DSE-601 E-Pipe review part 2 by asidrave in E-Cigarette Reviews; Hi, asidrave.
How often do you carry out atom cleaning?...
-
Hi, asidrave.
How often do you carry out atom cleaning?
-
The next dilemma is what happens when the flue-cured tobacco flavor runs out. Ordering a few bottles of juice from ruyandirect is expensive so I will continue to search out a less expensive alternative.
It's really not all that much when you think about it. You can order 150ml for $59.50 shipped. That works out to just under $0.40 per ml (0.396 actually), which barring a really good deal state side, is about the best price per ml you're going to find.
The only deal that beats Wayne's at the moment is the one David Yang has going...buy 100ml for $50, get 140; buy 200ml for $100 get 300ml. Orders over $200 ship free. Obviously, the more you buy the better the deal, but he doesn't carry Flue Cured.
MyVaporStore now has a 250ml for $109.99 (plus shipping) which works out to about $0.44 per ml before shipping. Most other deals seem to be at the 45 to 50 cent per ml range prior to shipping. Their liquid tends to have very strong flavor, so I'm going to try mixing some of the Virginia and Butterscotch that I have with some glycerin and see how that goes. The BS has a great candy flavor going in and a nice tobacco aftertaste. It's very nice actually, and quite strong so I suspect it should come through. Their liquid isn't great for vapor though (hence the glycerin cut).
One juice that is really good in the 601 is PowerPuff from LitecigUSA. Good vapor, nice throat hit, and the flavor really comes through. Powerpuff is basically RY3 which is less caramel flavor, more tobacco. I like it.
I do have two brand new bottles of Flue Cured that I'm going to have to cut down and try with the 601 now that you've mentioned it Chef. And I hate to say it, but I'm actually a fan of the TAB flavor as well...and I have some of that too. The RY 4 and the 555 I've tried with the pipe don't really come through too well. I got a hint of the RY, but not much from the 555. I've got a new order of both coming from David Yang, so I'm going to give those a shot as well.
-
I am having 2 issues...
1-If I tighten my jewel cap even a LITTLE too much... it gets STUCK ON! I cut my finger open trying to twist it off before I finally decided to put it in the freezer to see if it would shrink the metal and unstick it (worked, but not always gona have a freeer!). Any suggestions?
2- I am getting ZERO vapor after 10-15 puffs. When I check the cart it is still moist just not soaked (for example.. it only takes 2-3 drops to top it off) but I get NO vapor at all. Anyone else have this problem? You think the hole drill in back will help this to free flow of liquid?
The lack of flavor kinda sucks... but it is a very soothing device. Does feel nice to hold and puff.
Last edited by Spikey; 05-24-2009 at 05:52 AM.
-
Ultra Member
ECF Veteran

Originally Posted by
Spikey
I am having 2 issues...
1-If I tighten my jewel cap even a LITTLE too much... it gets STUCK ON! I cut my finger open trying to twist it off before I finally decided to put it in the freezer to see if it would shrink the metal and unstick it (worked, but not always gona have a freeer!). Any suggestions?
2- I am getting ZERO vapor after 10-15 puffs. When I check the cart it is still moist just not soaked (for example.. it only takes 2-3 drops to top it off) but I get NO vapor at all. Anyone else have this problem? You think the hole drill in back will help this to free flow of liquid?
The lack of flavor kinda sucks... but it is a very soothing device. Does feel nice to hold and puff.
1. whenever the cap gets stuck i would "fog-up" the jewel cap and then it would twist off fairly easy with my middle and index fingers. fog-up...like when you use your breath to clean your glasses or use your breath to fog up a mirror.
2. the hole will most definitely help with the flow of the fluid......with the hole, you can also blow into the mouthpiece gently to give the atomizer an extra bit of liquid or just help flow the liquid better.
Last edited by asidrave; 05-24-2009 at 08:13 AM.
2x Provari's w/MAP tanks, RSM Mk4VV and VV Monkeyboxx.
CAUTION: Im vaping @ VV...Keep back 500ft :p
-
Ultra Member
ECF Veteran

Originally Posted by
lovebird
Hi, asidrave.
How often do you carry out atom cleaning?

so far i only have had to clean it once necessarily and that was because i filled a cart with RY4 and i kept tasting the stock pipe cart liquid with the RY4 and it wouldn't produce a heavy vapor. i wanted to burn off the stock pipe liquid taste that wouldn't go away.
2x Provari's w/MAP tanks, RSM Mk4VV and VV Monkeyboxx.
CAUTION: Im vaping @ VV...Keep back 500ft :p
-
Hello!
I'm a long-time pipe smoker and am very interested in this model! But one of the great things about a real pipe is that it is just about the most flavorful way to experience tobacco smoking.
Why in the world would this device transport less flavor than other devices? What could be the cause of that? Could it be fixed with a tweak? Just how much flavor is lost?
Thanks!
-
As we're finding, not all flavors are lost. As we continue to use the 601 I'm sure we'll find several more flavors that don't get lost as well.
Spikey - try pulling out the cart and using the pipe for a while, you may be a little flooded. I was having that exact same problem, little or no vapor. For the hell of it I pulled out the cart, vaped for a while. At first there was very little, then it started getting better, then it was really good, then fizzled. Once the vapor production started to dwindle again I re-inserted the cart and all has been good since.
A pinhole in the back of the cart is a huge help for flow, as Raul has mentioned.
-
Full Member
Spikey, I had the cap on mine get stuck a couple of times also, I used one of those gripper pads used for opening jar lids and it worked perfectly.
Dan
-

Originally Posted by
Danridge
Spikey, I had the cap on mine get stuck a couple of times also, I used one of those gripper pads used for opening jar lids and it worked perfectly.
Dan
X2 - He knows stuff.
Along the lines of asidrave's comment, I will very lightly wet two fingers just enough to get a good grip on the jewel cap. The key is light turning pressure. If you push down on the cap, it becomes harder to get it to start turning.
Last edited by breakfastchef; 05-24-2009 at 01:15 PM.
-

Originally Posted by
thatswhatshesaid
Why in the world would this device transport less flavor than other devices? What could be the cause of that? Could it be fixed with a tweak? Just how much flavor is lost?
I really do not know. The vapor in the DSE601 must travel twice the distance from atomizer to mouthpiece as an 801/penstyle, for example. Perhaps that distance allows for more cooling and condensing of the vapor before it exits into our mouths. Maybe that is why stronger flavored juices seem to come through better than lightly flavored juices.
Last edited by breakfastchef; 05-24-2009 at 04:03 PM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Forum Rules
Bookmarks