OFFICIAL AvidVaper.com HH.357 discussion thread

[unsure]

Well FINALLY!!!!!!!!!!!!!! Day 2 and now its working like the Video. I was getting really frustrated in the beginning and almost tossed it aside and reordered my normal Ciscos LR510s. From the beginning sticking to the instructions to a TEE the 6 drops flooded it bigtime so blew it off from the connector side and started again with just 3 drops. That worked better. Then it was getting use to the the amount of juice to feed it...too little less vapor and extremely harsh...too much and flooded. Slowly thru out the day I got better and better squonking the right amount of juice from my REO and today it working great. It took a day to break in this atty and to break in ME on using it but it finally happened.

[Cisco]

yes. I put one of your 2.0 306's on there and it did what it was supposed to. all the 357's do the same thing. I need someone who has a darwin and 357's to tell me what they think. It has been this was since the beginning. I have 4 and as far as I can tell, they all do the same thing. same readings no matter where I set it.

ps I have two darwins and the same thing happens on both.

Are you able to meter the 357 or put another 1.5ohm atomizer on the Darwin? Makes absolutely no sense at all why it would do that, it still sounds like the issue is with the Darwin output. I have a Darwin here that has no issues at all with the output on a 357 or any LR 1.5, I can kick it up to 12.7watts, 3amps, 4.3v and it works without issues, not that I would vape at those levels but all the numbers read true.

[Cisco]

Well FINALLY!!!!!!!!!!!!!! Day 2 and now its working like the Video. I was getting really frustrated in the beginning and almost tossed it aside and reordered my normal Ciscos LR510s. From the beginning sticking to the instructions to a TEE the 6 drops flooded it bigtime so blew it off from the connector side and started again with just 3 drops. That worked better. Then it was getting use to the the amount of juice to feed it...too little less vapor and extremely harsh...too much and flooded. Slowly thru out the day I got better and better squonking the right amount of juice from my REO and today it working great. It took a day to break in this atty and to break in ME on using it but it finally happened.

Glad to hear unsure,

There is a smaller window of optimum operation with the 357's, some if not most of the problems I see people having is trying to use their current dripping /drag habits. There is a learning curve and once you find the adjustment that fits your vaping style its like winning the lottery...

Definitely an advanced user product without question.

Cisco

[JDSupreme]

Glad to see you got your cleaning schedule worked out JD, most people wouldn't even consider cleaning their atomizers at all never mind once a day.

A dirty atomizer performs like poo, the wicking gets clogged, the air flow is not optimum, the coil heats unevenly, and could start to leak. If its under performing, clean it, no matter how much time has gone by from your last cleaning, this holds true for any atomizer. If it's cleaned often enough ( use and juice dependent) a quick soak and blow out is all it needs, if you let it go to far it will get to the point were cleaning wont help. If the carbon build up on the coil gets to heavy, you went beyond the point of no return and it will work like crap and probably go cold.

Cisco...

Thanks for the response. Would you say this sounds normal considering my juice? I'm not doing the attys any harm by soaking once a day am I?

Anyone else notice a need for soaking more often?

[Cisco]

Thanks for the response. Would you say this sounds normal considering my juice? I'm not doing the attys any harm by soaking once a day am I?

Anyone else notice a need for soaking more often?

Cleaning will be different for everyone, to many factors are in play here, everyone will have to figure this out on their own, or just clean them regularly. I use a low % vg light colored juice and I clean mine every 2-3 days, before it starts to under perform. Darker, heavy vg, and high sugar content juices might very well need to be cleaned ever day or every other day. Those type of juices create carbon build up pretty quick, it all depends on how much liquid you vape per day and how hard you hit the atomizer.

I scope up Vodka with the atomizer, initially it drips out the connector after 3 or 4 scopes it starts flowing out the connector in a continuous stream, I blow it out and juice it up. I could probably go a week without cleaning. Once you get build up on the coil its hard to get them back 100% unless you dry burn, and we all know how dangerous/costly that can be.


Cisco...

[laurel099]

I just wanted to toss in I hope to see more sealed connector 357's, hopefully in 2.0ohm ROFL!! The first ones never leaked a DROP in over 3 weeks of use I believe. I'm breaking in one with open connector and of course had to go back to wiping. My OCD really likes those sealed bad boys, I had forgot all about having to wipe lol.

[unsure]

Was there a answer given if a ultrasonic cleaner is ok to use on the HH.357?

[Vaporologist]

Was there a answer given if a ultrasonic cleaner is ok to use on the HH.357?

I don't see why it wouldn't be as long as you blow it out from the battery end...

[unsure]

I don't see why it wouldn't be as long as you blow it out from the battery end...

[JDSupreme]

I'm getting way too fast at this lol