+ Reply to Thread
Page 4 of 4 FirstFirst 1234
Results 31 to 37 of 37
Pen-style e-cigs in Model Specific Discussion; My BE112's from Best E Cig came in today. Dang!!! is all I can say. I'm a newbie and I've ...
  1. #31
    Full Member
    Join Date
    Dec 2009
    Location
    Berea, Kentucky
    Posts
    20

    Default BE112 from best E-Cig

    My BE112's from Best E Cig came in today. Dang!!! is all I can say.
    I'm a newbie and I've been vaping a 510 at 24mg and liking it for a couple weeks. I'm down to just a few analogs per day, but still using them. I thought crap, now I'm addicted to both. If I held my hits from the 510 and vaped for about 30 mins I could nearly satisfy my nic craving. I just tried the BE112 with an auto battery and 36mg MB juice, thinking this is going to taste like Chinese socks. I was surprised It vapes like a fog machine. Even if I hold the hits I stil get vapor out. Also at 36mg 10 minutes of vaping and I began to get a Nicotine headache. I looked at my cigs, gagged and threw them behind my desk. I know auto batteries aren't the rage, but I can tap on bang on this guy and not get an accidental discharge. This is going to be handy in the car. I just got 5 more bats and attys and adaptor for the SB I have coming. Can't wait to make 36mg coconut, caramel, or something less sock like. Even so the Best e Cig 36mg MB isn't too bad.

  2. Advertisement
  3. #32
    Super Member ECF Veteran
    Join Date
    Jun 2009
    Location
    in the MEDIUm
    Posts
    441
    Blog Entries
    9

    Default

    801! all the way

  4. #33
    Moved On
    Join Date
    Feb 2009
    Posts
    2,207

    Default

    I quit analogs on an 801/penstyle device. They are dear to my heart. Now, I use a 6 volt custom battery pack to power 801 and BE112 atomizers. Vapor production and throat hit are absolutely tops. For best overall performance, a 6 volts power source and a BE112 is pretty hard to beat.

  5. #34
    Full Member
    Join Date
    Nov 2009
    Location
    west of Ft. Worth, Texas, USA
    Posts
    24

    Default

    Quote Originally Posted by VR59 View Post
    One other quick item, has anyone tried the Jaaxx method on the BE 112's? Not that I need too, (yet?), just curious as they ride much lower in the tube and my handy paper clip is bent to just the right length for the DSE 801's.
    I'd also be interested in hearing if this resurrection method works on a BE112 atty, and what (if any) differences there may be in the procedure.

    anyone?....anyone?....Beuhler?


    Oh...and the BE112 also is near to my heart for giving me a good enough alternative to analogues!

  6. #35
    Bird Brain ECF Veteran
    Supporting Member
    Poeia's Avatar
    Join Date
    Dec 2009
    Location
    New York
    Posts
    3,919

    Default

    I know I replied on this thread last night. Apparently my brain is Gone with the Vapor and I closed the tab without posting.

    Don, if you change your mind about the totally marble look, a black atty looks good with a marble batt. I got my starter kit at EastMall and knew I needed more than 1 atty but they only had marble as part of the kit. (Black with a red batt would probably also look nice.) Also, I don't see the 5/5/$75 offer there. Must be a thing of the past.

    I spent most of yesterday reading about e-cigs and the more I learn, the more confused I get. Realizing that I need more than 2 batts and 4 attys, I finally figured out that I'm definitely buying additional batts & attys for my 801 plus a 501... unless I get only attys for the 801 and buy a Prodigy or Protege to power that plus the 501... or I could skip the 501 and buy both 801 batts and attys and a Prodigy/Protege.

    Which brings me back to the subject of this thread -- compatibility with 801s. Are you all saying that, in theory at least, the Joy 302, DSE 801, RN 4072 and the BE 112 are interchangeable? I could make a Frankenstein's monster e-cig comprised of a 302 cart, a 112 atty, 801 adapter, a Prodigy and have spare parts from a 4072 hanging around to replace any of the above?

    I think my head might finally explode from dealing with all the new variables in my purchasing decision but knowledge is good.

    ==>

  7. #36
    PV Master Registered Reviewer/Blogger
    ECF Veteran
    Supporting Member
    DonDaBoomVape's Avatar
    Join Date
    Jun 2009
    Location
    South Florida
    Posts
    3,359

    Default

    Quote Originally Posted by lhaddix View Post
    My BE112's from Best E Cig came in today. Dang!!! is all I can say.
    I'm a newbie and I've been vaping a 510 at 24mg and liking it for a couple weeks. I'm down to just a few analogs per day, but still using them. I thought crap, now I'm addicted to both. If I held my hits from the 510 and vaped for about 30 mins I could nearly satisfy my nic craving. I just tried the BE112 with an auto battery and 36mg MB juice, thinking this is going to taste like Chinese socks. I was surprised It vapes like a fog machine.
    You have just discovered the under-recognized wonders of the penstyle! I happen to prefer the DSE801 and M201 over the BE112 (but don't tell Sun, because he'll yell at me). And I've just placed an order for my first Joye302 (highly recommended by Hellen A Handbasket). But I'll vape any penstyle over any other atomizer (although GreenCig carts on a Kr8 battery are wonderful for my 0 nicotine, pacifier vaping).

    Quote Originally Posted by Poeia View Post
    ...Don, if you change your mind about the totally marble look, a black atty looks good with a marble batt. I got my starter kit at EastMall and knew I needed more than 1 atty but they only had marble as part of the kit. (Black with a red batt would probably also look nice.) Also, I don't see the 5/5/$75 offer there. Must be a thing of the past.
    Yep. It's now 3fers: 3 attys for $17.70 and 3 batts for $25.50; and I don't see any bulk prices on kits.

    Quote Originally Posted by Poeia View Post
    ...Which brings me back to the subject of this thread -- compatibility with 801s. Are you all saying that, in theory at least, the Joy 302, DSE 801, RN 4072 and the BE 112 are interchangeable? I could make a Frankenstein's monster e-cig comprised of a 302 cart, a 112 atty, 801 adapter, a Prodigy and have spare parts from a 4072 hanging around to replace any of the above?
    Forget "theory." All those models are compatible and interchangable. [The M201 atty is the only penstyle that won't work on those others batteries. Its battery works with their attys however.]

    If you think that is a Frankenstein's monster, you should see my 801 atomizer + adapter + XL 380 mAh Kr8 battery! Now that is a long e-cig. Vapes like a champ though.
    "I am, therefore I think ... differently from most apparently." – Don DaBoomVape


  8. #37
    Full Member ECF Veteran
    Join Date
    Mar 2009
    Posts
    137

    Default

    Ive been using 6-7 be112s since march of 09, every single one still works to some extent. Some are unusable but will hiss and glow red hooked to a battery however they all work. I got 2 801s from some site (dont remeber which) one blew when my juice box shorted and stayed on until the coil blew (melted the box!!!) and the other I had got a horrible, horrible taste and I lost it in the 2 months of no use. Havent had one single analog since the end of march thanks to bestecig.

+ Reply to Thread
Page 4 of 4 FirstFirst 1234

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

SEO by vBSEO