Results 1 to 10 of 10

Thread: Kanthal A-1 resistance heating wire - 32 AWG - 0.20 mm

  1. #1
    Registered Supplier - Offline doolak's Avatar
    Join Date
    Feb 2012
    Location
    Germany
    Posts
    32

    Default Kanthal A-1 resistance heating wire - 32 AWG - 0.20 mm

    Hello there again...


    It took a while but now it finally arrived - from now on we can offer you Kanthal A-1 resistance wire AWG 32 (0.20 mm / 0.008").


    It's a high quality Kanthal A-1 resistance wire (FeCrAl alloy) for use at temperatures up to 1400°C (2550°F) - shipped on its own spool.





    Product information:
    - Manufacturer: Kanthal Sandvik Sweden
    - max. continuous operating temperature in air: 1400°C (2550°F)
    - resistance at 20°C: 46.03 ohm/m (14.03 ohm/ft)
    - length: 20 metres (65.62 feet)
    - wire diameter: 0.20 mm / 0.008" (AWG 32)


    As our shop is still under construction it is available on eBay: Our Kanthal A-1 0.20 mm (AWG 32) on eBay


    And of course you can order it here via PM.


    The price for 20 metres is £ 3.50 - the wire is shipped on its own spool.


    Shipping to all over Europe, North- and South America, Australia is £ 3.00 - if somebody needs shipping to other countries, please PM me.

  2. Advertisement
  3. #2
    Registered Supplier - Offline doolak's Avatar
    Join Date
    Feb 2012
    Location
    Germany
    Posts
    32

    Default

    As there were many questions about this: We have Kanthal A 0.16 mm and 0.18 mm and Kanthal A-1 0.20 mm on stock.
    The price is the same for all diameters. All three diameters are now offered at eBay:

    Kanthal A-1 0.20 mm (AWG 32) on eBay

    Kanthal A 0.18 mm (AWG 33) on eBay

    Kanthal A 0.16 mm (AWG 34) on eBay

  4. #3
    Super Member Verified Member
    ECF Veteran
    SirTimmyTimbit's Avatar
    Join Date
    Mar 2012
    Location
    Toronto
    Posts
    456
    Blog Entries
    1

    Default

    It's a very good deal!

    Sent from my HTC EVO 3D X515a using Tapatalk 2

  5. #4
    Registered Supplier - Offline doolak's Avatar
    Join Date
    Feb 2012
    Location
    Germany
    Posts
    32

    Default

    Quote Originally Posted by SirTimmyTimbit View Post
    It's a very good deal!

    Sent from my HTC EVO 3D X515a using Tapatalk 2
    Obviously it was - i did not expect to get such a big response to my Kanthal A-1 offer and so i was really really taken by surprise.

    I thank you all for you orders and hope you will be satisfied with the wire and the wick! If anything is wrong, please tell me! And if everything is nice, feel free to tell it, too - i am happy about every kind of feedback.

    The Kanthal A-1 AWG 32 is out of stock now - it is ordered and will hopefully arrive soon.

  6. #5
    Registered Supplier - Offline doolak's Avatar
    Join Date
    Feb 2012
    Location
    Germany
    Posts
    32

    Default

    Kanthal A-1 is still out of stock at the moment, we hopefully will get a new batch soon.

    We still have Kanthal A in AWG 34 and AWG 33 and we added now Kanthal D in AWG 32:

    Kanthal A 0.16 mm (AWG 34) on eBay

    Kanthal A 0.18 mm (AWG 33) on eBay

    Kanthal D 0.20 mm (AWG 32) on eBay

    We had to adjust the price a little bit as the wire prices vary from time to time, depending on the availability and the supplier we have to choose. You can be sure that we will allways try to find the best solution.


    Sent from my C64 using Tapatalk

  7. #6
    Registered Supplier - Offline doolak's Avatar
    Join Date
    Feb 2012
    Location
    Germany
    Posts
    32

    Default

    Just discovered that i forgot to post it here... We have Kanthal A-1 on stock again.

    Cheers,
    doolak


    Sent from my C64 using Tapatalk
    Last edited by doolak; 11-24-2012 at 11:21 PM.

  8. #7
    Senior Member Verified Member
    ECF Veteran
    48lowes's Avatar
    Join Date
    Nov 2009
    Location
    illinoize
    Posts
    184

    Default Are you still sending kanhal via this ECF thread?

    Quote Originally Posted by doolak View Post
    Just discovered that i forgot to post it here... We have Kanthal A-1 on stock again.
    doolak,
    Your offer is most generous. I'm wondering if I could get Kanthal A1 AWG 32, 33, 34 in your 20m length. I'm just starting into these rebuild-able atomizers and find just getting some kanthal can get confusing and costly. One thing for sure is 20m would last me a very long time, long enough that I could probably pass some of it along. So if it's a go let me know how & how much.
    my thanks for your efforts
    48lowes

  9. #8
    Registered Supplier - Offline doolak's Avatar
    Join Date
    Feb 2012
    Location
    Germany
    Posts
    32

    Default

    Quote Originally Posted by 48lowes View Post
    doolak,
    Your offer is most generous. I'm wondering if I could get Kanthal A1 AWG 32, 33, 34 in your 20m length. I'm just starting into these rebuild-able atomizers and find just getting some kanthal can get confusing and costly. One thing for sure is 20m would last me a very long time, long enough that I could probably pass some of it along. So if it's a go let me know how & how much.
    my thanks for your efforts
    48lowes
    We don't have any Kanthal A-1 AWG 34 at the moment - just AWG 32 and 33. But we have Kanthal A AWG 34 on stock.

    If you want to order please let me know.

    Cheers



    Sent from my C64 using Tapatalk

  10. #9
    Senior Member Verified Member
    ECF Veteran
    48lowes's Avatar
    Join Date
    Nov 2009
    Location
    illinoize
    Posts
    184

    Default Kanthal

    doolak
    Alright, I'd like 20 meters A1 AWG 32 & 33
    20 meters A AWG 34
    48lowes

  11. #10
    Registered Supplier - Offline doolak's Avatar
    Join Date
    Feb 2012
    Location
    Germany
    Posts
    32

    Default

    Quote Originally Posted by 48lowes View Post
    doolak
    Alright, I'd like 20 meters A1 AWG 32 & 33
    20 meters A AWG 34
    48lowes
    PMd you

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •