LED Lights Up But!!!

[coolone1]

The LED lights up but no vapor. The batt is fully charged and I have tried on multiple atts still no vapor any help?

[HaploVoss]

hmmmm... just out of curiosity - I have had a battery where the positive (center) connection was just a tiny bit too recessed. Just an odd factory defect. Have you tried the staple mod?

Super easy to do.

This works with 901 attys and cartomizers also... try this and if still nothing holler back

http://www.e-cigarette-forum.com/for...atomizers.html

[CJsKee]

Something else you can try...take your atomizer and use your paper clip (or whatever else with a point) and insert into the hole in the bottom of the atty. That has a small rubber ring around it and you can very gently pry it up to make a better connection. I've had to do this several times on various 901s.

[HaploVoss]

Something else you can try...take your atomizer and use your paper clip (or whatever else with a point) and insert into the hole in the bottom of the atty. That has a small rubber ring around it and you can very gently pry it up to make a better connection. I've had to do this several times on various 901s.

Yep that is a good one too... but just like advised, be gentle because some of those things if you aren't careful will 'pop' the o-ring out a bit on one side, and then you have some frustrating times ahead of you

[Ask me how I know... ]

[CJsKee]

Yep that is a good one too... but just like advised, be gentle because some of those things if you aren't careful will 'pop' the o-ring out a bit on one side, and then you have some frustrating times ahead of you

[Ask me how I know... ]

Ahhhh..bummer

[coolone1]

Thanks for the info but what is the paper clip mod? I have been vaping for three weeks so fairly new to this> I have not smoked an analog since I received my 901.

[coolone1]

Sorry I did not see the link that you provided. For the staple

[boxhead]

paper clip thing is make slight hook on paper clip wire, insert in atty center hole, pull up very slightly so as to NOT pull the center pin out of battery.

[boxhead]

and what weird is i thought i just posted the staple mod link some place...
here: New 901 Batts The LED Lights Up

[PurKat]

Ask me how I know...

Thought I would take you up on this. HA!

1. Received my first one, a DSE-901 Auto, however, it is like sucking on a straw, no draw to it. Any advice?

2. Nothing to the flavor either. I used 1/4 no flavor zero nic, 1/2 menthol zero nic , and 1/4 Tobacco flavor zero nic-- I still cannot taste anything. Any advice?

I thought this was going to be a breeze, for me to switch from analogs to vaporing, but right now, I am not getting any satisfaction from the device.

Thanks!

Thanks!