+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 10 of 16
New 801 cant believe the quality of the vapor. in Model Specific Discussion; i started vaping about 5 months ago with a 901 from china. i was extremely happy with it and have ...
  1. #1
    Unregistered Supplier
    Join Date
    Jul 2009
    Location
    Calgary Alberta
    Posts
    31

    Default New 801 cant believe the quality of the vapor.

    i started vaping about 5 months ago with a 901 from china. i was extremely happy with it and have started ordering kits for all my friends. i figured if i am going to be getting others into it i should try a couple other models. i got my 801 from a canadian supplier and ended up getting a PT and atty instead of a kit because he didnt have the chargers in stock.

    needless to say i do not like this mode at all. the vapor production lacks in comparison to my 901. i have to refill the carts more often ( i average 8 drops in my 901 and only 5 in my 801. i have yet to fill a cart on my 801 without having it flood the atty. is there something i need to do with my 801 diffrent than my 901 that will make the vapor production and throat hit better or is the 801 just a lesser model?

    thanks for all the help

  2. Advertisement
  3. #2
    Moved On
    Join Date
    Feb 2009
    Posts
    2,207

    Default

    I quit analogs on an 801 device. Suffice it to say, I am partial. I recently won a free 901 starter kit from Good Prophets and could easily have quit analogs with that setup. Yes, the 801 style device produces cooler vapor than a 901. That said, it works fine. If you mate an 801 with a 5 or 6 volt device, it performs even better. If you are impressed with the 910, I understand the 510 might be your next device, unless you are ready to make a move to a custom battery pack.

  4. #3
    Ultra Member ECF Veteran MaxUT's Avatar
    Join Date
    Jul 2009
    Location
    Ogden, UT, US
    Posts
    1,977

    Default

    I add 10-12 drops normally when I top off my 801 carts.

    I replaced the stock cart filler with Aquaclear filter foam and am very satisfied with the performance. It lasts for about 4 days before the wicking slows down and then I replace it.

    It will flood if I leave my PV mouthpiece-up soon after filling the cart, but if left horizontal it's okay.
    "There is no distinctly native American criminal class except Congress." -Mark Twain

  5. #4
    Unregistered Supplier
    Join Date
    Jul 2009
    Location
    Calgary Alberta
    Posts
    31

    Default

    thanks for all the help guys. i think i will just leave my 801 for a rainy day.

  6. #5
    Moved On
    Join Date
    Nov 2009
    Posts
    1

    Default dse 801 and jky 302

    Quote Originally Posted by vapin_calgary View Post
    i started vaping about 5 months ago with a 901 from china. i was extremely happy with it and have started ordering kits for all my friends. i figured if i am going to be getting others into it i should try a couple other models. i got my 801 from a canadian supplier and ended up getting a PT and atty instead of a kit because he didnt have the chargers in stock.

    needless to say i do not like this mode at all. the vapor production lacks in comparison to my 901. i have to refill the carts more often ( i average 8 drops in my 901 and only 5 in my 801. i have yet to fill a cart on my 801 without having it flood the atty. is there something i need to do with my 801 diffrent than my 901 that will make the vapor production and throat hit better or is the 801 just a lesser model?

    thanks for all the help
    Have you tried the jky 302 pen style, I like it as well as my 801 same big carts and same great vapor

  7. #6
    PV Master ECF Veteran tribalmasters's Avatar
    Join Date
    Jul 2008
    Location
    United Kingdom
    Posts
    3,750
    Blog Entries
    1

    Default

    I don't even bother with carts in my 801, it doesn't work properly with them so drippig 2 or 3 drops into the atomiser is the best way.




  8. #7
    Super Member ECF Veteran JDSupreme's Avatar
    Join Date
    Dec 2009
    Location
    Pittsburgh, PA
    Posts
    641
    Blog Entries
    1

    Default

    510 PT with an 801 atty is my combo of choice right now. Love the taste and vapor production. Calling it my 810

  9. #8
    Super Member ECF Veteran kevbow's Avatar
    Join Date
    May 2009
    Location
    CT
    Posts
    967

    Default

    Just ordered a prodigy V2 with an 801 atty. Doesn't come with carts. I do have some RN4062/dse701 carts around that I use for my e-cigar. Will those carts fit the 801 atty?
    administrator


  10. #9
    Moved On
    Join Date
    Aug 2009
    Location
    Michigan
    Posts
    1,130

    Default

    I've never been able to get 801 carts to wick properly. Didn't matter if the attys are high or low bridge. Just never worked.

    That being said, I do love the low bridge 801's and 302's for dripping on my JS with PT.

  11. #10
    Pickin' Member ECF Veteran
    Supporting Member
    BanjoMan's Avatar
    Join Date
    Sep 2009
    Location
    Greensboro, NC
    Posts
    2,548

    Default

    IMO the 801 performs far better with either a 5V passthrough or something that will give you "full" 3.7v battery performance (like a KR808 battery with a 901/801 adapter, or a Janty/Joye Stick).

    Good luck.
    Smoke-free since November 17th, 2009!
    DSE901, M401, 510, Little Chuck, Joye Stick, Bartleby, WetBox, Little Sister VV, Big Brother.
    Thousands saved on cigarettes, thousands spent on e-cigs and supplies.
    (- )==='=~

+ Reply to Thread
Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

SEO by vBSEO