+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 10 of 18
901 atomiser in Model Specific Discussion; I finally had a 901 atom dye on me. so i dismantled it distructive style and found that what killed ...
  1. #1
    Ultra Member Verified Member
    ECF Veteran
    lordmage's Avatar
    Join Date
    Dec 2008
    Location
    Dundalk,Maryland, USA
    Posts
    2,942

    Default 901 atomiser

    I finally had a 901 atom dye on me. so i dismantled it distructive style and found that what killed it. was a disconnected seal of sorts i think it was a soft seal between the metal of the atom and the case which when that failed it added to the restiance and stopped it from working as designed
    Regards,
    Mage


  2. Advertisement
  3. #2
    Member
    Join Date
    Mar 2009
    Location
    new york
    Posts
    1

    Default I've yet to find an atomizer to work for me

    I had purchased 2 DSE901 starter kit (to split with a friend), each with 1 atomizer and 2 batteries from Altsmoke, and more DSE901 - 6 atomizer and 4 batteries from Dietsmokes and they all die out after 6 or 7 puffs. IS THIS NORMAL?

    I ordered for me and a friend, originally we each got a starter kit from Altsmoke. We were both very excited about e-cigs, and had done much research and viewing the videos. We charged up the batteries.. just as instructed to do for 4 hours. We assembled the battery, atomizer and cartridge that came with the kit.

    We sat back to begin the experience. The first puff was heavenly, it was nice to be smoking a long overdo safe cigarette. A nice slow drag on the cig, a burst of smoke in my mouth, a long inhale, and that finale of a long slow exhale. Ahh, yes, it was heaven.

    After 6 or 7 puff the experience began to change. No longer was a nice slow drag producing a burst of smoke. Now it was a long hard suck (or 2) that only produced puny whispers of smoke. I thought maybe the cartridges were a little dry from being pre-filled. I added a drop or two of my flavored liquid and sat back to resume that heavenly state.

    Nope, no longer was I able to take a puff and produce smoke, I had to suck it out, until it wasn't producing anything. (FYI, I did take breaks when the atomizer got warm.) My throat began to get sore from the many attempts, so I put it down. I sat at my computer and emailed the seller. I was given instructions on how to return my atomizer and receive a new one.

    oK.. so now my experience was being put on hold because it was the only atomizer I had (the purchase from dietsmoke hadn't arrived yet). However, my friend was still using it. We spoke of, and shared the experience we had. I found that the other atomizer was working, but my friend also had to suck out the puny wisp of smoke that the dse901 produced after taking several good puffs.

    When we received our second shipment from Dietsmokes we thought, Yea, now we're ready to roll.. Well, I have now tried all the atomizer, and all the batteries. I find that I am only able to get several puffs before I need to add more drops of liquid, and even then I am only getting puny wisp of smoke unless I suck two or three times.

    Is there any advice or suggestions from the many pros out there, that you can give me, so that I may continue to experience that heavenly pleasure that comes with the first puffs for a longer amount of time. I feel it is not worth the energy if I need to stop and refill every 6 or 7 puffs..

  4. #3
    Full Member
    Join Date
    Feb 2009
    Location
    Sunny South Africa
    Posts
    24

    Default

    This a very weird. I have a couple of 901's (and am a newbie myself) and haven't had the same experience at all. My first atomiser did start lagging after 2-3 weeks and a clean helped it immensely. However, there is no way (that I'm aware of) that will result in hard drags within the first cartridge even.

  5. #4
    Supplier Associate ECF Veteran QueenInNC's Avatar
    Join Date
    Feb 2009
    Location
    Charlotte, NC USA
    Posts
    2,503

    Default

    Is it possible that the new atomizers are 4075s? I have no luck interchanging those parts. I get little to no vapor using a 4075 atomizer on a 901.

  6. #5
    PV Master ECF Veteran The Wiz's Avatar
    Join Date
    Feb 2009
    Location
    The Emerald City,Oz
    Posts
    8,503

    Default

    Quote Originally Posted by lordmage View Post
    I finally had a 901 atom dye on me. so i dismantled it distructive style and found that what killed it. was a disconnected seal of sorts i think it was a soft seal between the metal of the atom and the case which when that failed it added to the restiance and stopped it from working as designed
    What was the "Lifespan" on it Lordmage?The Wiz!
    Smoke-Free since 1-1-2009:)

  7. #6
    Super Member ECF Veteran
    Supporting Member

    Join Date
    Mar 2009
    Location
    Cajunland - Louisiana
    Posts
    741

    Default My new DSE 901's

    I was so happy to receive my three new DSE 901's yesterday. Followed all the instructions to charge batteries, etc.

    First few hits were awesome!. Went visit my parents and took THREE batteries with me. I was there for 2 hours and had to leave to come home to get a charger. I thought, okay, maybe it was shy of a few minutes of the charge.

    Later tonight I went shopping. Had two batteries with me and only tried to vape twice, as I do not vape in the stores. Second vape on the way home, BOTH batteries died. Now, I am talking about a 5 minute ride.

    ANY thoughts on what this problem could be? Surely I am doing something wrong. I have watched every video I could find and yes, I read all instructions.

    I figured with 6 batteries on the 901's and 3 on the EVO... I should be able to vape for a tidbit of a while.

    In fairness to the EVO, John is shipping me a new charger as he feels that is the problem. But I have three chargers on the 901 so surely they can't all be bad.

    Any help is greatly appreciated.... I am getting discouraged.

  8. #7
    Ultra Member Verified Member
    ECF Veteran
    lordmage's Avatar
    Join Date
    Dec 2008
    Location
    Dundalk,Maryland, USA
    Posts
    2,942

    Default

    every one the 1 that died was in roation with 3 others cleaning method was blown out and let dry 8 hours a day when i slept. and a hot water soak weekly. also batt charges always a min of 8 hours per batt.also discovered a test cleaning with vingear killed them 3 total possibly 4 over all. wiz total life cycle was almost 2 months
    Regards,
    Mage


  9. #8
    Super Member ECF Veteran
    Join Date
    Feb 2009
    Location
    LI NY
    Posts
    624

    Default

    I have an RN and I have been puffing with the same atty's for alomost 6 weeks and they are still performing as if they were new.

  10. #9
    Member
    Join Date
    Apr 2009
    Posts
    10

    Default Cleaning the atomizer 901 HELP

    I recently received the black dse901 from e-cigarette-mart and it works well. I am assuming that I should be cleaning the atomizer weekly, but I am reluctant to do so. I have been reading that i need to desolder and resolder etc, and I have no experience with this. I also looked at a diagram on this site, and it has sooooo many parts. Do I just soak the entire atomizer portion of the E-cig?

    Any suggestions are welcome!

  11. #10
    Member
    Join Date
    Apr 2009
    Posts
    6

    Default

    i have been using same atomizer for 6 weeks now good as new. i soak it in club soda for a couple of hours then wash it out under hot water for about 30 sec blow it out then let it dry out over night. i do this once a week. have had no probs at all.

+ Reply to Thread
Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

SEO by vBSEO