yet. There hasn't been a need to. I rotate 2-3 daily. Maybe they will all take dump at the same time.

[Big Daddy]

I too have been through many of all the different atty's. In my experience the ones from Janty rank right up there, but the BE-112 is much better not only for high voltage (going on 4 weeks with first one at 6 volts)but also much cheaper. I get mine from ELECTRONIC CIGARETTES / E-LIQUID/E-CIGARETTE LIQUID / E-CIGS / E-Cigarette / Houston, TX They are us based and the price and speedy deivery are great. Plus shipping is free. I get a 5 pack in a really nice chrome (they also have black and white) for $45 to my door. He is also super fast to answer emails. It's doesn't specify on the site for the 5 pack of atty's but they are indeed BE112's. I think you will be very happy with those. The one I use has lasted longer than any other and performs well with high volts and 3.7

Thanks for the site with the BE-112's just ordered a 5pack Thank Again.

[smonomo]

Hi there 801 fans

Well, after much diligence I was just about to post this new thread in General discussion..

Okay, I'm ready to order some atomizers, I was at a US site the other day that had BE112 attys 5 pack for $45, free shipping, I thought I bookmarked it, but I guess not, and I'm damned if I can find it again..

So now I'm looking at TW 801 5 pack $35 plus $7 shipping, I already have two TW 801's and they work fine, but I'm tempted to try the BE112's

And now, adding to my dilemma, I'm looking at the M201's

Talk to me people..

And then Parmacrafter saved the day..

I too have been through many of all the different atty's. In my experience the ones from Janty rank right up there, but the BE-112 is much better not only for high voltage (going on 4 weeks with first one at 6 volts)but also much cheaper. I get mine from ELECTRONIC CIGARETTES / E-LIQUID/E-CIGARETTE LIQUID / E-CIGS / E-Cigarette / Houston, TX They are us based and the price and speedy deivery are great. Plus shipping is free. I get a 5 pack in a really nice chrome (they also have black and white) for $45 to my door. He is also super fast to answer emails. It's doesn't specify on the site for the 5 pack of atty's but they are indeed BE112's. I think you will be very happy with those. The one I use has lasted longer than any other and performs well with high volts and 3.7

So the BE112 is the winner

[Mikie Likes It]

Hello. I also use a 6v Prodigy exclusively with the 801/compatible. From my experience, I get the thickest, tastiest smoke and best throat hit from the DSE801, but that is not what I recommend. IMO the DSE801 hits the best, and holds the most amount of fluid before leaking (4-5 Drops), but it has to cool down for so long, before it will wick between hits.
I get my DSE801's from Esmokeytreats, and RockyMountain Vapor

My recent favorite is the Joye 302 - It is my favorite because you hardly have to wait between hits to let it cool down to wick. It cools down very very quickly and wicks great. Now on the downfall, the 302 does not hold as much fluid as the DSE801. I find after filling from completely empty, I put 5 drops, take a small puff, then add 3 more drops. The 3 drops get me 2 awesome hits, great flavor, thick smoke, and great throat hit. Then you have to top off again with 3 more drops. Now, I do find the 302 to leak like a siv. You can even see on the atomizer threads, there are two hole going straight up to the inside of the atty. I have to top off more often with this one, but I feel it performs better and that out ways the leakiness.

I get my Joye 302's from Electronicstix and they have FREE SHIPPING!!! jfi

The BE112- In my experience, is almost the same with the 302 as far as cool down period and wicking. This one also cools fast and wicks awesome. In my experience with this atomizer, I just dont get the full, thick smoke as I do from the 302 or DSE801. The flavor and vapor seem week, and almost like there is too much air getting in the mix. Another complaint I have about this atty, is after about 2 weeks of use, it develops an oily, tar like build up around the coil, which cause a bad taste that will not go away. At this point, I retire and atty and move on.

I get my BE112's from Vaporspot.com - Owner goes in on large owners with her customers. Very cool lady, throws in nice little freebee gifts with her orders too.

The RN4072 - Again, IMO - I dont like at all, too much air, not thick enough smoke, leaks like a siv and the flavor almost tastes metallic with every one I have tried. I cant really say anything good.

I got my RN's from Totally Wicked and Puresmoker.

The M201 - I bought a couple of these, and just to let everyone know..... -From LiteCig

THE M201 DOES NOT WORK WITH THE PRODIGY V!!!!!!!!!!!!

After screwing on the 201, go to take a puff, and nothing. No air can even pull through it is completely locked up.



Again, this is only MY experience with the 801/compatible atomizer vaping at 6 volts with my Prodigy V1 and also my GGT. Some of these attys, may work 100 times better than I described with a different device, voltage, or even user at that.

Are there any other kind of 801 compatible attys out there that I havent mentioned?

[tribalmasters]

801s ROCK!! I have been very happy with most of the atomisers I have ever bought because I also drip. Some become wimps or start becoming leaky long before others. Not a problem with TW ones and ones from Smokejuice or iVapour until week 2 but that is good for me

[smonomo]

Ughh!...Just tried to order the BE112's from E-Cigarette Houston..

PayPal says..The recipient is unable to receive money



Now let me get this straight,
DSE801's are high bridge?
TW RN4072, and BE112 are low bridge?

[DonDaBoomVape]

Hello. I also use a 6v Prodigy exclusively with the 801/compatible. From my experience, I get the thickest, tastiest smoke and best throat hit from the DSE801, but that is not what I recommend. IMO the DSE801 hits the best, and holds the most amount of fluid before leaking (4-5 Drops), but it has to cool down for so long, before it will wick between hits.
I get my DSE801's from Esmokeytreats, and RockyMountain Vapor

I see that Esmokeytreats attys are $1 more than RMV and they charge $6-$12 for shipping vs. RMV's free shipping. Are Esmokeytreats' attys any better?

The BE112- In my experience, is almost the same with the 302 as far as cool down period and wicking. This one also cools fast and wicks awesome. In my experience with this atomizer, I just dont get the full, thick smoke as I do from the 302 or DSE801. The flavor and vapor seem week, and almost like there is too much air getting in the mix. Another complaint I have about this atty, is after about 2 weeks of use, it develops an oily, tar like build up around the coil, which cause a bad taste that will not go away. At this point, I retire and atty and move on.

I am very sorry to hear that. Based on the posts here (and elsewhere), I thought I had identified the optimum penstyle atty.

I get my BE112's from Vaporspot.com - Owner goes in on large owners with her customers. Very cool lady, throws in nice little freebee gifts with her orders too.

I just visited her site. Excellent prices! Her BE112 attys are $.50 less than RMV's low $7 price for DSE801s ... and the BE112 passthrough for $9.45 is unbelievable: $4.55 less than RMV's (DSE801 manual) passthrough. [I don't see a button in the photo. Is it an auto switch passthrough?] Sorry to see she doesn't seem to carry batteries (or much of anything else, for that matter).

She has that $6 shipping charge, so it's pretty much a wash. But I'm tempted to try a couple attys and that PT (I don't have one yet for the 801/112/4072) ... and cross my fingers.

The M201 - I bought a couple of these, and just to let everyone know..... -From LiteCig

THE M201 DOES NOT WORK WITH THE PRODIGY V!!!!!!!!!!!!

After screwing on the 201, go to take a puff, and nothing. No air can even pull through it is completely locked up.

Sorry to hear that you were blindsided by this. Learn a lesson from it and read my WWV Illustrated Guide.

I know you are strictly a Prodigy user, but (by chance) have you tried the M201 atty with the M201 battery. Actually, I spend more of my time vaping penstyle than Prodigy-style. I like long, liesurely vaping sessions.

Are there any other kind of 801 compatible attys out there that I havent mentioned?

Nope ... I think you've got it covered!

[Discraft]

I have a BE112 from E-Cigarette Houston on its way supposedly. Im hoping this will be at least better than my high bridge I currently have. Will post back.

[Discraft]

Got my BE112 today. Ordered it on Thursday got here Monday. I was probably one of the last people able to use paypal. Came from electroniccigarettesofhouston.com

Looks just like my high bridge atty but its a low bridge. Working well so far. Probably order a 5 pack in the future. Ordered the chrome one if that makes a difference to anyone.

[DonDaBoomVape]

Hey Don check out besteciggy.com, hes a local guy (well he is for me lol) and his names gary. I bought my first 801 about 6 months ago and when i bought it i bought an extra one from him..idk y his replacement one's do as well as they do but they are great. check it out someday and C if im the only one that loves it . Ive tried a couple other 501"s and a 901 but nothin creates enough vape for me exept the 801's he's got!!

I have just now checked out that site. Egad! His prices are exorbitant - about twice what many others charge for penstyles (or their parts). For example, check out Rocky Mountain Vapor, Good Prophets, or E-SmokeyTreats (only parts). And, at some point, I may break down and order the marble 801s from EastMall (5 complete e-cigs, no charger: for $75 + $15 shipping = $18/e-cig)

More likely, I may give up on the DSE801/BE112/RN4072 and focus on my new 510 and/or try the incompatible M201 from LiteCigUSA. You see, I tried the BE112's from The Vapor Spot and I'm disappointed - not with their service or prices - but with the BE112 attys. Not nearly as effective as most of the 801s I've used ... and the BE112 passthrough (no longer on their site) is terrible. Subjectively it seems to be putting out 2 volts.

Oh woe is me!